A Barrett company - serving Glendale, CA

Unilock Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Kitchen Remodeling: The Glendale Owner’s Guide

If you’re pricing Unilock kitchen remodeling in Glendale, plan on $14,000 – $45,000 installed, with most of that tied to cabinet layout, counters, and the wall prep behind them. We’re an independent contractor, not affiliated with Unilock, and we install their systems alongside KraftMaid and Cambria when the plan calls for it. Whether a job runs three weeks or seven depends on how much of the old kitchen has to come apart. Most Glendale owners start with a single failing piece – a cabinet box that’s gone soft, a laminate top peeling at the seams, a drawer front that won’t sit flush – and only then discover the whole run is out of true. That one bad cabinet is usually the tip of something structural, not a cosmetic nuisance.

Call (844) 560-4526

Which Unilock Models This Applies To

Unilock makes several kitchen lines that overlap in looks but not in dimensions, and that’s where most ordering goes wrong. The cabinet series are the critical match: a door or box pulled from one series rarely fits the carcass of another, and the mounting hardware and shelf spacing change between them. Before anyone measures, find the manufacturer label – usually on the inside of a cabinet door, on the back panel, or under the sink base – and photograph it. If the label is gone, measure the carcass depth and the door thickness; those two numbers narrow the series fast. On the OEM-versus-aftermarket question: if you’re replacing one failing component and want it to match the original exactly, go OEM so the finish and mounting holes line up. If you’re replacing a whole run, quality aftermarket equivalents fit the standard dimensions and cost less. We quote both, in writing, before anything’s ordered.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Kitchen Remodeling Is Failing

Kitchens fail quietly in California. The signs below are the ones we see most in Glendale homes, each pointing to a cause worth understanding before you spend a dollar on parts.

  • A cabinet door that won’t stay closed or sits crooked. Usually a failed hinge or a screw that’s stripped out of particleboard – the board behind the hinge has lost its grip, and re-driving the same screw fixes nothing for long.
  • A soft or swollen cabinet base. Water from a slow leak under the sink wicks into the box and swells it; by the time you feel it, the panel has to be replaced, not sanded.
  • A countertop that’s lifting or peeling at the edge. In laminate, that’s failed adhesive or years of steam from the dishwasher; in solid surface, a crack that started at an overhang with too little support underneath.
  • Drawer glides that grind or stick. Worn runners or a box that’s racked out of square because the cabinet carcass behind it has shifted with the floor.
  • A backsplash or caulk line that’s cracking away from the wall. Movement in the wall or the counter, and a telltale sign the substrate behind it is loose.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing for Glendale runs in these ranges. What drives the top of each range is the state of what’s underneath – out-of-square walls, old plumbing, wiring that needs to move – not the material you picked.

Work Installed range (Glendale)
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

Every quote is line-itemed so you see parts and labor separately, and every price change arrives as a written change order before work moves – not a surprise at the end. The work is backed by our written 90-Day Done Right Promise: if it’s not right, Tom comes back and makes it right, one call. Permits are pulled and inspections signed on every eligible job.

DIY or Call Us?

Some of this you can check yourself. Measure the cabinet carcass, photograph the label, tighten a hinge, feel for soft spots and look for water stains under the sink – all safe and useful. Where DIY goes wrong is in the structural part: re-mounting cabinets to old framing, moving plumbing or gas to fit a new layout, and especially anything touching the electrical for a new counter appliance. Gas lines and kitchen wiring are dangerous, and California code is particular about how they’re run behind cabinets. A wrong move there is a real hazard, not a weekend setback. If the scope is bigger than a hinge or a drawer glide, call us at (844) 560-4526 for a free estimate – no trip charge inside the county, and we’ll tell you honestly what’s worth fixing and what’s worth replacing.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch