Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Glendale Owner’s Guide
A Dvele kitchen remodel in Glendale typically runs $14,000 to $45,000 installed, depending on whether you’re refacing cabinets and counters or opening walls, moving a sink line, and building out an island. We match Dvele-compatible cabinet boxes, panels, and trim to your specific model line before anything gets ordered, and we pull the city permits that go with the job. Most Glendale projects get a written scope and a scheduled start within two to four weeks of the first walkthrough.
The trouble usually announces itself the same way. A Dvele owner in Adams Hill notices a cabinet door that won’t sit flush anymore, or a lower drawer that drags on the frame after a hot September. Someone in Rancho San Rafael spots bubbling laminate along a counter edge near the dishwasher. That’s when the phone comes out, and the first question is always the same: can this Dvele kitchen go back together clean, or does the whole run need to come out?
Which Dvele Models This Applies To
Dvele builds modular and panelized homes in defined series, and the kitchen cabinetry, counter substrate, and finish trim are tied to that series. The model plate is the place to start. It sits in the utility area or on the electrical panel cover, and it lists the model designation and build year. Pull the exact string off that plate, not from memory, because two Dvele plans that look identical from the living room can spec different cabinet depths and different backsplash heights.
Measurements come next. Cabinet box width, reveal at the door edge, counter thickness, and the distance from the counter deck to the upper cabinet bottom. Dvele kitchen runs frequently land in standard cabinet dimensions, which is good news, but the finish and edge profile are where aftermarket parts stop matching. An OEM Dvele panel keeps the factory color and mill the rest of the room already has. A quality aftermarket cabinet in a similar finish costs less and installs faster, and in a home where the kitchen is being taken down to the studs anyway, that’s often the smarter buy. We’ll show you both paths in writing, with the price for each, before you decide.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
- Doors that won’t stay aligned. Concealed hinges on panelized cabinets loosen as the particleboard screw holes wear. Once the screw bites into nothing, adjustment won’t hold and the door needs a new hinge or a relocated plate.
- Drawers that drag or stick. Undermount slides collect crumbs and lose their grease over time. In Glendale’s dry summer heat, that grease dries out faster, and a drawer that stuck once will keep sticking.
- Bubbling or lifting counter edges. Moisture at the sink or dishwasher seam gets under the laminate or the substrate. By the time you can see it, the deck underneath is usually soft.
- Caulk lines that keep cracking at the backsplash. The joint moves with the cabinet run and the seasonal swing. Fresh caulk over a loose cabinet is a patch, not a fix.
- A soft or swollen cabinet floor under the sink. Slow leaks and condensation rot the base panel from underneath. That’s a base cabinet replacement, not a cleaning.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Glendale homeowners are paying for Dvele-compatible kitchen work, installed, with permits and haul-away included:
- Full kitchen remodel: $14,000 – $45,000
- Small kitchen remodel: $9,000 – $20,000
- Cabinet installation: $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
- Backsplash installation: $800 – $2,500
What drives the number up is scope, not brand: moving plumbing or gas, opening a load-bearing wall, or adding an island with a dedicated circuit. What keeps it down is reusing the existing footprint. Every allowance, every scope item, and every price change is written on the change order before the work happens, so the number you sign is the number you pay. The finished job carries the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely pull the model plate, measure your cabinet runs, photograph the hinge and slide labels, and check the caulk line for soft spots. That’s it. The work itself is where people get hurt or get in over their head. Cabinet runs are heavy, they’re often attached to the wall structure, and a base cabinet that comes loose while you’re working under it is a real hazard. Moving a gas line for a new range is not a homeowner task in Glendale, full stop, and any electrical work past swapping a plug needs a licensed electrician and a permit.
What we do is simple. We come out, confirm what your Dvele kitchen actually needs, hand you a written range, and pull the permits so the city inspector signs off on the parts that matter. If you’ve already got a bid from someone else, we’ll give you a free second opinion on it. Call (844) 560-4526 and we’ll get you on the schedule.
FAQs
Ten to fifteen years is a fair expectation for the factory cabinetry, and hinges and slides usually fail first, often around year seven to ten. Glendale’s dry summers dry out slide grease faster than a coastal climate would, so drawer hardware tends to go before the boxes do. Call (844) 560-4526 for an exact quote on replacement.
Often, yes. A failed hinge, a worn slide, or a single damaged door can usually be swapped without touching the rest of the run, and that’s the cheapest path when the box itself is sound. When the base panel is swollen or the counter substrate is soft, replacement is the honest answer. We’ll tell you which one it is in writing.
A hinge or slide repair is a same-visit job. A single cabinet or counter section swap is typically one to two days. A full kitchen remodel is two to four weeks on site, longer if walls come down or plumbing moves. We give you a written schedule before the crew arrives.
We start from the model plate and the measurements you send us, then match to the factory spec or to a verified aftermarket equivalent, and we put both options and prices in front of you. We don’t claim to carry Dvele parts in stock or on a truck. What we do is order the right part, the first time, with the paperwork to prove it.
If your Dvele kitchen has a hinge that won’t hold, a counter edge lifting, or you’re ready to price a full remodel, call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. We’re an independent contractor and not affiliated with Dvele, but we know these homes and we’ll give you the straight number in writing.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.