A Barrett company - serving Glendale, CA

Quikrete Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Kitchen Remodeling: The Glendale Owner’s Guide

This page covers concrete and masonry work inside a kitchen remodel in Glendale: patching floors, leveling a slab before cabinets go down, repairing a worn hearth or a damaged mud-set base. We handle that work, and a kitchen remodel in Glendale typically runs $14,000 to $45,000 all-in, depending on cabinet line, countertop material, and how much concrete or masonry repair the floor turns up. One thing up front: Barrett & Sons Construction is an independent remodeling company, not affiliated with Quikrete. We buy and install Quikrete products the same way you would, and we’ve pulled enough failed floors apart in Glendale to know where these products hold and where they don’t.

Call (844) 560-4526

Most owners don’t go looking for concrete work. They find it. A cabinet installer sets a level on the old floor and the bubble won’t settle. A tile pops loose two winters after a remodel because the substrate under it was never sound. Or a homeowner pulls up old vinyl in a 1950s Glendale bungalow and finds cracked, uneven slab underneath where the new island was supposed to go.

Which Quikrete Products This Applies To

We’re talking about a few specific products that come up in kitchens: Quikrete Concrete Mix (the 80 lb. bag most homeowners recognize) for patching and small pours, Quikrete Sand/Topping Mix for thin leveling coats, Quikrete Vinyl Concrete Patcher for feathering out cracks and spalls, and Quikrete Anchoring Cement for setting anchor bolts and post bases. Each one has a different job and a different depth limit, and using the wrong one is where most homeowner repairs go wrong. Topping mix, for example, isn’t meant to be built up thick; pour it deep and it shrinks and cracks.

The label on the bag is your compatibility sheet. Check the product name, the yield in cubic feet, and the minimum and maximum application depth printed on the back. That depth range is the number that matters most. If your floor needs 2 inches of build-up, an 80 lb. bag of standard mix will do it; a bag of patcher won’t. Measure before you buy, and measure twice.

On the OEM-versus-aftermarket question: there isn’t really one here. Quikrete is a commodity product sold at every hardware store in Glendale, and the bag you buy at the counter is the same material we’d buy. The difference between a repair that lasts and one that fails isn’t the brand. It’s surface prep, mixing ratio, curing time, and whether anyone checked for moisture under the slab first. Skip that last step and even a perfect pour will lift.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Kitchen Floor or Masonry Work Is Failing

  • Cracks spreading from a corner or doorway. Usually slab movement or a patch that was mixed too wet and shrank as it cured, pulling away from the surrounding concrete.
  • A hollow sound when you tap the floor. That’s a sign the patch or topping coat has debonded. If tile sits on top of it, the tile is living on borrowed time.
  • White powder or crust along a baseboard or floor seam. Efflorescence, which means moisture is moving through the concrete. It’s common in older Glendale homes where a slab has no vapor barrier under it.
  • Cabinet bases sitting unlevel, or doors that won’t line up. A floor that was patched without checking flatness will telegraph right up through the cabinets. This is the one owners most often mistake for a cabinet problem.
  • Cracked or crumbling hearth, step, or built-in surround. Masonry that was never sealed or that took too much heat cycling. In Glendale, a kitchen hearth facing south or west gets a lot of afternoon sun, and that temperature swing does real damage over time.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Quikrete Kitchen Remodeling Cost in Glendale & What’s Included

A full kitchen remodel in Glendale runs $14,000 to $45,000. Concrete and masonry repair is a line item inside that, not a separate project, and what it costs depends on square footage, depth of the pour, and whether old tile or vinyl has to come up first.

  • Small kitchen remodel: $9,000 to $20,000
  • Cabinet installation: $4,000 to $13,000
  • Countertop installation: $2,000 to $6,500
  • Backsplash installation: $800 to $2,500
  • Kitchen island installation: $3,000 to $10,000

Every price we quote is written down line by line, with materials and labor spelled out. If we open a floor and find a slab problem nobody could see from above, that price change arrives as a written change order before anyone touches a nail. The work carries our 90-Day Done Right Promise on every construction and remodeling job. Call (844) 560-4526 for a free estimate, and we’ll look at your floor before we quote a cabinet.

DIY or Call Us?

Some of this you can check yourself. Tapping a floor for hollow spots, looking for cracks wider than a credit card, and checking for white mineral staining are all things a homeowner can do in an afternoon. If it’s just a hairline crack in a hidden corner, a tube of patcher and an honest weekend might be enough, and we’ll tell you that.

Where it goes sideways is the structural end. A slab that’s moving, a floor that needs a real leveling pour, or masonry around a heat source all need a trained eye. Doing it wrong doesn’t just look bad; a bad patch under new cabinets voids the flatness tolerance those cabinets were built to, and you’ll find out six months later when the doors stop closing. We’d rather look at it before you spend the money. Call (844) 560-4526 and get a second opinion before you start pulling up anything.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch