A Barrett company - serving Glendale, CA
Barrett & Sons Construction Glendale construction team

Driveway & Pavers in Culver City - Free Measure, Itemized Written Quote

Free on-site measure and a written price per square foot before we book you in. Proper base preparation and sealed edges, because a cheap base is why driveways crack.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Schedule Free Estimate

Call to schedule your free estimate

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Construction in Culver City, CA

Windows and doors are where most Culver City construction conversations start, and for good reason. The city’s 1920s – 1950s Spanish Colonial and California bungalow stock was built for a drier, quieter era, and single-pane originals on Carlson Park and Sunkist Park homes leak heat and street noise while the marine layer works steadily at the frames. We pull Culver City permits, put every scope and price change in writing, and back the finished job with our 90-Day Done Right Promise. Call (844) 560-4526 for a free estimate on windows, doors, roofing, or any of the work below.

Call (844) 560-4526

Why Culver City Homes Are Different

Culver City isn’t Los Angeles when it comes to permits. The city runs its own building department and fire authority, separate from LA City and County, with its own plan-check timelines and its own ADU and inclusionary requirements. Projects that straddle the Washington or Venice Boulevard line can sit for weeks waiting on the wrong jurisdiction’s paperwork, which is why we pull Culver City permits as a Culver City job and build the plan-check calendar into the schedule.

The housing tells its own story. Spanish Colonial and bungalow homes from the 1920s through the 1950s sit in Carlson Park, Sunkist Park, and the Fox Hills-adjacent blocks, and most of them still wear original single-pane windows and clay or wood roofs. When those homes get expanded or converted, foundation, electrical panel, and plumbing upgrades usually come with them.

The climate is mild and coastal-adjacent, with a marine layer that keeps moisture on north-facing walls and Santa Ana wind events that strip and stress older roofing. Freeze risk is minimal, so stucco and slab work run year-round. Fire-hardening standards matter on the hillside-adjacent lots, and dry-season brush clearance shapes how we schedule exterior work near the wildland edges.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our Main Culver City Services

These are the two biggest calls we get from Culver City homeowners, with the work that goes with them.

Driveway & Pavers in Culver City

Culver City’s older lots often carry cracked concrete poured decades ago, and the redevelopment boom around downtown has pushed driveway and paver work toward materials that hold up to heavy use and look right next to stucco and tile. We set base course and grading first, because a paver job is only as good as what’s under it. Belgard and Techo-Bloc products go in where the design calls for them, permits get pulled when the city requires them, and every change order comes in writing before we touch the ground. For the full scope, see Driveway & Pavers in Culver City.

Driveway & Pavers in Culver City

Fence Installation in Culver City

A Culver City fence has to clear the city’s height and setback rules, and that’s before the neighbors weigh in. We handle the permit side, set posts below the frost line the local soil calls for, and build vinyl, aluminum, or wood to the property line the survey shows. On the older bungalow blocks, a new fence often means replacing rotted posts and correcting a leaning run, so we price the removal and the haul-off in writing. The full detail is on our Fence Installation in Culver City page.

Fence Installation in Culver City

Home Additions & ADU in Culver City

The studio and Expo Line boom has made ADUs and additions the busiest construction category in Culver City, and the city’s inclusionary and rent-control rules mean the paperwork is as serious as the framing. We size the structure to the lot, upgrade the foundation, panel, and plumbing the older home needs, and route the plan check through Culver City’s own department rather than assuming LA County applies. Every allowance and change order is written before the first nail. Start with Home Additions & ADU in Culver City.

Home Additions & ADU in Culver City

Bathroom Remodeling in Culver City

Bathrooms in the 1940s Culver City bungalows tend to be small, and the plumbing behind the tile is often galvanized or past its service life. We open the walls, replace what’s failing, and set the new layout so the shower and vanity work with the room you actually have. Waterproofing gets done to code and inspected, not skimped, and tile selections are priced in writing before demo. See Bathroom Remodeling in Culver City for the full picture.

Kitchen Remodeling in Culver City

A Culver City kitchen remodel means working around a tight footprint and, on the older homes, a service panel that may need upgrading before the new range and hood go in. We plan the layout first, price cabinetry and counters in writing, and install premium brands you can look up yourself. Wellborn cabinets and Cambria quartz are common picks on the Westside, and both go in under a written allowance. The details are on Kitchen Remodeling in Culver City.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 560-4526

Windows & Doors in Culver City

Culver City’s bungalows and Spanish Colonials mostly still carry the single-pane windows and original wood doors that went in when they were built, and those are the weak points when the marine layer sits on the walls and Santa Ana winds push heat and grit against the glass. Replacing them cuts drafts, noise from nearby soundstages and Venice Boulevard, and heat gain all at once. Our Windows & Doors work covers installation and replacement, including impact-rated assemblies where the city’s fire-hardening requirements call for them, and every job gets permitted where eligible and priced in writing before we order a unit.

Window Replacement

Signs you need it

You know it’s time when the glass fogs between the panes, the frames stick or swell with the weather, or you can feel a draft along the sill on a cool marine-layer morning.

What it costs in Culver City

Window replacement in Culver City typically runs $4,500 – $15,000 across a whole house, depending on unit count, frame material, and whether the openings need reframing.

How we do it

We measure every opening, order the units, pull the Culver City permit where required, remove the old windows, flash and seal the new frames properly, and finish the interior trim before we clean up.

Impact Windows & Doors

Signs you need it

Impact-rated assemblies make sense when you’re near a wildland edge, replacing older glass that’s already cracked or brittle, or building new where the city’s fire-hardening standards apply.

What it costs in Culver City

Impact window installation in Culver City generally lands in the $8,000 – $25,000 range, driven by window count, the rating required, and how much of the existing framing has to be rebuilt.

How we do it

We confirm the rating the job needs, order impact-rated units and doors, pull the permit, install to the manufacturer’s spec with proper flashing and anchoring, and get the inspection signed before closeout.

What Windows & Doors Costs in Culver City

Item Typical range in Culver City
Window replacement $4,500 – $15,000
Impact window installation $8,000 – $25,000
Full-house window and door replacement $4,500 – $25,000

Do I need a permit to replace windows in Culver City?

Often yes, because Culver City runs its own building department and replacement windows can change the opening or the egress. We confirm what your address needs and pull the permit, so the inspection is signed and the work is documented.

How long does a window and door replacement take in Culver City?

Most whole-house replacements run a few days on site once the units arrive, with lead time on the order being the longer part. We give you the schedule in writing, including the Culver City plan-check time, before we start.

Roofing in Culver City

Culver City roofs take a specific beating: the marine layer keeps moisture on the cool north slopes, and Santa Ana wind events tear at older shingles and lift flashing. On the 1920s – 1950s Spanish Colonials, that often means original clay tile or a wood roof that’s been patched more than once. Our Roofing work covers repair and full replacement, with GAF and CertainTeed systems where the pitch and budget call for them, permits pulled where eligible, and the 90-Day Done Right Promise backing the finished job.

Roof Repair

Signs you need it

Look for curling or missing shingles, granules in the gutters, a stain spreading on a ceiling, or daylight at a rafter after a wind event.

What it costs in Culver City

Roof repair in Culver City typically costs $400 – $1,800, and tile roof repair runs $600 – $2,500 when broken clay has to be matched and reset.

How we do it

We get on the roof, find the actual source rather than the stain, replace the failed shingles or tile, reflash the penetrations and valleys, and seal it so the fix holds through the next wind event.

Roof Replacement & Installation

Signs you need it

When the roof is past its service life, patched in several places, or the underlayment has failed under tile, a full replacement is the honest call.

What it costs in Culver City

Roof replacement in Culver City generally runs $8,000 – $20,000, and metal roof installation runs $15,000 – $40,000 depending on material and roof complexity.

How we do it

We tear off to the deck, repair any rotted sheathing, install new underlayment and roofing to manufacturer spec, pull the permit, and get the Culver City inspection signed before we call it done.

What Roofing Costs in Culver City

Item Typical range in Culver City
Roof repair $400 – $1,800
Roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

Will a roof repair be cheaper than a replacement in Culver City?

Usually, if the failure is isolated and the rest of the roof has life left. Once the underlayment is gone across the field, repair money gets thrown at a losing roof, and we’ll tell you which case you’re in.

Do you pull roofing permits in Culver City?

Yes, where the job is eligible. Culver City has its own building department, so we pull the Culver City permit directly rather than assuming LA County applies, and we get the inspection signed on completion.

Brands We Service in Culver City

We install and work with premium brands across the trades, including Wellborn and Cambria for kitchens and certain name-brand roofing and window systems. We don’t claim stocked parts or local inventory; we order to your job. Typical brand-part turnaround on a Culver City job is a matter of days. You can look through our brands to verify what goes in.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Construction in Culver City, CA

Service Typical range in Culver City
Window replacement $4,500 – $15,000
Impact window installation $8,000 – $25,000
Roof repair $400 – $1,800
Roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000
Tile roof repair $600 – $2,500
Bathroom remodel $9,000 – $28,000
Kitchen remodel $14,000 – $45,000
Paver driveway installation $7,000 – $18,000
ADU construction $90,000 – $220,000

In Culver City, price climbs with the city’s own plan-check timelines, fire-hardening and inclusionary requirements on additions, and the foundation, panel, and plumbing upgrades the older housing stock usually forces once walls open. That’s why every scope, allowance, and price change comes as a written change order before work happens, so the number on the page is the number on the invoice.

Neighborhoods We Serve in Culver City

We work across the city’s residential blocks and the mixed-use infill around downtown and along Venice and Washington Boulevards. If your address is in ZIP codes 90232, 90230, 90231, or 90233, we cover it, and we’ll confirm the plan-check path for your specific lot before we quote.

  • Carlson Park
  • Sunkist Park
  • Fox Hills
  • Downtown Culver City
  • Along Venice and Washington Boulevards

We schedule free estimates across Culver City promptly, and we tell you up front when the city’s plan-check calendar will stretch a job out.

Service Area – Cities Near Culver City

Culver City sits at the center of the Westside, and our work reaches the neighboring communities that share its climate, housing stock, and permitting realities. We work in Marina del Rey, CA, where the marine layer is heaviest, and in Beverly Hills, CA with its own stricter plan-check. We also cover View Park-Windsor Hills, CA and Santa Monica, CA. Call (844) 560-4526 and we’ll confirm your address and set up a free estimate.

Serving Culver City, CA – Our Local Coverage Area

We serve Culver City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Construction in Culver City

Ready to get started? Free estimates in Culver City
Call (844) 560-4526

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local construction pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Culver City Customers Say

★★★★★ 5.0 from 7+ reviews

"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."

- Redmond Cavanaugh

"Full kitchen down to the studs. He found the previous owner had done the wiring himself and it was genuinely dangerous, showed me, and put it right properly rather than boxing it back in."

- Augustus Nwachukwu

"Came back a year later to sort a door that had dropped as the frame settled. No charge and no argument about whether it was covered."

- Thaddeus Oyelowo

How It Works in Culver City

Getting your construction project started is simple.

1

Call or Request a Free Estimate

Tell us about your construction project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Culver City. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch