A Barrett company - serving Glendale, CA

James Hardie Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

James Hardie Bathroom Remodeling: The Glendale Owner’s Guide

A James Hardie bathroom remodel in Glendale typically runs $9,000 – $28,000 installed, with the spread driven by wet-area square footage, tile and fixture choices, and whether the walls behind the tub get opened up. James Hardie’s fiber cement board is the substrate that makes a bathroom survive steam and daily splash; when it fails, water gets past it and into framing. Most Glendale owners discover the problem slowly: a soft spot near the shower curb, grout that won’t stay put, or a bubble in the paint above the tub that keeps coming back after every patch job.

Call (844) 560-4526

We install James Hardie-compatible bathroom systems across Glendale homes and price them in writing before anything gets torn out. If you’re standing in a bathroom wondering what’s under the tile, call (844) 560-4526 for a free estimate.

Which James Hardie Models This Applies To

James Hardie makes more than one board, and they don’t swap. For bathroom walls and wet areas the relevant products are HardieBacker cement backerboard, most commonly in 1/4-inch for floors and 1/2-inch for walls, sold in 3-by-5-foot and 4-by-8-foot sheets. Hardiebacker 500 is the floor-grade version; using the 1/4-inch wall panel on a floor is a common and expensive mistake because it flexes and hands the tile a deflection it can’t survive.

How you know what you have: pull the cover plate off a shower valve and read the printing on the board, or measure thickness at a cut edge with a tape. James Hardie stamps its name and product line directly on the face. If the backer is gray, chalky, and marked “wonderboard” or nothing at all, it’s not Hardie and the compatibility question changes.

On OEM versus equivalent: James Hardie backerboard is genuinely hard to substitute. The cement formulation, the 1/4-inch and 1/2-inch tolerances, and the screw pattern all matter to the tile warranty. Where homeowners do have a real choice is the waterproofing layer and the setting materials, and that’s where we walk through options in writing rather than letting a crew decide for you on install day. Read the stamp, match the thickness, and don’t let anyone tell you a generic cement board is the same thing. Our crew members have up to 28 years of experience and have opened enough Glendale bathroom walls to know the difference on sight.

Barrett & Sons Construction Glendale is an independent remodeling contractor. We’re not affiliated with James Hardie; we install and repair using their materials and follow their published requirements. We also work with KraftMaid, Cambria, and Silestone when a bathroom remodel includes the vanity side of the job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your James Hardie Bathroom Remodeling Is Failing

James Hardie cement board itself doesn’t rot the way drywall does. What fails is the assembly around it, and it fails in predictable order.

  • Grout that keeps cracking along one line. The line usually traces a seam where two backer sheets meet without the proper mesh tape and thinset bed, so the sheets move independently underfoot or hand pressure.
  • A soft or hollow-sounding spot near the shower curb or tub apron. That’s water getting past a failed seam or a gap at the pan. Backer board hides the damage until the framing behind it has been wet for a season or two.
  • Bubbled or peeling paint on the wall above the tile. Paint failing on drywall above a shower means moisture is traveling through the assembly, not through the paint. Repainting it is treating the symptom.
  • Tile popping loose, or lippage (one tile edge higher than its neighbor). Either the board wasn’t screwed to the required pattern and count, or thinset coverage was thin. Both get worse over time, not better.
  • A mineral or chalky line at the base of the shower wall. In Glendale, where our water runs hard, efflorescence at the base of the backer tells you water is moving through the assembly and drying through the face.

If two or more of those are showing up at once, plan on opening the wall rather than patching over it.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For a full bathroom remodel using James Hardie backerboard and proper waterproofing, Glendale pricing runs $9,000 – $28,000 installed. A small bathroom remodel lands in the $5,000 – $12,000 range, and if you’re only replacing what’s behind an existing shower, a walk-in shower installation runs $4,500 – $12,000 and a shower replacement runs $3,000 – $8,500.

What moves you up or down in that range:

  • Wet-area square footage and whether the tub gets pulled out to reach the framing.
  • Tile selection and pattern, since large-format and herringbone layouts take more setting time.
  • Whether the waterproofing membrane and pan get replaced or reused.
  • Plumbing and electrical changes, which require permits and inspection in Glendale.

Every part of that is itemized in writing before demolition. Our change order rule is simple: if the scope changes, the price change arrives in writing first. Every completed job carries the written 90-Day Done Right Promise, one call brings us back.

DIY or Call Us?

You can safely check a few things yourself. Look for the James Hardie stamp on any exposed board edge, feel for soft spots at the shower curb, press on the tile to find hollow spots, and note where the cracks keep returning. That information helps us quote accurately and saves you a diagnostic visit.

What not to take on yourself: don’t pull out a shower pan or open a wet wall on a hunch. Tearing into a bathroom reveals plumbing and framing you can’t see, and a soaked rim joist is a different job than a re-tiled shower. We’ve opened Glendale walls where a homeowner’s weekend project turned a $4,500 shower replacement into a structural repair. If the wall is wet, stop and let someone look at it.

Call (844) 560-4526 for a free estimate. A live person answers, day or night.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch