A Barrett company - serving Glendale, CA

Walk-In Showers & Shower Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Walk-In Showers & Shower Remodeling in Glendale, CA

A walk-in shower remodel in Glendale typically runs $6,500 to $18,000, depending on tile, glass, and whether the drain and valve get moved. A walk-in shower is a low- or zero-threshold shower you step into without lifting a leg over a curb. We build them for homeowners who are done climbing over a tub wall, for anyone planning to stay in their house through their seventies and eighties, and for people who just want the bathroom to feel bigger than it does now.

Barrett & Sons Construction Glendale has been owner-operated since 1998, and Tom Barrett’s sons run the crews that show up at your door. That matters on a shower job more than most, because a shower is the one place in the house where a small waterproofing mistake stays hidden for two years and then shows up as a soft spot in the hallway ceiling. We pull the permit, we call for the inspection, and we put every price change in writing before the work moves. For the full picture of how a shower fits into a larger project, start with our Bathroom Remodeling page, then call (844) 560-4526 for a free estimate.

Key takeaways:

  • Most Glendale walk-in shower remodels land between $6,500 and $18,000, with curbless and drainage-relocation jobs at the top of that range.
  • Waterproofing and the pan slope are the two things that decide whether a shower lasts twenty years or five.
  • We pull permits and pass inspections on every eligible job. A shower valve and drain change is a permit item in Glendale.
  • Every scope and allowance is in writing, and the 90-Day Done Right Promise is printed on the contract.

When You Need Walk-In Showers & Shower Remodeling

Most people call us after living with one of these for a while. If any of it sounds familiar, it’s probably time.

  • Someone in the house is done stepping over a tub wall. In Glendale, we get a lot of calls from adult children helping a parent stay in the home they’ve owned for thirty years. A low curb or a full curbless entry is usually the single biggest safety change you can make in a bathroom.
  • The tile grout keeps coming back dark or chalky. That’s often a sign the pan isn’t draining the way it should, or the waterproofing behind the tile has given up. Regrouting patches it for a season. It doesn’t fix it.
  • There’s a water stain on the ceiling below. Glendale has a lot of older homes with second-floor bathrooms sitting over a garage or a downstairs hallway. A slow shower leak shows up there first, and by the time you see the stain the damage has been running a while.
  • The shower is a 1960s or 1970s green-and-gold original. Plenty of houses in Glenoaks Canyon, Adams Hill, and the streets around Brand Park still have their original tile. It’s charming until the grab bar pulls out of the wall because there’s nothing solid behind it.
  • You want a bench, a niche, and a hand-held shower head. Small upgrades that make a shower genuinely easier to use, and they’re much cheaper to do during a remodel than to add later.
  • The shower is dark and cramped. A frameless glass panel with a low curb opens up a small Glendale bathroom more than almost anything else you can spend money on.

Our Walk-In Showers & Shower Remodeling Process

Here’s how a shower remodel actually runs from our side, in order.

  1. Walk-through and written scope. We look at the shower, the valve, the drain, and the wall behind the tile if we can get to it. You get a written scope with allowances spelled out. An allowance that isn’t on paper is a surprise waiting for a date.
  2. Permit and inspection. We pull the permit in Glendale and schedule the rough-in inspection before anything gets closed up. The inspector works for you, not for us, and we like it that way.
  3. Demo and framing. Old tile and backing come out. If the studs are soft or the framing isn’t square, we show you and write a change order before we fix it. No price moves without your signature.
  4. Waterproofing and the pan. This is the part nobody sees and the part that matters most. We build a sloped pan, seal it, and use a bonded waterproofing membrane on the walls. No shortcuts here, ever.
  5. Tile, glass, and trim. We set the tile, cut the niches and bench, and measure for the glass once the tile is finished, not before. That’s how a frameless door actually closes with a clean gap.
  6. Final inspection, walk-through, and the promise. We pass the inspection, walk the shower with you, and hand over the written 90-Day Done Right Promise. If something’s not right, one call brings Tom back.

Walk-In Showers & Shower Remodeling Pricing in Glendale

Every shower is different, so treat these as honest ranges rather than a quote. Here’s what we see on real Glendale jobs.

Scope Typical range What moves it
Tile-and-pan refresh, same footprint $6,500 – $9,500 Tile choice, glass style, keeping the valve and drain where they are
Full walk-in shower with bench and niche $9,500 – $14,000 Bench framing, niche layout, tile size, frameless vs. framed glass
Curbless / zero-threshold shower $12,000 – $18,000 Floor framing, drain relocation, subfloor work, waterproofing detail
Valve or drain relocation $1,200 – $3,000 added Pipe runs, wall openings, permit scope

A few things drive the number up or down more than people expect. Curbless showers cost more because the floor has to be recessed or the whole bathroom floor has to come up an inch or two, and that’s framing and finish work on top of the shower itself. Tile price swings a lot: a basic porcelain and a large-format stone-look tile are not the same line item. Frameless glass is a real material cost, but it’s also the upgrade most people are happiest they made.

We carry premium surfaces too, and you can look up every one of them rather than take our word for a mystery brand off a van. Silestone and Caesarstone are both common picks for a shower bench top or the vanity beside it. If you want the ceiling and the shower seat to match the same stone, we can usually work that out in the allowance.

Estimates are free. We publish standing offers you can use on this job: $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. If a national outfit quoted you one price on the phone, bring us that written estimate and we’ll go through it with you line by line.

What Makes a Shower Last vs. Fail

Most shower failures we get called out to fix are waterproofing failures, not tile failures. The tile looks fine. The problem is behind it. A traditional mud pan built wrong, a liner that got punctured during construction, or a bench framed out of wood with no protection all fail the same way: water gets in, sits there, and rots the framing for a year or two before anyone notices.

We use a bonded sheet or liquid waterproofing membrane over a properly sloped pan, and we slope it toward the drain the whole way. We frame benches out of masonry or a waterproof foam block rather than wood. None of this is glamorous. It’s the difference between a shower you replace once and a shower you replace twice.

Glendale adds a wrinkle: we have a lot of hillside homes and older construction where the bathroom floor isn’t level and the drain was set to whatever the framing gave it. We check slope before we set anything. If the pan needs work, it goes in the written scope before we start, not after.

Why Glendale Homeowners Call Barrett & Sons

We’re a name-on-the-truck company, owner-operated since 1998, and Tom’s sons run the crews. You’re not getting a franchise dispatching a stranger. Our crew members are background-checked and uniformed on every visit, and a live person answers the phone around the clock, not a voicemail box or an out-of-state call center. Our technicians have up to 28 years of experience, and Tom publishes his name, his address, and his license number so you can look it up yourself before you sign anything.

The parts of the job you’ll feel most are the plain ones. Scope in writing. Allowances in writing. Change orders in writing before any scope change touches the job. Permits pulled and inspections signed on every eligible job. And a written 90-Day Done Right Promise on every completed job, one call brings Tom back. That’s how we’ve stayed at this for over 29 years in the communities we live in.

If your shower work is part of a bigger project, our Bathroom Remodeling in Glendale page covers the whole room, and you can start from our home page to see everything else we take on. We also work in nearby communities like Pasadena, Burbank, La Cañada Flintridge, Eagle Rock, Silver Lake, Atwater Village, Altadena, and Monrovia, plus Home Additions & ADU work when a shower is part of a bigger build.

FAQs – Walk-In Showers & Shower Remodeling

How much does a walk-in shower remodel cost in Glendale?

A walk-in shower remodel in Glendale generally costs $6,500 to $18,000. A tile-and-pan refresh in the same footprint runs the low end, a full shower with a bench and niche sits in the middle, and a curbless or zero-threshold shower with a relocated drain runs the top of that range. Call (844) 560-4526 for an exact quote, because estimates are free and we’ll put the number in writing.

Can you replace a tub with a walk-in shower?

Yes, and it’s one of the most common jobs we do in Glendale. A tub-to-shower conversion runs roughly $7,000 to $12,000 depending on the drain position and whether the valve moves. We pull the permit, do the waterproofing right, and pass the inspection before we hand the shower back to you. Call for a free estimate and we’ll tell you what your specific tub setup needs.

Do I need a permit for a shower remodel in Glendale?

In most cases, yes. Changing or relocating the shower valve or drain is a plumbing permit item, and a shower rebuild that involves moving plumbing or framing typically needs one. We pull it and schedule the inspection for you. If a contractor tells you permits are optional on a shower, that’s a reason to keep looking. Call us and we’ll tell you exactly what your job needs.

How long does a walk-in shower remodel take?

A straightforward walk-in shower takes about one to two weeks of working time, and a curbless shower that involves floor framing runs longer, often two to three weeks. Tile and glass lead times can add a few days, since we measure for glass after tile goes up. We give you a real schedule in the written scope. Call (844) 560-4526 to get yours started, and ask about the Free Second Opinion on Any Written Estimate if you’ve already got a quote in hand.

Get Your Free Walk-In Shower Estimate

If you’re tired of the tub wall, or the ceiling below the shower has a stain you’ve been ignoring, call us. Barrett & Sons Construction Glendale will walk your shower, give you an honest range, and put the whole scope in writing before any work starts. Every eligible job gets the permit pulled and the inspection signed, every price change arrives in writing, and the 90-Day Done Right Promise goes on the contract. Call (844) 560-4526 for a free estimate, and look up the license number yourself before you sign anything. We’re glad to be checked.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale.

Need Construction help in Glendale? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch