A Barrett company - serving Glendale, CA

Oldcastle Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Oldcastle Bathroom Remodeling: The Glendale Owner’s Guide

We install and repair Oldcastle bathroom components in Glendale, and a full bathroom remodel here typically runs $9,000 – $28,000 installed, with smaller refreshes and single-fixture swaps landing well below that range. Same-day service isn’t realistic on a remodel – nobody rebuilds a bathroom in an afternoon – so we schedule a free estimate first, then book the work. Most Glendale owners don’t come to us looking for a “remodel.” They come because a specific part gave out: a hairline crack spidering across an Oldcastle vanity top, a shower surround pulling away from the wall at the caulk line, a floor tile that’s gone hollow and loose underfoot. That failed part is usually the first thing they notice, and the remodel conversation follows.

Call (844) 560-4526

Which Oldcastle Models This Applies To

Oldcastle covers a lot of ground – cultured marble vanity tops, fiberglass and acrylic shower surrounds, tub kits, and vanity bases – and the part number lives in different places depending on the product line. On cultured marble tops, check the underside of the deck near the backsplash; there’s usually a sticker with the series name and dimensions. On surrounds, look at the back of the largest panel or on the installation lip. Oldcastle vanity bases often carry a stamped or labeled number inside the cabinet, not on the outside face.

Here’s the compatibility gotcha that trips up do-it-yourselfers: Oldcastle vanity tops are typically sized to a nominal width, but the actual molded measurement can run a quarter inch either side of the label. Measure the cabinet opening and the old top separately before you order anything, because a “36-inch” replacement that measures 35¾ won’t sit right on a cabinet framed to true 36. The same rule applies to surrounds – panel widths shift between series, and a panel that’s off by a fraction won’t seam cleanly at the corner.

OEM versus aftermarket is a real decision on Oldcastle. OEM gets you an exact fit for the series you have. A quality aftermarket piece can save money and sometimes holds up better, but only if the dimensions match. We’re an independent Glendale service provider and not affiliated with Oldcastle; we don’t claim a parts warehouse or parts on a truck, so we source the right piece per job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Oldcastle Bathroom Remodeling Is Failing

  • Caulk lines opening at the surround seams. The caulk has failed and water is getting behind the panel. Left alone, that moisture reaches the substrate and the damage spreads past the seam.
  • A hollow sound when you tap the floor tile. The tile has debonded from the thinset, usually from a small leak or movement in the subfloor. Loose tile is a symptom; the water source underneath is the actual problem.
  • Hairline cracks in a cultured marble vanity top. Oldcastle cultured marble cracks at stress points near the sink cutout or the front edge. A crack lets water into the core, and it won’t seal permanently with filler.
  • Yellow or brown staining around the shower drain. Usually a failed drain seal or a slow leak in the pan. In Glendale’s older housing stock, we see this most in baths that were tiled decades ago and never re-sealed.
  • Fiberglass flexing or a soft spot underfoot in the tub or shower. The acrylic or fiberglass has lost support, or the subfloor beneath it has softened from a long-running leak. Flexing gets worse, not better.

Our crews have up to 28 years of experience reading these symptoms, and we’ll tell you plainly whether you’re looking at a repair or a rebuild.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Glendale, a full bathroom remodel runs $9,000 – $28,000. What drives the range: whether we’re moving plumbing, how much tile area is involved, and whether the substrate underneath is sound or needs repair once we open it up.

Scope Installed range (Glendale)
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

Every estimate is a written line-item quote. If we find rot or a failed pan once the old surround comes off, you get a written change order before anyone touches the scope. Permits are pulled and inspections signed on every eligible job, and the work is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely do some of this yourself. Re-caulk a surround seam, verify a part number off the old panel, measure your cabinet opening, and check under the sink for active leaks – all fine to handle on your own.

Where DIY goes wrong on bathroom work is underneath. Pulling a surround or a tub without confirming the pan and substrate are sound, or setting tile over a soft subfloor, means the new piece fails faster than the old one did. Wet substrate and mold behind a wall aren’t jobs to guess at. If you’re seeing soft spots, spreading cracks, or water staining, that’s the point to stop and call. Reach us at (844) 560-4526 for a free estimate – a live person answers, day or night.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch