A Barrett company - serving Glendale, CA

Quikrete Roofing in Glendale, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Roofing: The Glendale Owner’s Guide

Quikrete roofing products in Glendale are repair and patch materials, not a full roofing system, so “replacement” here usually means replacing failed Quikrete patch, resurfacing or coating work rather than a whole roof. Most small Quikrete roof repairs in Glendale run $400 – $1,800 installed, and full roof replacement runs $8,000 – $20,000. We’re an independent contractor and not affiliated with Quikrete, but we work with these products often and can tell you honestly when a patch is the right call and when it’s covering a bigger problem.

Call (844) 560-4526

Owners usually find out the Quikrete went bad the same way: a brown ring on the ceiling after the first real rain, granules or coating flakes in the gutter, or a soft spot on the patio cover that gives a little underfoot. Sometimes it’s a contractor’s old patch on a flat section that peeled up in a single summer, and you can lift the edge with a putty knife.

Which Quikrete Models This Applies To

Quikrete’s roofing side is a handful of product families, and knowing which one you have changes what the repair looks like. The common ones on Glendale homes are the patching cements and sealants (the tub and tube products used on flat and low-slope roofs, flashings and seams), the roof coatings and resurfacing products, and the concrete and mortar mixes that end up under tile and on parapets around flat roofs.

Find the label before you call anyone. The product name and number are printed on the bucket or tube, and a photo of the label plus the date stamp is worth more than a description. If the label is gone, the surface tells you a lot: a thick gray patch on a flat section is almost certainly a patching cement, while a white or silver reflective layer is a coating. Don’t guess at compatibility; a coating over the wrong substrate fails fast in Glendale heat.

On the OEM-versus-aftermarket question, there’s no “OEM” for Quikrete in the appliance sense. The real decision is matching the product family and the substrate: a Quikrete patch that failed on a modified-bitumen surface may need a different patch and a primer, not a bigger blob of the same thing. We’ll tell you which way makes sense for your roof, and we don’t pretend to stock parts or carry them on a truck. We source what the job needs.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Roofing Is Failing

  • Bubbles or blisters in the coating. That’s trapped moisture or a coating applied over a damp or dirty surface, and it means the bond never took. Left alone, the blister opens and water gets under the edge.
  • Peeling or lifting at the edges. The patch is pulling away at the perimeter, usually because the surface wasn’t cleaned or primed first. Once the edge lifts, the whole patch is on borrowed time.
  • Hairline cracks coming back in the same place. The patch is moving with the roof, which means the underlying joint or seam is still active. The repair didn’t address the cause.
  • Granules or coating flakes in the gutter and downspout. The top layer is breaking down, and you’re losing the surface that protects the material underneath.
  • Water staining on the ceiling or sheathing below. This is the one to take seriously: the patch has failed and water is already inside the roof assembly, and the longer it sits, the more of the deck it reaches.

If you’re seeing two or more of these, don’t add another layer on top. The next coat just buries the problem.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Glendale, a Quikrete roof repair runs $400 – $1,800 installed, and a full roof replacement runs $8,000 – $20,000. Tile roof repair on the same homes is $600 – $2,500, and metal roof work runs $15,000 – $40,000 when the job calls for it. What moves the number: how much square footage is involved, whether the substrate is flat or low-slope, how much of the old material has to come off, whether there’s rot in the deck underneath, and how accessible the roof is.

We keep parts and labor separate on the quote so you can see what you’re paying for. Our technicians have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and every scope or price change reaches you as a written change order before work starts. The finished work is backed by our written 90-Day Done Right Promise, and if something’s not right, one call brings Tom back.

DIY or Call Us?

You can safely check a few things yourself. Look at the label on the product, take photos of the failed area, check the ceiling below for staining, and clear leaves out of the gutters so you can see what’s actually happening. That much is fair game and it helps us a lot when you call.

Where it goes wrong is on the roof itself. Roof work means height, and in Glendale that means steep pitches, tile that cracks if you step wrong, and summer surface temperatures that will burn you through a shoe. A homeowner up there without fall protection is taking a real risk, and a patch applied wrong doesn’t fail quietly, it fails into your ceiling. We’d rather you stay on the ground and let us handle it. Call us at (844) 560-4526 and we’ll get you a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch