Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Glendale Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Glendale, CA – frameless shower enclosures, walk-in shower installs, tub-to-shower conversions, and the diagnosis and repair that keeps a Mr-Glass door hanging plumb years after it’s set. What makes our Mr-Glass work different is that we treat the enclosure as a hardware system, not a decoration: we look at how the hinge is blocked, where the seal is failing, and whether the glass is sitting square in the opening before we quote anything. We are not affiliated with, authorized by, or acting as an agent of Mr-Glass; we’re an independent local shop that works on these fixtures every week. Call (844) 560-4526 to schedule a free estimate.
Why Trust Barrett & Sons Construction Glendale for Your Mr-Glass Construction?
Our crew members have handled enough Mr-Glass frameless pivot and sliding enclosures to know the difference between a hinge that’s loose and a hinge that was never anchored right in the first place. We work with OEM-compatible parts for Mr-Glass hardware – hinge kits, top-rail rollers, lower sweeps, and wall-jamb gaskets that match the original bore spacing and glass thickness – so a repair doesn’t force you into a full replacement. We also work warranty-safe: we don’t drill new holes in tempered glass, we don’t modify the door geometry beyond what the frame spec allows, and we document what we did so you have a record if a manufacturer question ever comes up.
The team has up to 28 years of experience across glass, tile, and framing work. Every eligible job gets permits pulled and inspections signed, every scope change arrives as a written change order before work proceeds, and every completed job is backed by our written 90-Day Done Right Promise. We’re owner-operated, and the crew that shows up is the crew that carries our name. If you want to verify us before you sign anything, our license number is published and you can look it up yourself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Glendale
Most of what we get called out for on Mr-Glass enclosures isn’t a glass problem at all – it’s a hardware or blocking problem that shows up as a glass problem. Here’s what we see most often.
- Pivot and hinge screws pulling from soft or under-blocked studs. In a frameless pivot door, the hinge carries the full weight of 1/4 in. or 3/8 in. tempered glass. When it’s screwed into drywall, a hollow stud cavity, or a stud that was never properly backed, the screws wallow out and the door starts to sag – and then it drags on the curb every time you open it. This is the single most common Mr-Glass failure we see.
- Lower door sweep and seal failure. The sweep is the flexible strip along the bottom of the door that keeps water inside the shower. It wears, hardens, or tears loose, and water runs out under the glass onto the curb and the drywall beside it. Left long enough, that’s soft wood and staining behind the baseboard.
- Silicone and channel gasket breakdown at the wall jamb. The vertical channel where the fixed panel meets the tile relies on a gasket and a bead of silicone to stay watertight. When that bead fails – usually from age, movement, or a cleaning product that ate the sealant – water migrates slowly behind the tile and mold shows up at the base of the shower weeks or months later.
- Top-rail roller wear on sliding doors. The rollers in the top rail take the load on a sliding Mr-Glass door. As they wear, the panel loses its vertical alignment, hangs out of plumb, or jumps the track entirely. Cheap replacement rollers fix it for a few months and then fail again – the geometry has to be reset, not just the wheel swapped.
- Glass out of square with the opening. Older Glendale bathrooms rarely have a perfectly plumb, square opening, and a frameless panel that was templated for a square opening will bind, leak, or never sit right against the curb. This is where an honest measurement before ordering saves a lot of money.
Here’s how that usually plays out in the real world. A frameless Mr-Glass pivot door starts dragging on the curb and the top hinge looks loose. The usual cause is hinge screws that were never anchored into solid blocking. A qualified local pro will re-block or reinforce the jamb, reset the hinges plumb, replace the worn sweep, and re-seal the wall channel – and check the curb for water damage before closing it back up, because that’s the part nobody sees until it’s expensive.
Mr-Glass Parts & Our Repair-vs-Replace Approach
Mr-Glass hinge kits, sweeps, seals, and rollers are the wear points on every enclosure. That’s not a knock on the product – it’s how glass shower hardware works. The question is whether the replacement part is a quality OEM-equivalent piece or a bargain-bin roller from an online marketplace that fails in six months. We source hardware that matches the door’s original bore spacing, glass thickness, and load rating. We don’t keep a local stock of Mr-Glass parts; we measure the specific unit and order to match, which is why we want eyes on the door before we quote.
Our repair-vs-replace call is simple and honest. If the glass is intact, the door closes true, and the failure is in the hardware, we repair it – hinge kit, sweep, roller set, seal. If a panel is chipped, cracked, or the glass is fundamentally out of square with the opening, replacing the door assembly is usually the smarter dollar than a full tear-out. The tile is rarely the wear item. The enclosure is. Call (844) 560-4526 and we’ll tell you which one you’re looking at.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We check the hinge blocking, door plumb, sweep condition, wall-jamb seal, and curb for moisture. We measure glass thickness and opening squareness so the quote reflects your actual bathroom, not a showroom.
- 2
Repair or install. For a repair, we re-block or reinforce the jamb, reset the hinges, and replace the worn hardware. For an install, we template the opening, set the channel and hinges plumb, and hang the panel with the correct clearances for a 1/4 in. or 3/8 in. door.
- 3
Test. We cycle the door, check it stays closed, run water to confirm the sweep and jamb hold, and confirm the curb shows no moisture migration before we’re done.
- 4
Warranty and documentation. We hand you a written record of what was replaced and how it was set, backed by our 90-Day Done Right Promise. If it’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Glendale
We handle the Mr-Glass frameless pivot shower door lines in both 1/4 in. and 3/8 in. tempered glass, including Neo-Angle and return-panel configurations. We service the sliding glass shower door series with top-rail rollers, and the semi-frameless hinged shower doors in the Deluxe and Elite-type lines. That covers the hinge kits, sweeps, seals, gaskets, and roller assemblies those lines use. If you’re converting a tub to a walk-in shower, we’ll spec a frameless enclosure that fits the new pan and tile opening correctly. If you have a Mr-Glass unit we haven’t listed, call and describe it – we’ll tell you straight whether it’s something we service.
We Also Service These Brands
Mr-Glass is one brand in a wider trade. We also work with KraftMaid and Cambria in kitchen and bath cabinetry and surfaces, Silestone quartz countertops, and Kohler fixtures and faucetry. If your project touches the shower and the vanity at the same time – a bathroom remodel, say – we can handle both scopes under one written proposal instead of handing you off to three different trades.
FAQs – Mr-Glass Construction Service in Glendale
Is Barrett & Sons Construction Glendale authorized by Mr-Glass?
No. We’re an independent local shop, not a Mr-Glass-authorized dealer or service center, and we don’t claim to be. We work on these fixtures because we know them, not because we carry a badge – our work stands on diagnosis and workmanship. Call (844) 560-4526 for a free estimate.
Do you use genuine Mr-Glass/OEM parts?
We use OEM-compatible hardware that matches the door’s bore spacing, glass thickness, and load rating – quality parts, not bargain-bin substitutes. In some cases a genuine OEM part isn’t available for an older unit, and we’ll tell you upfront what we’re using and why it’s the right match. Call (844) 560-4526 and we’ll walk you through it.
How long does Mr-Glass service take?
A hardware repair – hinge reset, sweep replacement, seal – is typically a single visit. A new frameless enclosure install or a tub-to-shower conversion depends on templating and glass lead time, so the schedule is set by the measurement and fabrication, not the install day. We give you a realistic timeline in writing before you commit. Call (844) 560-4526 to book your estimate.
What Mr-Glass models/series do you cover?
We cover the frameless pivot lines in 1/4 in. and 3/8 in. tempered glass, including Neo-Angle and return-panel configurations; the sliding series with top-rail rollers; and the semi-frameless hinged doors in the Deluxe and Elite-type lines. If yours isn’t on that list, call and describe it – we’ll tell you if we can help.
Will service void my Mr-Glass warranty?
Proper service with matching hardware and no drilling into tempered glass doesn’t void a warranty. The damage comes from unqualified work – new holes in glass, wrong-size hinges, modified door geometry. We work warranty-safe and document what we did, so you have a record if a question ever comes up.
How much does Mr-Glass construction cost in Glendale?
Here’s the line-item pricing we quote most in Glendale:
| Service | Typical Range |
|---|---|
| Frameless Glass Shower Enclosure / Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
Hardware-only repairs sit well below these ranges. Call (844) 560-4526 for an exact quote – estimates are free, and we’ll tell you honestly whether you need a repair or a replacement.
Book Your Mr-Glass Service in Glendale, CA
If a Mr-Glass door is dragging, leaking, or won’t stay closed, get it looked at before it becomes a larger problem. We’re owner-operated, we pull permits where they’re required, we put scope and any price change in writing, and we back the work with our 90-Day Done Right Promise. A live person answers the phone around the clock. Call (844) 560-4526 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Glendale.