Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Glendale
If you’re pricing a new fence in Glendale, most wood, vinyl, and aluminum installations here run between $3,500 and $9,000 depending on length, material, and how much site work the hillside demands. We know this city’s lots block by block, from the bungalows around Adams Hill to the steep parcels up in Chevy Chase Canyon, and that matters when a fence has to hold on a slope or meet fire-zone rules. Call (844) 560-4526 and a live person picks up, day or night.
Why Barrett & Sons Construction Glendale Is Glendale’s Preferred Fence Installation Company
Barrett & Sons Construction has been owner-operated since 1998, and that shows up in how a fence job gets run here. Tom Barrett and his sons are on site most days, so you’re dealing with the same people who quoted the work, not a national outfit that reads you a number over the phone and hands you a different bill at the door. Glendale homeowners have been burned by that before, and they tell us so.
What earns repeat calls around Glendale is the paperwork. Every scope, every allowance, and every price change arrives as a written change order before a single post goes in the ground, because an allowance that isn’t on paper is a surprise waiting for a date. We pull permits and get inspections signed on every eligible job, and the whole thing is backed by our written 90-Day Done Right Promise – one call and Tom comes back to make it right. You can look up his name, address, and license number before you sign anything. That’s the point.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Glendale
Our Fence Installation crew handles the full range of residential and commercial fencing, with a focus on the materials that make sense in Glendale’s sun and fire zones. Here’s where most of the work lands.
Wood Fence Installation in Glendale
Wood remains the most common request in Glendale, and for good reason – it fits the Craftsman and Spanish Colonial bungalows near downtown and the stucco tract homes up north. On hillside lots we set posts deeper in concrete with drainage planned in, because Glendale’s expansive clay soils and concentrated runoff will lean a shallow post inside a few seasons. In fire-hazard zones we specify ignition-resistant lumber and ember-resistant detailing rather than standard cedar.

Iron Fence Installation in Glendale
Wrought iron and ornamental steel give you the security of metal with a look that suits the older housing stock. These hold up well against Glendale’s semi-arid sun and the Santa Ana winds that hammer west-facing slopes, and they need almost no finish maintenance compared with wood. We coordinate the powder-coat color and gate hardware so the fence and gate read as one piece.

Privacy Fence Installation in Glendale
Tall privacy fencing is a frequent ask on the tighter lots around Adams Hill and the hillside streets off Glenoaks, where neighbors sit close and a six-foot screen earns its keep. We’re careful with height limits and property-line setbacks here, since Glendale enforces both and a fence that crosses a survey line becomes someone else’s problem fast. Property lines get verified before we dig.

Aluminum Fence Installation in Glendale
Aluminum is the low-maintenance choice for pool enclosures, front-yard boundaries, and commercial frontage. It won’t rot, termites leave it alone, and it holds color through Glendale’s dry summers far better than wood. A typical aluminum fence installation in Glendale runs $4,000 – $10,000 depending on run length, height, and gate count.
We also install chain link, vinyl, and gates, handle fence repair, and take on commercial fencing for Glendale properties.
Trusted Brands We Service in Glendale
When a fence project involves glazing for a pool enclosure or a patio screen that ties into the fence line, we install brands you can look up rather than mystery products off a van. We work with CGI and CWS on glass and screen components, and we specify premium hardware and gate operators by name so you know exactly what you’re paying for. We don’t keep parts on hand – there’s no warehouse to stock – so lead times come straight from the manufacturer. Materials arrive as the schedule calls for them, and we tell you the wait up front rather than after you’ve signed.
Common Fence Installation Problems We See in Glendale Homes
- Posts that rot and lean in clay soil. Glendale’s expansive clay holds water and swells, and on hillside lots runoff concentrates at the low corner of a property. Posts set shallow and without drainage lean within a few seasons, which is why footing depth and grading get planned before we dig.
- Fences that fail Chapter 7A in fire zones. Much of Glendale sits in Very High Fire Hazard Severity Zones across the Verdugos and San Rafael Hills, where combustible materials or missing ember-resistant details can trigger a costly change order or a failed re-inspection. Standard wood that passes in Burbank may not pass here.
- Unpermitted additions at the property line. In hillside neighborhoods, we regularly run into undocumented additions and non-engineered deck or retaining-wall tie-backs from decades past. Glendale’s building department now requires as-built verification and engineering before issuing permits on those parcels, so the fence schedule waits on that sign-off.
- Sun and wind breaking down finishes fast. Glendale’s semi-arid climate and Santa Ana wind-driven summers wear south- and west-facing fence panels and finishes faster than shaded flatland lots. It’s a common reason wood fences here need refinishing or repair sooner than their listed service life.
Pricing for Fence Installation in Glendale, CA
Here’s where fence installation lands in Glendale’s market. On this tier, lead times – not labor – usually set the calendar, so the price gets fixed in writing before we order anything, and the written scope spells out what happens if a hidden site condition changes the plan.
| Service | Typical Glendale Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Wood, iron, and privacy fences fall within similar bands for comparable lengths, with hillside footing work and fire-zone materials pushing toward the top of the range. Estimates are free and line-item, so you can see exactly what drives the number before you commit. Call (844) 560-4526 for an exact quote.
See the difference
Before
After
Before
After
Before
AfterWe Also Serve Cities Near Glendale
We work throughout Fence Installation in Glendale and the surrounding area, so if you’re just over the line you’re still in our range. That includes Burbank, Los Angeles, West Hollywood, and Beverly Hills. Request free Fence Installation estimates in any of them and we’ll give you the same line-item pricing we do at home.
Serving Glendale, CA – Our Local Coverage Area
We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Glendale
In most of the hillside area, yes. Because much of Glendale’s residential area in the Verdugo Mountains and San Rafael Hills sits in Very High Fire Hazard Severity Zones, fence installations there often must use ignition-resistant materials and ember-resistant detailing under Chapter 7A – a requirement that doesn’t apply to typical fence replacements in flatland neighbors like Burbank. We check your parcel’s zone before specifying materials so you don’t order a combustible fence you can’t legally build. Call (844) 560-4526 for a free estimate and we’ll walk the zone question with you.
Because hillside parcels here often carry undocumented additions or non-engineered retaining walls at the property line. When that turns up, Glendale’s building department requires as-built verification and engineering before it will issue the permit, and that step can take weeks. We pull every permit and get inspections signed, but we’re candid that with hillside jobs the sign-off, not the build, drives the date. Call (844) 560-4526 to talk through your property.
Metal – iron, steel, or aluminum – holds up best overall, because it doesn’t rot and it keeps its finish through the dry heat and wind-driven summers. Wood is still popular for its look, but expect to refinish it more often, especially on south- and west-facing exposures where the sun does its damage. In fire zones, ignition-resistant or noncombustible materials are often required regardless of preference. Call (844) 560-4526 and we’ll match material to your lot.
Get the scope, the allowances, and the price in a written document before anyone orders materials. That’s how we work: every price change arrives as a written change order before the work proceeds, and the fixed total is set once the scope is set – including allowances for hidden conditions like unexpected footings on a slope. No surprise invoice at the end. Call (844) 560-4526 for a free line-item estimate.
It can, and it does more often on hillside properties than anywhere else. When Glendale’s building department processes a fence permit on a parcel with a hillside or an older structure, undocumented additions or unpermitted deck tie-backs can surface, and the city may require as-built verification before proceeding. It’s worth having that conversation before you dig. Call (844) 560-4526 and we’ll help you sort out what your parcel needs.
Ready for a Fence That Fits Glendale?
A fence is one of those projects where the details carry it – verified property lines, footings that survive clay soil, materials that survive the sun, and a scope that’s fixed in writing before the first post goes down. Owner-operated since 1998, backed by the written 90-Day Done Right Promise, with permits pulled and inspections signed on every eligible job. Call (844) 560-4526 to schedule your free estimate.
Related Services
Written by the team at Barrett & Sons Construction.