Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterConstruction Companies Near Me in Glendale, CA: What a Hillside Permit Really Takes
The short answer: if you’re searching “construction companies near me” in Glendale, look for one that has actually pulled permits in Glendale’s Very High Fire Hazard Severity Zones and on its hillside parcels. Glendale is one of the harder permitting environments in the San Gabriel Valley. Chapter 7A fire-resistant construction, seismic retrofit mandates, and pre-permit engineering verification on hillside lots can all land on a single remodel. Barrett & Sons Construction Glendale has worked these departments through multiple code cycles. Call our home page team at (844) 560-4526 for a free estimate, and a live person answers, day or night.
Why Construction in Glendale Isn’t Like Burbank or Pasadena
Most construction companies near Glendale have done a kitchen or added a room. Fewer have managed a hillside remodel where the city required as-built engineering drawings, a Chapter 7A fire-assembly inspection, and a soft-story seismic review, all before framing started. That’s the job here more often than you’d think.
Glendale is built out. Nearly every project is a remodel, an addition, or a hillside rebuild rather than greenfield work. Much of the city sits in Very High Fire Hazard Severity Zones in the Verdugo Mountains and the San Rafael Hills. That means ignition-resistant siding, ember-resistant vents, Class A roofing, and tempered glazing apply to remodels and additions that would be routine in a flatland city. Stack that with Glendale’s own seismic retrofit mandates for soft-story and pre-1980 buildings, and the permit path gets longer, not shorter.
Then the housing stock adds its own complications. Near downtown and Adams Hill you’ll find 1920s-40s Spanish Colonial and Craftsman bungalows. The north side runs to mid-century and 1960s stucco tract homes. Up in the hills, steep-lot custom homes. We regularly open walls and find knob-and-tube or early Romex wiring, original galvanized and cast-iron plumbing, and unreinforced masonry that has to come up to current seismic and Title 24 standards during the remodel. None of that is a surprise to us anymore. It’s a line item we plan for.
And on hillside streets off Glenoaks and in Chevy Chase Canyon, we routinely discover undocumented unpermitted additions and non-engineered deck or balcony tie-backs from decades past. Glendale’s building department now requires engineering and as-built verification before it issues permits on those properties. That step stalls projects in cities that never flag it. Knowing to expect it is the difference between a six-week delay and a smooth start.
What to Look for in a Glendale Construction Company
Here’s what separates a contractor who can build from one who can build here.
- They pull permits on every eligible job. The last contractor most customers used told them permits were optional. In Glendale they aren’t, and the inspection record protects the homeowner, not the contractor.
- They put scope, allowances, and change orders in writing before work happens. Permit-triggered scope additions happen here all the time: a fire-rated vent assembly, an engineered connection, a shear-wall upgrade the inspector calls for. A less transparent contractor buries that in a “standard allowance.” An allowance that isn’t on paper is a surprise waiting for a date.
- They name the brands they install. We carry GAF and CertainTeed on roofs, Andersen and Marvin on windows, and Belgard and Techo-Bloc on hardscapes. Those brands publish fire and performance ratings, which matters when a Chapter 7A assembly has to satisfy a Glendale inspector without an argument over substitution.
- They’ll show you who they are. A name on the truck, an address, a license you can look up. Ours are published. Look them up before you sign anything.
Barrett & Sons has worked Glendale since 1998. Tom Barrett and his sons are on-site most days. This isn’t a franchise dispatching strangers who quote one price on the phone and hand you a different bill at the door. Our crew members are background-checked and carry the Barrett & Sons name. Every completed job is backed by the written 90-Day Done Right Promise: if it isn’t done right, one call brings us back.
What Construction Work Do We Handle in Glendale?
Every trade that touches a Glendale home, under one name and one warranty.
Kitchen and bathroom remodeling. We install KraftMaid and Cambria in kitchens, and we plan for the plumbing and wiring upgrades that old Glendale homes require. A kitchen remodel in Glendale runs $14,000 to $45,000; a small kitchen $9,000 to $20,000. Bathroom remodels run $9,000 to $28,000, and a small bathroom $5,000 to $12,000.
Roofing. South- and west-facing walls here take a beating from hot, dry, Santa Ana wind-driven summers, so roofing fails faster on those exposures. Roof replacement runs $8,000 to $20,000; repairs $400 to $1,800; metal roofing $15,000 to $40,000. On Chapter 7A homes we install Class A assemblies that pass inspection the first time.
Windows and doors. Window replacement runs $4,500 to $15,000; impact window installation $8,000 to $25,000 when fire-zone glazing applies.
Driveways and pavers. Paver driveway installation runs $7,000 to $18,000; concrete driveways $4,500 to $12,000. We use Belgard and Techo-Bloc hardscapes on steep Glendale lots.
Fencing. Vinyl fence installation runs $3,500 to $9,000; aluminum $4,000 to $10,000. Jerith, Bufftech, and ActiveYards are brands we fit.
Additions and ADUs. A home addition runs $45,000 to $130,000; ADU construction $90,000 to $220,000; garage conversion $30,000 to $80,000. These are the jobs where hillside engineering and fire-zone assemblies hit the permit desk together, and where our process shows its value.
Before any scope change touches a Glendale job, it arrives as a written change order. No surprise invoices at the end. Our technicians have up to 28 years of experience, and every eligible project gets permits pulled and inspections signed.
What Do These Prices Actually Include?
| Project | Typical Glendale Range |
|---|---|
| Kitchen remodel | $14,000 - $45,000 |
| Small kitchen remodel | $9,000 - $20,000 |
| Bathroom remodel | $9,000 - $28,000 |
| Roof replacement | $8,000 - $20,000 |
| Window replacement | $4,500 - $15,000 |
| Paver driveway | $7,000 - $18,000 |
| Home addition | $45,000 - $130,000 |
| ADU construction | $90,000 - $220,000 |
Ranges vary with fire-zone requirements, structural upgrades, and hillside engineering. We give you a written scope and written allowances before work begins, so you know what’s included. Ask about our standing offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
FAQs
Yes, for most remodels, additions, and any work that touches structure, electrical, plumbing, or fire-resistive assemblies. Glendale’s building department reviews every eligible job, and hillside parcels often require as-built engineering verification before a permit is issued. We pull the permit and get the inspection signed on every job that qualifies, because the permit inspector works for you, not for us. Call (844) 560-4526 and we’ll tell you what your project needs.
A home addition in Glendale typically runs $45,000 to $130,000, and an ADU runs $90,000 to $220,000. The range depends on fire-zone assemblies, structural upgrades, and hillside engineering, which come up more often here than in neighboring cities. You get every scope and allowance in writing before work starts. Call (844) 560-4526 for an exact quote; estimates are free.
Chapter 7A is California’s fire-resistant construction standard for homes in Very High Fire Hazard Severity Zones, requiring ignition-resistant siding, ember-resistant vents, Class A roofing, and tempered glazing. Much of Glendale sits in those zones in the Verdugo Mountains and San Rafael Hills, so it applies to remodels and additions that would be routine elsewhere. We install Class A rated assemblies from named brands so the inspection passes without substitution arguments.
Often, yes, but it takes engineering and as-built verification first, which Glendale’s building department now requires before permits on those properties. On hillside streets off Glenoaks and in Chevy Chase Canyon, we routinely find undocumented additions and non-engineered deck tie-backs from decades past. We’ll assess what’s there and map a path to permit. Call (844) 560-4526 for a free estimate.
Get a Straight Answer on Your Glendale Project
If you’re ready to hire a name-on-the-truck construction company instead of a call center, call Barrett & Sons Construction Glendale at (844) 560-4526. A live person answers, 24/7. We’ll walk your Glendale property, explain the permit path, and put the whole scope in writing before a single nail moves. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale, CA.
What Our Customers Say
"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh"Full kitchen down to the studs. He found the previous owner had done the wiring himself and it was genuinely dangerous, showed me, and put it right properly rather than boxing it back in."
- Augustus Nwachukwu"Came back a year later to sort a door that had dropped as the frame settled. No charge and no argument about whether it was covered."
- Thaddeus Oyelowo