Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers in Glendale: The Owner’s Guide to Replacing a Failed Part
We install and repair Oldcastle driveway and paver systems throughout Glendale, and the typical installed price runs $7,000 – $18,000 for a full paver driveway, with smaller repairs and section replacements quoted as line items. If a paver, edge restraint, or base layer has failed, we can usually confirm the part match and give you a written estimate by phone. Barrett & Sons Construction Glendale is an independent service provider, not affiliated with Oldcastle.
Owners usually find the failure the same way. A paver tips slightly underfoot near the driveway apron. Or a joint sand line drains sand into the grass after rain. Or a section near a downspout sinks a half inch and holds water. The older homes along Adams Hill and the Chevy Chase canyon edges see this most in the second dry season after installation, when clay-rich soil has finished settling and the base has given up what it had to give.
Which Oldcastle Models This Applies To
Oldcastle’s hardscape line in California runs under several product families, and the dimensions are the compatibility gotcha. A standard 60mm paver profile is not the same thickness as the 80mm units sold for vehicular use, and a driveway needs the 80mm. Skinny edge courses and accent bands are often a different SKU entirely. Pull two adjacent field pavers and measure thickness with a tape; if they read 2 3/8 inches, you have 60mm units and a pedestrian-rated product under a car, which explains the failure faster than anything else.
Oldcastle sells through independent dealers, so the same profile can carry a different catalog name depending on which yard in Glendale stocked it. Look for the stamped or molded mark on the side of the paver, measure length, width, and thickness in millimeters, and photograph the color and texture in daylight. Those three things plus a photo will match the replacement to the right run.
For a color-matched replacement, OEM through the same dealer is the safe bet. For base, edge restraint, and polymeric joint sand, a quality aftermarket equivalent performs fine and often costs less. What you do not want is a mixed pallet of two different dye lots side by side, because sun-faded California pavers read warmer than fresh stock and the seam shows within a season.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Driveway & Pavers Is Failing
- Rocking or tipping pavers. A single paver that moves underfoot means the bedding layer under it has washed out or compacted unevenly. Left alone, the neighbors move next, because the restraint is no longer holding the whole field tight.
- Sand washing out of the joints. Joint sand draining away after every rain points to missing or failed edge restraint at the perimeter. The pavers spread, the joints open, and the whole system loosens.
- Settlement near downspouts, aprons, or utility boxes. A dip that holds water after rain is usually a base problem, not a surface problem. Glendale’s clay soils swell and shrink, and a base compacted in dry season can drop 1/4 to 1/2 inch the first wet one.
- Efflorescence, chips, and spalling. White powdery bloom is mineral salt drawn to the surface and usually fades. Chipping at the corners of a paver near a turn or the street apron is physical damage and worth replacing before it spreads.
- Weeds emerging from joints, or paver color turning uneven. Weed growth usually means the joint sand layer has thinned and washed low. Uneven color is the older warning – faded field pavers against a fresh replacement seam is the tell.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Glendale, a section repair or paver swap usually lands inside a line item on a larger quote rather than a standalone price. Here’s the range picture:
| Job | Installed Range (Glendale) |
|---|---|
| Paver driveway installation (full) | $7,000 – $18,000 |
| Driveway replacement (remove old, install new) | $5,000 – $14,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway sealing | $250 – $700 |
What drives the number: driveway square footage, how much base needs to be rebuilt versus reused, whether edge restraint is being replaced, and the paver profile and color match. We pull permits where the City of Glendale requires them and we write the scope, the allowance, and any change order on paper before work starts. The work carries our 90-Day Done Right Promise, and our technicians have up to 28 years of experience on hardscape installs. Ask for a written, line-item quote and hold us to it – a free second opinion on any written estimate you’ve already got is also available to you.
DIY or Call Us?
Checking is safe and worth doing. Walk the driveway and mark every paver that moves. Measure two pavers and write down the thickness. Run a hose over the joint sand lines and watch where water pools. Photograph the color in daylight. That homework takes twenty minutes and will make any quote tighter.
The install is where DIY goes wrong for this part. A paver that gets set on a bedding layer that was never compacted or set at the wrong cross-slope will fail again inside a season, and pulling the wrong paver out of the field loosens the field around it. On a driveway with a slope toward the street, a drainage mistake slips water under a neighbor’s slab or a home’s foundation. Base prep and compaction is the whole job, and it’s the part nobody photographs.
Call (844) 560-4526 for a free estimate. If your part fails again inside 90 days, one call brings us back.
FAQs
A properly installed paver driveway with compaction and restraint in place should last 25 to 40 years. What shortens that in Glendale is base failure on clay soils, sun-faded dye lots left mismatched, and edge restraint that gives out early. The surface rarely fails first; the base usually does. Call (844) 560-4526 for an exact quote – estimates are free.
Yes, in most cases a section or single paver can be lifted and reset with fresh bedding and joint sand, and the rest of the field left intact. A base failure under a large area can’t be spot-patched and holds; that one is a rebuild. Pulling old pavers cleanly is the skill that makes a repair or a replacement quote honest. Call (844) 560-4526 for an exact quote – estimates are free.
A single paver or small section repair usually runs a short visit. A full driveway replacement typically runs a few days on site depending on square footage, base prep, and cure time for the setting materials. We schedule the crew and quote the timeline in writing before we start. Call (844) 560-4526 for an exact quote – estimates are free.
We identify the paver by the molded mark, measured dimensions, and a daylight color photo, then match to the same dealer run where color matters. For base, edge restraint, and joint sand, a quality aftermarket equivalent performs to standard and is often the smarter buy. For a dye-lot match on a visible seam, we source OEM through the same dealer. Call (844) 560-4526 for an exact quote – estimates are free.
KraftMaid, Cambria, and Silestone are also brands we install where a job touches them. Whether the part is a paver section on your Glendale driveway or a hardscape tie-in on a patio, the price is on paper before we move a single paver. Call (844) 560-4526 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.