Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Really Costs to Hire a General Contractor in Glendale, CA
Hiring a general contractor in Glendale typically runs 15% to 22% of your hard construction costs, so a $120,000 remodel carries a GC fee of roughly $18,000 to $26,000. That fee is the honest number. What catches homeowners off guard is the work a lower bid quietly left out: fire-zone compliance, plan-check resubmittals, a soils report, an engineer’s as-built sign-off. Call (844) 560-4526 for a free second opinion on any written estimate, and we’ll show you what a real Glendale scope looks like line by line.
Glendale is a built-out city. Almost nothing gets built on open land here, so the work is remodels, additions, and hillside rebuilds. That changes the math on a contractor’s fee, because the fee has to cover the city’s review process, not just a crew swinging hammers. On a 1920s Spanish Colonial near Adams Hill or a 1960s stucco in the north end, the older wiring, galvanized plumbing, and unreinforced masonry all have to meet current seismic and Title 24 standards once you open the walls. None of that is optional, and none of it comes free.
Key Takeaways
- Owner-operated GCs in Glendale usually charge 15-22% of hard costs, higher on hillside and fire-zone projects.
- Chapter 7A fire-zone items (ignition-resistant siding, ember-resistant vents, Class A roofing, tempered glazing) are mandatory in much of the city, not upgrades.
- Permit expediting and plan-check resubmittals run longer in Glendale than in neighboring flatland cities.
- The lowest percentage bid often wins the job and loses the customer, because the missing scope comes back as change orders.
- Every scope, allowance, and price change from us arrives in writing before a single nail moves.
The 15% fee that isn’t 15%: why Glendale bids don’t compare on percentage alone
A 15% GC fee on a $120,000 Glendale remodel sounds steep until you see what the contractor quoting 10% left off the base number. That 10% bid is a real number, and it’s also a moving target. The fire-zone compliance, the as-built drawings, and the soils report are all sitting just off the page, waiting to be handed to you on a change order six weeks in.
Here’s what the fee actually has to cover in this city:
- Permit work and expediting. Pulling the permit is the start. Then there’s Glendale Building & Safety plan check, and resubmittals when the reviewer sends comments back, which happens more here than in Burbank or Pasadena because of the fire overlay and seismic rules on the same plan set.
- Sub scheduling across trades. Framing, electrical, plumbing, HVAC, drywall, finish. Each one has its own inspection window, and a missed window stalls everything behind it.
- Fire-zone line items. In the Very High Fire Hazard Severity Zones running through the Verdugos and San Rafael Hills, ignition-resistant siding, ember-resistant vents, Class A roofing, and tempered glazing are construction requirements. A low-bid GC that excludes them isn’t being cheap, they’re being quiet.
- As-built and engineering verification. Hillside streets off Glenoaks and up in Chevy Chase Canyon turn up undocumented additions and old deck or balcony tie-backs that were never engineered. Glendale’s building department now wants an engineer and as-built drawings before it will issue permits on those properties. That coordination takes time and money, and most GC cost guides never mention it.
- Warranty administration. Somebody has to come back. On a written 90-Day Done Right Promise, that somebody is us.
The permit inspector works for you, not for the contractor. A GC who treats inspection as an obstacle instead of a checkpoint is one you should watch closely.
How Chapter 7A quietly widens the gap between two bids
Two bids on the same Glendale addition can look $20,000 apart when the real difference is fire-zone compliance that only one of them priced. Chapter 7A of the California Building Code isn’t a suggestion in the hills. It’s mandatory, and it turns what would be routine in a flatland city into extra line items here: fire-rated exterior assemblies, screened attic and crawlspace vents, roof covering that meets the Class A standard, and window glazing that holds up to heat. The wildland-urban interface in the Verdugos makes fire-hardening and defensible-space work a routine part of the job, not a specialty add-on.
When you compare bids, ask each GC to show you, in writing, the fire-zone items priced into their base number. If they can’t, that’s your answer.
What contractor pricing looks like in Glendale, trade by trade
The GC fee sits on top of hard costs, so it helps to know roughly what those hard costs are. These are typical Glendale ranges for the work the fee is applied against.
| Project | Typical Glendale range |
|---|---|
| Kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Bathroom remodel | $9,000-$28,000 |
| Walk-in shower installation | $4,500-$12,000 |
| Home addition | $45,000-$130,000 |
| ADU construction | $90,000-$220,000 |
| Garage conversion | $30,000-$80,000 |
| Roof replacement | $8,000-$20,000 |
| Window replacement | $4,500-$15,000 |
| Impact window installation | $8,000-$25,000 |
| Paver driveway installation | $7,000-$18,000 |
Those hard-cost ranges plus a 15-22% fee give you a realistic all-in number. A $45,000 kitchen remodel with a 18% fee lands near $53,000; an ADU in the $150,000 range carries a fee close to $27,000. Kitchen work with KraftMaid cabinetry and a Cambria countertop prices differently than a stock-cabinet refresh, and on the exterior, GAF or CertainTeed roofing and Andersen or Marvin windows also move the hard cost, which moves the fee with it.
What separates a contractor you’ll keep from one you’ll regret
Price is the easy part to compare. These are the things that decide whether the project is smooth or a fight:
- Written change orders. Every scope change, every allowance adjustment, on paper, signed, before the work happens. An allowance that isn’t on paper is a surprise waiting for a date. Barrett & Sons Construction Glendale prices the job this way, so the fee percentage applies to a number you can see in full.
- Permits pulled and inspections signed. Every eligible job. The last contractor most homeowners used told them permits were optional. They aren’t, and an unpermitted add-on becomes your problem when you sell.
- A name you can verify. Ask for the address and the license number and look them up before you sign anything. You should be able to find them.
- Materials you can research. Named brands, not mystery products off a van.
- A phone that a person answers. Crews here carry up to 28 years of experience and are background-checked and uniformed on every visit.
We’ve been a local, owner-operated construction company since 1998, and that matters most when something needs to be made right. The written 90-Day Done Right Promise means one call brings us back. Standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
FAQs
Expect 15-22% of your hard construction costs, with the higher end on hillside, fire-zone, and older-home projects. On a $120,000 remodel, that’s roughly $18,000-$26,000. Call (844) 560-4526 for an exact quote, and estimates are free.
Usually because the fire-zone compliance, engineering, or permit resubmittals aren’t in it. A low percentage bid often recovers its margin later through allowance manipulation and unapproved substitutions. Call (844) 560-4526 and we’ll walk through both estimates with you.
It depends on what’s behind the wall. Original galvanized plumbing, cast-iron drains, and knob-and-tube wiring should be replaced once they’re exposed, because the alternative is opening the same wall twice. Call (844) 560-4526 for a straight answer on your specific house.
A live person answers the phone around the clock, and we’ll schedule your free estimate at the first opening that works. Call (844) 560-4526 to book it.
If you’re comparing bids right now, take the free second opinion. We’ll sit down with any written estimate, show you what’s in it, and flag the fire-zone, permit, and engineering items that may be missing before you sign. Call (844) 560-4526 today, or reach out through our home page to get started. Upfront pricing, written change orders, and a name that answers its own phone.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale, CA.
What Our Customers Say
"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh"Full kitchen down to the studs. He found the previous owner had done the wiring himself and it was genuinely dangerous, showed me, and put it right properly rather than boxing it back in."
- Augustus Nwachukwu"Came back a year later to sort a door that had dropped as the frame settled. No charge and no argument about whether it was covered."
- Thaddeus Oyelowo