Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Home Additions & ADU: The Glendale Owner’s Guide
We build and install Mighty Buildings-compatible home additions and ADUs in Glendale, with completed projects typically running $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. The price depends on square footage, foundation work, utility runs, and how the panelized sections tie into your existing structure. We’re an independent contractor and not affiliated with Mighty Buildings, so we work from the stamped plans and the factory components themselves rather than a proprietary service agreement.
Owners usually call us after something has already gone sideways. A panel joint on that Mighty Buildings addition at the back of a Glendale bungalow starts showing a hairline crack after the first wet winter. A door in the ADU sticks every June. An owner who bought a Glendale house with an unpermitted Mighty Buildings addition discovers the electrical panel was never signed off. That’s typically how the phone call starts.
Key Takeaways
- Installed addition pricing in Glendale runs $45,000 – $130,000; a full ADU runs $90,000 – $220,000.
- Mighty Buildings panelized systems have specific tolerances that don’t match conventional stick-framing repairs.
- Every eligible job gets permits pulled and inspections signed, in writing, before we touch a seam.
- All pricing and scope arrive as written change orders on signed contracts, backed by the 90-Day Done Right Promise.
Which Mighty Buildings Models This Applies To
Mighty Buildings built its reputation on factory-printed and panelized accessory dwelling units, and the company has offered several product lines over the years: the Mighty House and Mighty Homes product families, the Mighty Mod line, and studio, one-bedroom, and two-bedroom ADU configurations built from its composite panel system. Different product generations use different panel thicknesses, different foundation connection details, and different window and door schedules. That matters more than most Glendale owners expect.
Before we order anything, we confirm four things from your existing structure:
- Model and serial documentation. Title plates, plan-set cover sheets, or manufacturer labels on panel edges tell us the product generation. If those are missing, the plan set filed with the City of Glendale building department is the fallback.
- Panel and frame dimensions. The factory composite panels aren’t standard lumber. A replacement section that’s off by an eighth of an inch won’t seat the way the original did, and the joint will telegraph through the finish.
- Connection hardware schedule. Anchor bolts, straps, and panel-to-panel fasteners are specified per assembly. The wrong anchor for the seismic zone is a permit denial waiting to happen.
- Utility stub locations. Slug and penetration locations shift between production runs.
The OEM-versus-aftermarket call is different for these systems than for a water heater. Structural connection parts should match the manufacturer’s spec or an engineer-approved equivalent. Windows, doors, cladding trim, and finishes can often come from quality aftermarket suppliers and cost meaningfully less. We tell you which category each part falls into before you commit. For cabinets and stone we also work with KraftMaid, Cambria, and Silestone, and those trade decisions get written out just like everything else.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mighty Buildings Home Additions & ADU Is Failing
These are the five things we see most often on Mighty Buildings structures in Glendale, and what each one usually means.
- Hairline cracks along panel seams. Panelized systems move as a unit, and differential settlement at one corner concentrates stress at the seams. Left alone, a hairline crack becomes a water path.
- Doors and windows that stick seasonally. Glendale’s summer heat and dry Santa Ana winds drive wood and composite components to shrink, then swell when the winter rains return. Sticking that changes with the season points to movement in the frame or an anchor backing out.
- Roof ponding or membrane bubbling on flat sections. The membrane on a flat addition roof has a service life, and the San Fernando Valley gets hot enough in July and August to age it faster than the spec sheet guesses. Bubbling means trapped moisture.
- Water staining at floor-to-wall junctions inside the ADU. That’s usually a wall base detail that wasn’t caulked correctly when the structure was set, letting rain wick behind the finish.
- Ground-floor moisture or soft spots. This usually means the foundation vapor barrier or drainage at the perimeter has failed. The foundation connection on a factory panelized unit depends on good drainage, and a Glendale hillside lot with a slope sends water right at it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full home addition in Glendale runs $45,000 – $130,000. A full ADU runs $90,000 – $220,000. A garage conversion sits lower, in the $30,000 – $80,000 range, and is a common middle path for owners who want the space without the full new structure.
| Scope | Installed range |
|---|---|
| Home addition (per project) | $45,000 – $130,000 |
| ADU (per project) | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What drives the number: square footage, foundation type and depth on your lot, how far we have to run utility lines from the main, and whether the structure is detached or attached. Within those ranges, the parts-plus-labor split is written line by line. What you see is what you pay.
Every eligible job gets permits pulled and inspections signed. Any scope change is a written change order issued before work proceeds, and the completed work carries the 90-Day Done Right Promise.
DIY or Call Us?
What you can safely check yourself: take photos of hairline cracks along panel seams, measure door and window gaps with a straight edge, and note where the staining shows after a rain. That information helps us quote accurately.
What we don’t recommend doing yourself: panel connection work, foundation anchoring, and any repair that affects structural or seismic performance. These aren’t parts you swap. They’re assemblies with engineer-specified hardware and permit-required inspection. Panel modifications, in particular, can void manufacturer documentation and the city inspection sign-off. A wrong anchor on a Glendale hillside lot is a genuine safety issue, not just a paperwork hassle. Call (844) 560-4526 and we’ll tell you honestly what’s DIY and what isn’t.
FAQs
The structure itself should last decades if it’s well maintained. What wears first is the roof membrane, the joint sealants, and the exterior finish, all of which take a beating under Glendale’s sun and occasional wind-driven rain. Budget for roof and sealant renewal well before the structure itself is a concern.
Often yes. Seam cracks, joint sealant failures, and localized moisture damage usually respond to targeted repair rather than a full re-panel. Structural connection problems and settlement damage are a different conversation. We’ll tell you which one you’re looking at after we see it.
A localized repair usually takes a few days to a couple of weeks depending on permit review and material lead time. Full demolition-and-rebuild for an addition or ADU runs weeks to months. We put the timeline in the written scope before work starts.
Some parts come from Mighty Buildings or its successor suppliers when available. Others come from quality aftermarket equivalents or engineer-approved substitutes. We don’t claim to stock parts, and we don’t tell you a part is in stock when it isn’t. We confirm availability, put it in the written scope, and hold to it.
Call (844) 560-4526 to schedule your free estimate. A live person answers 24 hours a day, seven days a week. We’re an independent contractor and not affiliated with Mighty Buildings, but we know these structures and we’ll give you a written number you can bank on.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.