A Barrett company - serving Glendale, CA

Boxabl Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boxabl Driveway & Pavers: The Glendale Owner’s Guide

We install Boxabl-compatible driveways and paver aprons in Glendale, and typical installed pricing runs about $7,000 – $18,000 for a paver driveway and $3,500 – $11,000 for a paver patio or unit landing, depending on square footage, base prep, and how much of the lot needs grading. We are an independent service provider and are not affiliated with Boxabl.

Call (844) 560-4526

Owners usually find the problem after a wet Glendale winter or a hot dry stretch, not during a routine inspection. The apron in front of the Boxabl module starts to settle or rock underfoot, a paver edge lifts and trips someone at the door, or water pools right where the unit meets the drive instead of running to the street. Sometimes it’s quieter than that: a hairline crack opens along a mortar joint, grass pushes up between units, or the whole surface shifts a quarter inch after a heavy rain and the front entry door starts rubbing its threshold.

Which Boxabl Models This Applies To

Boxabl’s Casita line is the model most Glendale owners have on their lot, and the driveway and paver work around it is not the same as a conventional slab. The Casita ships folded and unfolds on site, which means the final entry height, door swing, and apron grade are established by the installation crew and the pad they set the unit on. That height is what your driveway has to meet without a step-up that fights the door. If your apron was poured or laid before the unit landed, or by a crew that didn’t measure the finished threshold, it usually shows up as a lip at the entry.

Identifying the right material starts with measuring, not guessing. Note the width of the door opening, the finished apron depth, and the distance from the unit face to your property line. Boxabl does not publish a single universal paver spec for every site, so the correct unit is the one that fits your measured apron and matches the base depth your soil requires. On the OEM-versus-aftermarket question: Boxabl-branded hardscape components exist for the install, but a properly specified aftermarket paver from a name-brand manufacturer (Belgard and Techo-Bloc are the two we install most in Glendale) performs identically when the base is built right. The base is where the money goes, not the label on the paver.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boxabl Driveway & Pavers Is Failing

  • Rocking pavers near the entry. Base compaction failed or the sand layer washed out under winter rain. A paver that moves underfoot is a base problem, not a surface problem, and re-sanding over it just delays the fix.
  • Pooling water at the unit face. The apron slope is flat or tipped toward the Boxabl instead of away from it. Glendale’s rainy season turns that into water against the base of your module, which is the last place you want it.
  • Lifted or heaved edges along the driveway perimeter. Our clay-heavy soil expands when wet and contracts in summer heat, pushing edge restraints up. Missing or shallow edge restraint is almost always behind it.
  • Cracks in a concrete apron or joint separation in pavers. Thin pour, no control joints, or a base that wasn’t compacted in lifts. In Glendale, a driveway poured over unprepared soil will crack within a few seasons.
  • Weeds and grass in the joints. Joint sand has eroded, and once it’s gone the pavers lose interlock and start to spread. It looks cosmetic and isn’t; it’s the early warning before shifting.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the numbers look like in Glendale, installed, including demolition, haul-off, base prep, and materials:

Work Glendale Installed Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio / unit landing $3,500 – $11,000

The range is driven by square footage, how deep the base has to go on your soil, edge restraint and drainage corrections, and whether existing concrete or pavers need breaking out and hauling. Every scope and every allowance arrives in writing before work starts, and any price change comes as a written change order before we touch the job. Our crew members have up to 28 years of experience on hardscape, and the finished work is backed by our written 90-Day Done Right Promise: if it’s not right, one call brings us back.

DIY or Call Us?

You can safely check a few things yourself. Walk the apron and mark where it rocks. Watch where water runs after rain. Look for missing joint sand and lifting edges. Take photos and measure the door opening and apron depth.

What you shouldn’t do yourself is pull up pavers and re-lay them over the existing base, or pour a new apron tight against the Boxabl without addressing grade and drainage. Under-laid paving traps water against your unit, and a too-high apron fights the door and the threshold. That’s the repair that costs more the second time. Base prep is also the part that takes real equipment and compaction in lifts, which isn’t a weekend job.

If you’re not sure whether it’s surface or base, call us at (844) 560-4526 and we’ll tell you straight. Estimates are free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch