Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Fence Installation: The Glendale Owner’s Guide
We install Oldcastle fence systems across Glendale, and a full vinyl or composite run typically lands between $3,500 and $9,000 installed, depending on linear footage, gate count, and how much old fencing has to come out first. Most Glendale owners don’t go looking for fence problems on purpose. They find them after a wind event knocks a panel loose, after a post starts leaning toward the neighbor’s yard, or when they lean on a gate and feel it give a half inch it never gave before. That wobble or that first popped rail is usually the moment the call comes in.
Key Takeaways
- Oldcastle vinyl and composite fence installs in Glendale run $3,500 to $9,000 for most residential runs.
- Southern California sun is hard on vinyl – the part that fails first is almost always the post or the rail bracket, not the panel itself.
- We pull permits where Glendale requires them and get inspections signed before we call a job done.
- Every price change comes to you in writing before any work moves forward.
Which Oldcastle Models This Applies To
Oldcastle makes fence in several lines, and the part you need depends entirely on which one is in your yard. The common residential products are their vinyl privacy lines, their picket and ranch rail lines, and composite panels. The way to identify what you have is straightforward: pull the manufacturer sticker off the inside of a post or the underside of a top rail, and measure your post thickness and panel width. Oldcastle standard posts generally run 5 inches square or 4 inches square, and panels come in 6-foot or 8-foot nominal widths. A 5-inch post bracket will not fit a 4-inch post, and mixing the two is one of the most common mistakes we see on DIY repairs around Glendale.
On the OEM versus aftermarket question: for Oldcastle specifically, we lean OEM on posts, caps, and rail brackets because the profiles are proprietary and an aftermarket bracket that “looks close” will crack at the screw hole within a season or two. For pickets and infill panels, a quality aftermarket match is fine when the color and thickness are verified against your existing run. We’re an independent contractor and not affiliated with Oldcastle. That means we source what actually fits your model, not whatever a distributor is pushing that month. We also install KraftMaid, Cambria, and Silestone on the interior side of the business, so brand-matching isn’t new to us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Fence Installation Is Failing
You’ll know. The signs are usually visible before anything actually falls over. Here’s what we see most in Glendale:
- Posts leaning after wind or irrigation: a post that sags inward usually means the concrete footing was undersized or the soil around it has softened from a sprinkler line. Oldcastle 5-inch posts need a footing that’s deeper than the frost line and wide enough to resist lateral load – most failed footings we dig out were set too shallow.
- Rails pulling out of the post bracket: this is the classic failure. The bracket is cast pot metal or plastic, and UV exposure across years of Glendale summers makes it brittle. Once the rail pops, the panel sags.
- Yellowing or chalky panel surface: vinyl fence panels break down from the sun, not from rain. A panel that’s gone chalky on one side is on its way to cracking at the picket edge.
- Gate sagging and dragging: hinges back out of the post over time, and the gate drops. Left alone, the gate arm will shear.
- Cracked post caps and exposed fasteners: a missing or cracked cap lets water into the post interior, and freeze-thaw isn’t the issue in Glendale – it’s trapped moisture and rusting internal screws that eventually split the post.
Replacement Cost & What’s Included
For a Glendale residential fence install or replacement, the installed range is $3,500 to $9,000. What drives the number is linear footage, gate count and style, whether the old fence has to be demoed and hauled, and whether posts need deeper footings because of soil conditions. A short gate-side repair might be a few hundred dollars; a full run replacement with two gates sits near the top of the range. Our written estimate breaks parts and labor separately so you can see exactly what you’re paying for. Where Glendale requires a permit for the fence height or setback you want, we pull it and get the inspection signed. The work is covered by our 90-Day Done Right Promise – if something we installed isn’t right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: measure your post and panel sizes, look for the manufacturer sticker, and confirm which Oldcastle line you have. If a post cap is missing or a gate hinge is loose, snugging those is fine. Where DIY goes wrong on fence is the footing. Digging out an old post and re-setting it in concrete sounds simple until you guess the depth and width wrong, and a leaning fence in Glendale winds is what you get six months later. Working around buried irrigation, gas stubs, or utility lines is another risk that isn’t worth guessing on. If you’re not sure what’s failing, call (844) 560-4526 and we’ll tell you straight.
FAQs
A properly installed Oldcastle vinyl fence typically holds up 20 to 30 years in Southern California, with the caveat that UV exposure is the biggest wear factor and panels facing full afternoon sun will show chalkiness sooner. The fence will outlast the footings if the footings weren’t set right. Call (844) 560-4526 if your fence is leaning.
Yes, in many cases a failed panel, post, or gate can be repaired without replacing the full run, and that’s often the right call when the surrounding fence is still solid. We’ll tell you honestly if repair makes sense or if you’re throwing money at a fence that’s near end of life. Call (844) 560-4526 for a free estimate.
A single-panel or gate repair is usually a half-day job; a full run replacement of 100 to 150 feet typically takes two to three days depending on demo and footing work. We give you the schedule in writing before we start. Call (844) 560-4526 to get on the schedule.
We identify your exact Oldcastle model from the sticker and measurements, then source OEM parts through authorized distribution. We’re an independent contractor and not affiliated with Oldcastle, which means we’re not locked into one supplier and can find the part that actually fits your fence. Call (844) 560-4526 and we’ll get it moving.
Schedule Your Free Estimate
If your Oldcastle fence is leaning, popping rails, or just past its prime, call (844) 560-4526 for a free estimate in Glendale. A live person answers around the clock – not a voicemail box. We’ll come out, look at the actual failure, and give you a written estimate with parts and labor broken out. No surprise invoices at the end. Our technicians have up to 28 years of experience, and every eligible job in Glendale gets permits pulled and inspections signed.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.