Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Home Additions & ADU: The Glendale Owner’s Guide
If you own a Cover home addition or ADU in Glendale and something has gone wrong with it, we install and repair Cover-compatible additions and ADUs, and a typical whole-project price in Glendale runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. Cover makes prefabricated, panelized structures that ship as a kit and get assembled on your lot, so failures rarely look like a broken hinge or a snapped board. They show up as water where water shouldn’t be, a panel that has moved off its line, or a joint that opened up after a hot Glendale summer. Owners usually find out the hard way: a stain spreading across the ceiling in September, a door that won’t latch because the frame has shifted, or a tarp going up after the first real rain of the season.
Which Cover Models This Applies To
Cover has shipped its backyard structures in more than one panel system and roof configuration, and the part that fits one generation doesn’t fit the next. The fastest way to identify what you have is a photo of the manufacturer label on the structure itself, usually fastened inside a panel edge or near the electrical stub-out, plus the overall footprint measured corner to corner. When a label is missing, a photo of the roof profile, the wall panel seam pattern, and the base connection tells us which series you’re working with.
Then comes the real decision: OEM versus a quality equivalent. For the structural panels, roof membrane, connectors, and the weather-sealing components, we go OEM whenever the part is still in production, because Cover’s tolerances on panel geometry are tight and a substitute that’s a fraction off will telegraph through the finished wall. For fasteners, flashing, sealants, and trim, a quality equivalent is often the smarter buy, and we’ll tell you which is which instead of marking up an OEM part you don’t need. Glendale sits in a hot, dry, fire-conscious climate zone with Santa Ana wind events, and that shapes what we specify for UV-rated membrane and ember-resistant detailing. Barrett & Sons Construction Glendale is an independent service provider and not affiliated with Cover.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cover Home Additions & ADU Is Failing
Glendale’s dry summers and sudden winter rains stress prefab structures differently than they stress a stick-built house. Here’s what we actually see.
- Water staining on interior panels or ceilings. Usually a failed roof membrane seam or a clogged roof drainage path, often after the first real rain following a dry summer. In Glendale, we regularly see this open up in October and November, not in the middle of winter.
- Doors or windows that stopped latching. The panel frame has shifted, often from soil movement or a base connection that loosened. Left alone, the gap lets water and wind in.
- Visible gaps at panel seams. The sealing tape or gasket has aged out under UV. It’s a cheap fix early and a rotten wall if it’s ignored for a full season.
- Soft spots or discoloration at the base. Moisture is wicking up from the slab or foundation connection. This needs to be looked at before it reaches the structural panel.
- Mold, mustiness, or fogged interior air. A sign the structure isn’t drying out, usually tied to a ventilation or roof detail failure. It’s worth a look before you spend any more on the inside.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing for a Cover structure in Glendale depends on the scope, not just the part. Here’s how it breaks down.
| Scope | Glendale Range |
|---|---|
| Home Addition (full project) | $45,000 – $130,000 |
| ADU Construction (full project) | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What drives the range: the number of panels or modules, whether the foundation needs rework, whether you’re replacing a roof membrane or re-sealing the whole envelope, electrical and plumbing connections, and whether the structure is permitted. We pull permits and get inspections signed on every eligible job, which adds cost but keeps the structure legal and insurable. Every part and every labor line is written on the estimate, and a change order arrives in writing before anything moves. The work is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely take photos of the label, measure the footprint, and check for obvious water staining or a clogged roof drain. What gets owners into trouble is attempting the panel or membrane repair yourself. Cover’s structures rely on precise panel geometry and a continuous weather seal, and a repaired seam that looks fine can fail the first night it rains. There’s also the structural side: if a base connection has loosened, working on it without understanding the load path is a real risk. The honest move is to have it looked at. Our crew members have up to 28 years of experience and carry the Barrett & Sons name on every visit. If a repair is the right answer, we’ll say so instead of pushing a replacement. Call (844) 560-4526 and a live person picks up, any hour, any day.
FAQs
How long does a Cover addition or ADU actually last in Glendale? A Cover structure with proper maintenance typically holds up 25 to 30 years, but roof membrane seams and UV-exposed sealants are the parts that age out first in Glendale’s sun. Inspecting those once a year is what gets you to that lifespan.
Can the part be repaired instead of replaced? Yes, often. A failed seam, a gasket, or flashing is usually a repair, not a replacement. Panel or frame damage from a base shift may call for a partial replacement. We’ll tell you which one after we look.
How long does the swap take? A weather-seal or flashing repair is often a day. A roof membrane replacement runs two to four days depending on the panel count. A structural panel or base connection repair depends on whether the foundation needs work, and we’ll give you a written timeline before we start.
How do you source the part? We work from the manufacturer label, the structure’s series, and measured footprint, and we source OEM where the geometry matters and quality equivalents where it doesn’t. Every part is named on your estimate, alongside brands we also service like KraftMaid, Cambria, and Silestone. Call (844) 560-4526 for a free estimate. A live person answers 24 hours a day, and there’s no trip charge inside the county.
Whether your Cover structure needs a small seal or a larger fix, the first step is a free estimate and a written scope. Call Barrett & Sons Construction Glendale at (844) 560-4526 to schedule yours. A live person answers around the clock. Ask about the Free Second Opinion on Any Written Estimate, the $40 Off Any Repair Over $200, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.