Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Glendale Owner’s Guide
Cambridge Pavers driveway repair and re-lay work in Glendale typically runs $7,000 – $18,000 for a full paver driveway install and $3,500 – $11,000 for a paver patio, with individual failed-section repairs priced far lower. We install and repair Cambridge Pavers-compatible systems, and because wet winters and clay-heavy soil are hard on any paver base in Glendale, we get out to look at failed sections quickly. Most owners don’t notice a paver problem until a single unit rocks underfoot, a joint washes out after the first big rain, or a settled corner starts holding water against the garage door. That first wobble is the tell: the surface paver is fine, but the base or the edge restraint underneath has already moved.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers makes several paver families for driveways and patios, and the piece that fails is almost never the paver face itself. It’s the edge restraint, the joint sand, or the compacted base underneath. Matching the right replacement part means identifying your paver’s profile and thickness first. Cambridge driveway pavers commonly run 60mm to 80mm thick for vehicular loads, while patio lines sit closer to 60mm. Pull a loose unit and measure it: thickness, face dimensions, and the chamfer on the edge will tell you which family you have. If you have a leftover paver from the original install, that’s your golden ticket, so keep it.
The OEM-versus-aftermarket call matters more here than on most parts. Cambridge’s own edge restraints and polymeric joint sand are built to work with their profile spacing, and a generic big-box edge restraint with the wrong lip height will let the field spread again within a season. On the paver units themselves, a quality aftermarket paver of matching thickness and a close color can serve for a small repair patch, but blending a new paver into a sun-faded field almost always shows. We tell customers straight: match exact on visible areas, and let us source a Cambridge-compatible restraint and sand for the hidden structure. We’re an independent Glendale contractor and not affiliated with Cambridge Pavers, so we source what fits your system rather than what a single manufacturer requires. We also work with KraftMaid, Cambria, and Silestone on interior projects, but this page is about your pavers.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
Here’s what homeowners in Glendale usually describe to us when they call, and what’s actually going on underneath:
- A single paver rocks or “clicks” when you step on it. The bedding sand beneath it has washed out or the base wasn’t compacted deep enough. Ignore it and the neighbors start rocking within a month.
- Joint sand disappears after rain and weeds sprout in the gaps. In Glendale, winter runoff and the shrink-swell of clay soil pull sand out of the joints. Missing sand lets water into the base, which is where real damage begins.
- Settlement along the driveway edge or against the garage apron. The edge restraint has loosened or wasn’t pinned into solid ground. Without a locked edge, the whole field creeps outward and opens joints.
- Ponding water in one low spot after a storm. A settled section of base is trapping water. Standing water on pavers in Glendale is a base problem, not a surface problem, and it gets worse each wet season.
- Efflorescence, or a white chalky haze that keeps coming back. Moisture is moving through the pavers, usually because the base isn’t draining. It’s cosmetic until it isn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Glendale, a full paver driveway install runs $7,000 – $18,000 and a paver patio runs $3,500 – $11,000. A localized repair, re-sanding, or re-setting a failed section costs a fraction of that, and we quote it as a line item so you see parts and labor separately. What drives the range is square footage, how deep the base failed, whether the edge restraint needs rebuilding, and paver thickness for the driveway versus patio load.
Our quotes are written, line by line, before a shovel touches the ground. Any change in scope arrives as a written change order before the work happens, including a base repair we couldn’t see until we lifted the pavers. Every eligible job has permits pulled and inspections signed, and the work is covered by our written 90-Day Done Right Promise: if we didn’t get it right, you call once and we come back. Free second opinions on any written estimate are always available.
DIY or Call Us?
There’s a safe DIY list and a not-so-safe one. You can absolutely sweep fresh joint sand into gaps, pull up one loose paver to check what’s underneath, and hose off efflorescence to see whether it returns. That’s good detective work, and it tells you what kind of problem you have.
Where it goes wrong is the base. Rebuilding a failed section means lifting the field, re-compacting the subgrade to the right depth, resetting the edge restraint, and re-screening the bedding sand. Do it half-right and the pavers settle again after the first Glendale rainy season, and now you’ve paid twice. It’s heavy, exacting work with compaction equipment most homeowners don’t own. A paver driveway is also a vehicle-load surface, and a sloppy base shows up under a car, not a footstep. If you’ve got a settling section or a jiggling paver, call us at (844) 560-4526 and we’ll look at it and give you a straight answer on repair versus replace.
FAQs
A properly installed and maintained paver driveway should give you 25 to 50 years, and the pavers themselves often outlast the base under them. In Glendale the weak link is the base and joint sand, not the paver. Re-sanding every few years and catching a rocking paver early is what gets you to that upper end. Call (844) 560-4526 for a free look at yours.
Yes. Most single-section failures are repairable, and a localized lift-and-reset usually costs a small fraction of a full install. We only recommend full replacement when the base has failed across the whole field or the edge restraint is gone beyond saving. Call (844) 560-4526 and we’ll tell you which one you’re facing – estimates are free.
A single-section repair is typically a one-day job; a full driveway re-lay runs several days depending on square footage and base depth. We give you the schedule up front so you can plan parking and access. Call (844) 560-4526 to get your job on the calendar.
We match your paver’s profile, thickness, and color to a Cambridge-compatible unit, and we source the edge restraint and polymeric joint sand to fit your existing spacing. If you’ve kept a spare from the original install, bring it out. Call (844) 560-4526 and we’ll sort out the match before we quote the job.
Call (844) 560-4526 to schedule your free estimate. A live person answers the phone around the clock, we’ll come look at your pavers, and you’ll get a written quote with the parts and labor spelled out before anything starts. Proudly serving Glendale and the surrounding communities, with a permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.