A Barrett company - serving Glendale, CA

Unilock Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Bathroom Remodeling: The Glendale Owner’s Guide

Unilock bathroom remodeling installed by an independent contractor in Glendale typically runs $9,000 – $28,000, depending on the size of the room, the tile and vanity you choose, and whether the layout changes. That figure covers tear-out, waterproofing, tile, fixtures, and the permits that go with the job. If you’ve already invested in Unilock materials and something’s failing at the tile, shower pan, or drain line, you’re in the right place.

Call (844) 560-4526

Most Glendale owners find us the same way. A grout line near the shower curb starts crumbling, or a hairline crack runs across a floor tile and comes back no matter how many times it gets patched. Sometimes it’s a soft spot under the toilet, or caulk that pulls away from the wall every few months no matter how carefully it’s reapplied. Behind each of those small headaches is usually the same story: the substrate or waterproofing under the Unilock surface has started to give, and no amount of surface repair fixes what’s moving underneath. We’re an independent contractor, not affiliated with Unilock, but we install their materials and repair what fails around them.

Key Takeaways

  • Glendale Unilock bathroom remodeling: $9,000 – $28,000 installed.
  • Crumbling grout, recurring floor cracks, and soft spots usually point to a failing substrate, not the tile itself.
  • Unilock porcelain and stone formats need a flat, fully cured substrate. Skip that and the surface fails early.
  • Our crew members have up to 28 years of experience installing tile and stone. Every eligible job gets permits pulled and inspections signed.

Which Unilock Models This Applies To

Unilock is better known for pavers and outdoor hardscape, and their porcelain and stone lines carry over into bathroom floors, shower walls, and vanity surrounds. Glendale installs we see most often use large-format porcelain in their U.S. lines, plus stone-look pavers repurposed indoors. The sizing matters here: a 24×24 porcelain tile wants a flatter subfloor and a different thin-set profile than a 12×12, and a stone-look paver set in a wet area needs a waterproof membrane underneath that the paver itself doesn’t provide.

To identify what you’re working with, check the original carton if you kept it, look for a printed name or series number on the back of a loose tile, or measure the actual face dimensions, because nominal size and true size are rarely identical. Unilock does not sell bathroom remodeling as a kit, so there’s no serial number to match. What matters is the format, finish, and whether it’s rated for wet areas.

On the OEM question: you don’t replace the tile from Unilock the way you’d replace a branded appliance part. What you’re really choosing is the underlayment and setting materials. Quality membranes and thin-sets from well-known manufacturers perform as well as anything proprietary, and most installers use them because they’re available and warrantied. KraftMaid, Cambria, and Silestone are other brands we work with on the same jobs when a vanity or counter is part of the scope.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Bathroom Remodeling Is Failing

  • Grout that crumbles near the shower or tub: The substrate is moving or water has gotten behind the tile. Grout is rigid; when the floor flexes, it cracks and washes out.
  • Hairline cracks that reappear after patching: A crack that comes back in the same spot is a movement or deflection problem, not a surface problem. The floor or wall behind the tile is flexing under load.
  • Soft or spongy floor around the toilet: Water has reached the subfloor, usually from a failed wax ring or a slow drain leak. Wood softens and the tile above loses its bond.
  • Caulk pulling away at walls and curbs: Repeated caulk failure points to ongoing moisture or movement at a joint that wasn’t properly supported. Re-caulking treats the symptom.
  • Loose or hollow-sounding tiles: Tap a few with a screwdriver handle. A hollow sound means the tile has separated from the thin-set, often because the area got wet before the bond cured.

California’s dry summers and damp winters are hard on bathroom tile. In Glendale, the inland heat bakes a room that isn’t well ventilated, and moisture from showers sits against the walls and floor longer than it would near the coast. That cycle works on caulk and grout joints year after year, which is why surface repairs in this climate tend to fail faster than owners expect.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s how Glendale pricing breaks down for Unilock bathroom work. These are installed ranges, parts and labor together, not material-only numbers.

Scope Installed Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the range: room size, whether the layout moves (which means plumbing and electrical), the format and finish of the Unilock material, and whether the substrate needs repair or replacement once it’s opened up. Glendale homes built before the 1980s often have subfloor or drain issues that only surface after tear-out. That’s where written change orders matter. Every allowance and every price change comes to you on paper before the work moves, so there’s no surprise invoice at the end. The 90-Day Done Right Promise is written on every contract: if something isn’t right, one call brings us back.

DIY or Call Us?

A few things are safe to check on your own. Look for loose tiles by tapping with a screwdriver handle. Note where caulk is failing. Shine a light around the toilet base for staining. Snap a photo of any printed name or code on the back of a loose tile. Measure a couple of tiles and write the numbers down.

Where DIY goes wrong: replacing a shower pan or re-tiling a wet area means pulling tile, rebuilding the waterproofing, and setting the drain at the right height, and mistakes there usually don’t show up until months later when water is already into the subfloor. Tearing into a shower valve or moving plumbing carries real risk. That’s a stop-and-call. Most Glendale owners who try to patch the surface end up paying for the patch and the repair. Call (844) 560-4526 to schedule a free estimate. A live person answers, day or night.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch