A Barrett company - serving Glendale, CA

Techo-Bloc Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Techo-Bloc Kitchen Remodeling: The Glendale Owner’s Guide

We install Techo-Bloc-compatible kitchen remodeling in Glendale, and most full kitchen projects here run $14,000 – $45,000 installed. If you’re replacing a failed part on an existing Techo-Bloc surface or counter, expect a written line-item quote with the part, labor, and any substrate repair called out separately.

Call (844) 560-4526

Owners usually find the problem before they see it. A paver-set countertop starts rocking when you lean on it. A grout joint at the sink goes dark and stays dark. A Techo-Bloc slab face on a peninsula chips at the edge and keeps chipping because a cabinet corner is bearing the load instead of the framing. In Glendale homes built between the 1920s and 1950s, we see this a lot in the older stock around Adams Hill and Chevy Chase, where original cabinets were never built to carry stone. The part didn’t fail on its own. The support under it did.

Which Techo-Bloc Models This Applies To

Techo-Bloc makes modular hardscape and surface products, not traditional kitchen cabinets. So when a Glendale owner says “my Techo-Bloc kitchen is failing,” they almost always mean a Techo-Bloc paver or slab surface being used as a counter, a table, a hearth, or a decorative feature inside a remodeled kitchen. Before we quote anything, we identify the exact line: look for a stamp or label on the underside or a cut edge, and measure the face dimensions to the nearest eighth of an inch. Techo-Bloc face sizes vary by series and by whether it’s the modular or the slab format, and a “close enough” match will show a visible seam against the existing field.

The OEM-versus-aftermarket call matters here. Some Techo-Bloc lines are discontinued or regionally stocked, and an exact-color match may not be available. In that case we tell you plainly, show you the closest current equivalent, and put the color variance in writing before you approve it. We don’t stock parts and we don’t carry Techo-Bloc inventory on a truck – the material is sourced per job. We’re an independent contractor and not affiliated with Techo-Bloc. For the rest of a Glendale kitchen, we also work with KraftMaid cabinetry, Cambria, and Silestone, and we’ll say so once: those brands are looked up before we put them on paper.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Techo-Bloc Kitchen Remodeling Is Failing

  • Rocking or deflection when you lean on it. The surface is spanning an unsupported gap. Under a Techo-Bloc counter or peninsula, that means the cabinet box or framing has moved, not that the stone went bad.
  • Dark, widening grout joints near the sink or range. Water is getting behind the surface through a failed seal. Left alone, it reaches the substrate and the adhesive bond gives out.
  • Chipped or spalled edges on the face. Usually load transfer at a corner where the cabinet doesn’t meet the slab properly. A chip is the symptom; the bearing point is the cause.
  • Cracks running from a cutout (outlet, faucet hole). Stress concentrates at cutouts, and a crack from a cutout in Glendale’s older homes often traces back to a cabinet that was never leveled before the surface went on.
  • Uneven color or efflorescence on the face. Moisture is migrating through the material from underneath. In our dry climate this looks like a stain at first, but it’s a moisture path, and it will keep coming back until the source is closed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A Techo-Bloc surface replacement inside a Glendale kitchen lands inside our standard kitchen range. Full kitchen remodel in Glendale: $14,000 – $45,000. Small kitchen remodel: $9,000 – $20,000. Cabinet installation, which often has to happen to fix the real cause: $4,000 – $13,000. Countertop installation: $2,000 – $6,500. Backsplash installation: $800 – $2,500. Kitchen island installation: $3,000 – $10,000.

What drives the number: whether the substrate has to be rebuilt, whether the cabinet boxes need leveling or replacement, the size and number of cutouts, and access. We quote the part, the labor, and any substrate repair separately so you can see exactly where the money goes. Every price change comes as a written change order before we touch the job. Every eligible job gets permits pulled and inspections signed. And the whole thing is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

Here’s the honest split. You can safely check the material stamp and measure the face. You can run a finger along a chip and see whether the edge is bearing on the cabinet. You can photograph a crack from the cutout. That’s diagnosis, not repair, and it’s useful.

Where it goes wrong: resetting a stone or paver surface on a kitchen counter is load-bearing work with a real injury risk. A Techo-Bloc face is heavy, it comes off fast and without warning once the bond fails, and it will take fingers or a foot with it. We’ve also seen homeowners re-adhere a slab over a soft substrate and crack it within a season. If a piece is loose, don’t weight it or lean on it, and don’t pry it yourself. Call us and we’ll tell you what to check and what to leave alone. Our crew members have up to 28 years of experience, and a live person answers the phone around the clock.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch