Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Glendale Homeowners
Fence work in Glendale has its own set of headaches. Hillside lots in Chevy Chase and Adams Hill sit on slopes that push water down fast during winter storms, and a fence set with shallow footings will lean within two seasons. In south Glendale near the 134, older block walls and wood fences from the 1960s have hit the end of their life. Our crew members have up to 28 years of experience building fences on these lots, with premium brands you can look up by name. Fence installation in Glendale typically runs $3,500 to $9,000, and we quote every job with a free written estimate. Call (844) 560-4526 and a live person answers.
What Our Fence Installation Service Includes
Wood Fence
A wood fence is the standard for privacy in most Glendale backyards – cedar, redwood, or pressure-treated pine set in concrete footings. You need it when you want full privacy, a natural look, and a fence you can repair board by board over time. We set posts below the frost-free depth Glendale requires and brace every gate so it swings without sagging. On slope lots near Glenoaks, we step the panels rather than racking them, which keeps each section level and lets water move underneath instead of pooling at the base.

Chain Link Fence
Chain link is the right call when you need a boundary, security, or a dog run without paying for wood or vinyl. It’s common on Glendale properties that border alleys or vacant lots, and it’s often specified on commercial and rental properties. We use galvanized or vinyl-coated mesh with tension bands set on every terminal post, so it stays tight instead of bowing. If you’re fencing a rental or a corner lot on a busy street like Glendale Boulevard, chain link holds up where privacy panels would take a beating.

Vinyl Fence
Vinyl fencing gives you a wood look without the repainting, and it holds up well against the dry summer sun that bleaches wood in Glendale. It’s a good fit for homeowners who are tired of scraping and sealing every few years, especially on fences facing south or west. We use reinforced rails on every panel and set posts in concrete, because the biggest failure we see on vinyl is a cheap post spacer instead of proper footings. Vinyl fence installation in Glendale runs $3,500 to $9,000 depending on height and gate count.

Aluminum Fence
Aluminum fencing is the traditional choice for pool barriers and front-yard enclosures in Glendale, and it meets the state pool safety code when built to the right height and spacing. It holds paint for years and doesn’t rust, which matters on lots near the hills where marine air and summer heat both work on metal. We set aluminum panels plumb with self-closing gate hardware on pool enclosures so the gate actually latches. Aluminum fence installation in Glendale runs $4,000 to $10,000 depending on linear footage, finish, and custom gates.
Iron Fence
Wrought iron fencing suits Glendale homes with older architectural character, especially in the Rancho and Brockmont areas where the streetscape calls for an ornamental look. It’s heavier and longer lasting than aluminum, and when it’s welded and finished correctly, it lasts decades. We weld every joint and prime and topcoat the metal, since a poorly painted iron fence will flash rust in a single wet winter. Repair and re-set work on existing iron is common on these blocks, and we handle both new installation and restoration.
Fence Repair
Not every fence needs to come down. Leaning posts, rotted bottom rails, broken gates, and split boards can usually be repaired for a fraction of the cost of replacement. The key is figuring out whether the fence failed at the post or the panel – a post that’s dry-rotted below grade means new footings, while a rotted rail is a simpler fix. We inspect the post footings first, because in Glendale, wind damage and dry rot are the two most common causes we see. If repair costs more than half the price of new, we’ll tell you that plainly and let you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Our crew members work with premium materials across every trade, and that depth shows up in fence work too. We’ve installed fencing on homes where the cabinetry was Wellborn or the kitchen island top was Cambria, and those homeowners expect the same level of finish outside. That habit carries over: a hedge-topped aluminum gate finished to match the house trim, or a vinyl privacy panel squared up to the same line as the pool house.
We also work with Silestone and Caesarstone countertops on outdoor kitchen and bar builds where a fence anchors the space, so we know how a fence line has to sit relative to a patio edge or a hardscape. Whether you want a fence matched to existing hardscape in Glendale or a specific look for a commercial property, we spec the material with you up front, in writing. Every brand we install gets named on the estimate, so you can look up what you’re paying for instead of trusting a label off a van.
Signs You Need Fence Installation Right Now
- Posts that lean after rain. If a post leans after a wet winter in Glendale, the footing has likely failed. Left alone, the whole panel line will sag and the gate will stop latching within a season.
- Boards that crumble or split at the bottom rail. Dry rot climbs fast in our climate, and boards soft at the bottom mean water is sitting at the base. This is the most common failure we find on older Glendale fences, and it’s often cheaper to replace the fence line than to keep patching it.
- Gates that drag or won’t close. A sagging gate usually means the hinge post has moved or the frame has swelled. Beyond the annoyance, an unlatched gate on a pool property can quickly become a safety and code issue.
- Rust or peeling paint on metal fencing. If iron or aluminum starts spotting rust through the finish, the paint system has broken down. It spreads faster than most people expect, especially on fences exposed to the marine layer.
- Neighbors or the city raising a property line question. If a fence sits off the property line, or a neighbor disputes where the boundary runs, it’s worth sorting out before you build. In our experience it’s cheaper to resolve a boundary question than to move a completed fence.
Our Fence Installation Process – Step by Step
- 1
On-site walk and boundary check. We walk the fence line with you, check the property pins or look up the recorded plat, and confirm exactly where the fence needs to go. We’ll also note slope, drainage, and any utility lines before anyone picks up a shovel.
- 2
Written scope and line-item estimate. You get an estimate that breaks out materials, footage, gate count, and permits. Any allowance, any finish upgrade, every price change is put in writing before work starts, because an allowance that isn’t on paper is a surprise waiting for a date.
- 3
Permits and inspection scheduling. Where Glendale requires a fence permit, we pull it and schedule the inspection. The permit inspector works for you, not for us – that’s why we like him.
- 4
Setting posts and building panels. We set posts in concrete at proper depth for the site, using a string line and a level on every run. Panels go up plumb and square, gates get braced and hung so they swing true, and we clean the site daily.
- 5
Final walkthrough and 90-Day Done Right Promise. We walk the finished fence with you, check every gate and panel, and hand over your written warranty. The 90-Day Done Right Promise is on every contract – if something’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Glendale?
A typical wood privacy fence in Glendale runs $3,500 to $9,000 depending on linear footage, height, and gate count. Vinyl fence installation lands in that same $3,500 to $9,000 range, aluminum fencing runs $4,000 to $10,000, and iron or ornamental work sits at the higher end of that band. Small repairs – a replaced gate post, a couple of new panels – usually come in well under the full-install range, and we quote them separately.
Several things move the price: footage, fence height, slope where a hillside lot needs stepped panels or extra bracing, gate count and hardware, and whether a permit is required. To avoid overpaying, get a written, line-item estimate that names the material brand and shows linear footage and gate count – not a single lump sum over the phone. Our free estimate includes a walk of the property, a written scope, and an exact price with no surprises after the first nail. We pull permits and sign off on inspections on every eligible job.
The published standing offers apply here too: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. Every price change is a written change order before work happens, so the number you sign is the number you pay.
Fence Installation Near Glendale – Our Service Area
We serve Glendale and the surrounding communities, including Burbank, West Hollywood, Beverly Hills, San Fernando, and the Los Angeles neighborhoods of View Park-Windsor Hills, Culver City, Inglewood, Westmont, Lennox, and West Athens. Typical drive times across our service area are short, and we schedule estimates within days of your call. For nearby work, see our Fence Installation in Burbank page, and for homes further west, Fence Installation in West Hollywood. Call (844) 560-4526 and a live person answers.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Glendale
Fence installation means building a new fence from the ground up – setting posts in concrete, hanging panels, and mounting gates on a property line. It includes choosing materials (wood, chain link, vinyl, aluminum, or iron) and building to local code. The difference between a good fence and a bad one is almost always the footings and bracing, not the panel material. Call (844) 560-4526 for a free estimate on your Glendale property.
A typical residential fence in Glendale takes one to three days for a standard backyard run, depending on footage and gate count. Larger properties or hillside lots that need stepped panels can take longer. Permit timing, if required, adds to the schedule before work begins. Call (844) 560-4526 and we’ll give you a realistic timeline with your written estimate.
Fence installation in Glendale typically runs $3,500 to $9,000, with vinyl and wood in that range and aluminum up to $10,000. The final number depends on footage, height, materials, and gate count. Our free estimate is a written, line-item quote with material brands named. Call (844) 560-4526 to schedule a free estimate.
Yes – we install wood, chain link, vinyl, aluminum, and iron fencing, and we name the material brand on every estimate so you know exactly what’s going in the ground. We spec finishes and hardware for our climate, especially on south- and west-facing fences where the sun takes a toll. Call (844) 560-4526 and we’ll walk you through the options for your property.
Yes. If a storm knocked down a fence or a gate is hanging open on a pool property, call (844) 560-4526 and a live person answers around the clock. We schedule the fastest possible repair visit and give you a written quote before work. A sudden hole in a privacy fence or a broken pool barrier shouldn’t wait a week.
Every completed fence job is backed by our written 90-Day Done Right Promise. If something isn’t done right, one call brings us back to fix it. The promise is written on every contract, not buried in fine print. Call (844) 560-4526 to ask about warranty specifics for your job.
Clear the fence line of furniture, plants, and anything that blocks access, and make sure we can reach the property line. If pets or gate access need accommodating, tell us in advance so we can plan. Everything else – digging, footings, cleanup – is on us. Call (844) 560-4526 with any questions before we arrive.
Schedule Your Fence Installation Service in Glendale Today
Call (844) 560-4526 for a free, no-obligation estimate on your fence installation in Glendale. A live person answers around the clock, and we’ll walk your property, quote every line item in writing, and pull permits where required. Every price change is a written change order before work begins, and every job is backed by the 90-Day Done Right Promise. Start at our home page or call today – we’ll take it from there. For a side-by-side look, see our Fence Installation in Glendale overview, and ask about our fence repair services or Driveway & Pavers for a matching hardscape.
Written by the team at Barrett & Sons Construction.