A Barrett company - serving Glendale, CA

Tremron Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Tremron Kitchen Remodeling: The Glendale Owner’s Guide

A Tremron kitchen remodel in Glendale typically costs $14,000 – $45,000 installed, depending on cabinet layout, countertop material and island scope. We’re an independent service provider, not affiliated with Tremron, and we install Tremron-compatible kitchen work across Glendale with written line-item estimates and permits pulled on every eligible job. Most Glendale owners find out a kitchen element has failed the same way: a soft spot in the cabinet base, a countertop seam that catches a fingernail, or grout that keeps cracking loose after the rainy season. It usually starts slow and then gets obvious.

Call (844) 560-4526

Which Tremron Models This Applies To

Tremron runs product lines in pavers, veneer and hardscape stone rather than cabinets or counters, so when a Glendale homeowner says “Tremron kitchen,” they’re almost always talking about Tremron decorative stone or veneer used as a backsplash, island face or accent wall. The first thing to check is the product label on the original carton, the contractor’s invoice, or a mortar-embedded stamp on the back of the tile. Measure the actual face dimension; Tremron veneer modules historically run in nominal 4×8 and 6×12 face sizes with a real-world thickness around 3/4 inch to 1 1/2 inch, and a mismatch of even a quarter inch shows at the joint line in a Glendale kitchen that gets direct afternoon sun. For kitchen cabinets and counters, note that our primary brands are KraftMaid and Cambria, and we also install Silestone. On the OEM-vs-equivalent decision for Tremron stone: if your piece is still made, matching the exact series beats a color-match import every time. If it’s discontinued, a color and texture match from a current line is the honest path. We don’t stock parts and we don’t carry them on a truck; every material order is quoted in writing before it’s placed.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Tremron Kitchen Remodeling Is Failing

Glendale kitchens run hot in summer and cool hard at night, and the San Gabriel Valley’s dry-wet swing is hard on stone, grout and the cabinet boxes behind them. Here’s what actually tells you something’s wrong:

  • Grout lines cracking in a repeating pattern. Usually movement in the substrate behind the stone, not the stone itself. A 2021-vintage installation over backer board with no movement joint is a common cause in Glendale.
  • Stone pieces lifting at the edge. Adhesive failure, most often from moisture wicking behind the wall in an exterior-facing kitchen wall. If the wall behind feels cool to the touch, that’s a clue.
  • Efflorescence (white powder) at the seams. Water is moving through the assembly and depositing salts. Ignore it and the grout keeps failing.
  • Cabinet doors sagging or rubbing a countertop edge. Cabinet box or hinge fatigue. In older Glendale homes this often shows up around year 10 to 15, faster in kitchens used daily.
  • Countertop seams that catch a fingernail. Adhesive has failed at the seam. Left alone it widens and lets moisture in under the edge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what a Glendale kitchen remodel actually runs when priced as a package, with parts and labor broken out to the line:

  • Full kitchen remodel: $14,000 – $45,000
  • Small kitchen remodel: $9,000 – $20,000
  • Cabinet installation: $4,000 – $13,000
  • Countertop installation: $2,000 – $6,500
  • Backsplash installation (Tremron stone): $800 – $2,500
  • Kitchen island installation: $3,000 – $10,000

What drives the range: cabinet grade and count, countertop material (Cambria and Silestone sit higher than laminate), whether plumbing or electrical gets moved, and how much old material comes out. Every scope, every allowance and every change order arrives in writing before work starts, and every completed job carries the written 90-Day Done Right Promise. If something needs redoing, one call brings us back.

DIY or Call Us?

Some of this is fine to check yourself. You can pull the product label, measure the stone face and thickness, photograph the failed grout pattern, and open a cabinet door to see if the hinge plate is loose. That information helps us quote accurately.

What we don’t recommend: tearing stone off a kitchen wall over what may be a moisture problem, opening up a cabinet box to chase a soft spot, or setting new countertop over a failed substrate. We’ve seen more than one Glendale kitchen where a weekend removal turned into a bigger repair because the wall behind was wet. Cabinet work and stone-setting also require know-how that translates to real money if it goes wrong. Call (844) 560-4526 and we’ll tell you plainly whether it’s a check-it-yourself situation or a brings-us-out situation.

FAQs

How long does a Tremron stone backsplash or veneer installation last in Glendale? Installed correctly over a sound substrate with proper grout and sealer, 15 to 25 years is realistic in our climate. Direct sun and a wall that stays damp will shorten that. Call (844) 560-4526 for a free second opinion on any written estimate.

Can it be repaired instead of replaced? Often, yes. Single-stone repair, grout removal and reseal, and seam re-adhesion are all real fixes when the substrate is sound. If water is getting in behind the stone, repair is a patch, not a solution, and we’ll tell you that straight.

How long does the swap take? A backsplash swap runs one to two days. A full kitchen remodel in Glendale runs three to six weeks depending on scope, material lead times and inspection scheduling. We pull permits and sign inspections, so the timeline includes those steps instead of pretending they don’t exist.

How do you source the part? We order from the manufacturer or their authorized distributor, and the material line is written into your estimate before we order anything. No mystery boxes, no van-brand parts. If Tremron’s line is discontinued, we quote a verified match and you approve it in writing before we order.

We’ve been doing this since 1998, and Tom Barrett’s sons run the crews. Proudly serving local communities for over 29 years. Ask anyone on your street, or look up the license number yourself before you sign anything. Call (844) 560-4526 for a free estimate on your Glendale kitchen project. A live person answers, day or night.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch