A Barrett company - serving Glendale, CA

Unilock Roofing in Glendale, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Roofing: The Glendale Owner’s Guide

Unilock isn’t a roofing manufacturer. Unilock makes hardscape products – pavers, retaining wall systems, fire features – and that’s the whole catalog. So if you searched “Unilock roofing in Glendale” because a roofer told you that’s what’s on your house, or because you’re trying to price a repair and the name came up on a spec sheet, the first honest answer is that the brand on your roof is almost certainly somebody else. What we do in Glendale is diagnose the actual roof, match the actual material, and install a code-compliant repair or replacement using recognized roofing brands. Roof repairs in Glendale run $400 – $1,800, and full replacements with architectural asphalt shingles land between $8,000 and $20,000 for most homes here.

Call (844) 560-4526

Owners usually call us after a ceiling stain shows up in a hallway, or after a roofer from a phone quote made a brand claim that didn’t add up. If you’re holding a Unilock product cut sheet, we’ll tell you straight what you have and what it needs. Barrett & Sons Construction Glendale is an independent service provider, not affiliated with Unilock or any other manufacturer. We pull permits and sign inspections on every eligible Glendale roofing job, and our technicians have up to 28 years of experience.

Which Unilock Models This Applies To

Let’s clear the air, because there’s a real information gap here that’s costing Glendale homeowners money. The Unilock product lines that exist are hardscape lines: Brussels Block and Brussels Dimensional Stone for paver surfaces, the Beacon Hill and Estate Wall systems for retaining walls, the U-Cara face system, and the various fire pit and grilling surrounds. None of those are roofing. Not one. They’re rated for ground-level and low-wall installs, for foot traffic and freeze-thaw cycles, not for a 4:12 roof pitch and a forty-year weather exposure.

So how does “Unilock roofing in Glendale” happen? Two ways. The first is a misread spec: a roofer reads “U-Cara” or “Brussels” on a product list from the last remodel and assumes it’s roof material. The second is a paver patio that’s now underneath a roof leak, and the two problems got tangled in the same conversation. Either way, before we quote anything, we pull the actual roof material – asphalt shingle, clay tile, metal, or flat built-up – and identify it by weight per square, profile, and firing. Glendale’s tile roofs are common on the older housing stock in Adams Hill, and their underlayment is a different system altogether from a shingle roof.

How to identify what you actually have

  • The shingle tab: asphalt shingles have a manufacturing code stamped on the top edge of each tab – brand and series live there, not on a paver box.
  • The tile underside: clay and concrete tile are marked on the back with a manufacturer and a fire-rating stamp. That’s the spec your permit inspector will check.
  • The panel seam: metal roofing reveals its gauge and base material (Galvalume, aluminum, copper) at every standing seam overlap.
  • The box or cut sheet: any Unilock packaging or literature in the garage is hardscape documentation. If a roofer is citing it, ask for a photograph of the roof material itself.

OEM vs aftermarket, in the world of a real roof material, is a simpler story than the hardscape world. There’s no proprietary Unilock fastener or clip you’re locked into. Once we identify the actual shingle, tile, or metal system, we match an equivalent from a recognized brand – GAF and CertainTeed are the shingles we reach for most often, and we won’t substitute a mystery brand off a van. You’ll see the line item in writing on the estimate with the brand name and the product series.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Roof Is Failing in Glendale

Symptoms matter less than causes. Here’s what we hear most, and what’s usually behind it.

  • Brown ceiling stains after a storm: the water is coming from above and the leak path is not where the stain is. In Glendale the culprit is usually a failed step flashing where a wall meets the roof slope, or a lifted shingle tab at a valley.
  • Granule loss in the gutters: shingles shed granules as they age, and a steady cupful after every rain means the shingle is at the end of its backup layer. When granules go, the shingle is thinner than spec and starts to fail at the tab edges.
  • Curling or clawing shingle tabs: that’s the deck or the underlayment talking, not just the shingle. A shingle that curls up at every tab means the material is past its service life or the roof deck is moving.
  • Cracked or slipped tile: on a clay tile roof in Glendale, a broken tile is a leak path the moment water reaches the underlayment. A tile that’s slid down the slope is sitting right next to a flashing gap. Tile roof repair here runs $600 – $2,500.
  • Loosened or missing fasteners around chimney and skylight: a single missing fastener at a penetration lets water track down between layers. That’s a $400 – $1,800 kind of repair if caught early, a full replacement if it goes a few seasons.

Roofing in the Glendale area takes a real beating from the heat cycles – hot afternoons and cooler nights work the shingle material and the sealant strip year after year. That’s not a Unilock problem, because Unilock doesn’t make roof material. That’s a roofing wear problem, and it has a known address.

Replacement Cost & What’s Included

Here’s where Glendale homeowners get blindsided: national roofing companies quote a number on the phone, then hand over a bill with a dozen line items that weren’t in the first number. We don’t do that. Every scope, allowance, and price change arrives in writing before any work moves. The numbers below are honest ranges for the Glendale market, and they’re the numbers you should be comparing.

Job Glendale installed range
Roof repair (flashing, shingle patch, tile crack) $400 – $1,800
Tile roof repair (cracked or slipped unit, underlayment patch) $600 – $2,500
Full roof replacement (architectural asphalt shingle) $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the range on a replacement: roof square footage, pitch, the number of penetrations (chimney, skylights, vents), whether we tear off the old layer or overlay, and how much deck repair the tear-off reveals. In Glendale’s older housing stock in the Chevy Chase and Glenwood areas, we commonly find the original layer plus a second layer from an earlier remodel – that’s a full tear-off, because the permit inspector signs off on the deck, not just the shingle.

What’s included on a Barrett & Sons roofing job: permits pulled and inspections signed on every eligible job, materials from named brands (GAF or CertainTeed shingles, matched underlayment), cleanup and haul-away, and the written 90-Day Done Right Promise. If something isn’t right after the job, Tom comes back and makes it right – one call. Premium brands carry through our other trades too: KraftMaid and Cambria in kitchens, Silestone alongside Cambria on counters. Standing offers right now: $40 off any repair over $200, a free second opinion on any written estimate, and no trip charge inside the county. Senior and veteran households get a permanent 10% discount.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some checking is safe. Walk the perimeter with binoculars and note lifted shingles, missing tile, or daylight at a valley. Look in the attic on a sunny day – if you can see light through the roof deck, that’s a gap that needs fixing before the next rain. Check gutters for granule loss. If you can do that from the ground, do it, and write down what you see.

What we don’t recommend is getting on the roof to “fix it properly.” Roof work happens at height, on a slope, with a hot surface in the Glendale summer – that’s a fall risk even for someone in good shape, and it gets worse on a pitched tile roof where the surface gives. We’re insured and licensed, and a callback on a job we did is a different kind of phone call than a fall off a ladder. There’s also the permit side: a repair that changes the roof’s coverage or adds a new penetration in Glendale usually needs a permit, and a homeowner performing unpermitted work can end up with an insurance problem down the line. If you’re not sure whether you can do it safely, the answer is no. Call (844) 560-4526 and let us look first.

FAQs

Ready to Get the Roof Done Right?

Barrett & Sons Construction Glendale is owner-operated, founded in 1998, and local. Tom Barrett and his sons run the crews, so the person who quotes the job is the person you’ll see on site. Every eligible job is permitted and inspected, every price change is a written change order before work moves, and every completed job is backed by the 90-Day Done Right Promise. Calls are answered by a live person 24 hours a day, and the standing offers – $40 off any repair over $200, free second opinion on any written estimate, no trip charge inside the county, and the permanent 10% senior and veteran discount – are real and in effect. If you’re not sure what’s on your roof, call (844) 560-4526 for a free estimate. We’ll tell you what you have, what it needs, and what it costs in writing.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch