A Barrett company - serving Glendale, CA

Delta Construction in Beverly Hills, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Construction in Beverly Hills, CA | Barrett & Sons Construction Glendale

We’re an independent Delta service provider working across Beverly Hills, and the one thing that separates our Delta work here from anywhere else is this: most of what we touch sits inside homes that the city already watches closely. A Delta Monitor valve swap in a 1920s estate isn’t a five-minute fix, it’s a documented line in a permit set that has to clear cultural heritage review. We pull the permits, write the scope, and make sure the fixture change survives inspection. Call (844) 560-4526 for a free estimate.

Call (844) 560-4526

Barrett & Sons Construction Glendale is owner-operated and has handled Delta fixtures and valves for over 29 years. We’re independent, not affiliated with or authorized by Delta, which means we fit the brand on its merits and tell you plainly when a rebuild beats a swap. That’s Delta service the way a neighbor would want it, in a city where the paperwork matters as much as the wrench.

Why Beverly Hills Residents Choose Us for Delta Service

We work on Delta products every week without dealer backing. No manufacturer program pushing us toward a particular model, no incentive to sell you trim you don’t need. In a Beverly Hills estate bath, that matters, because the right answer is sometimes a $60 OEM cartridge and sometimes a full valve replacement, and you deserve the honest version of that call.

Our crews know the Delta lines cold – Monitor 14 and 17 series, Trinsic, Cassidy, Addison, Classic, Foundations. We keep OEM cartridges in the workflow, not aftermarket lookalikes, because a cheap cartridge is the number one reason a shower starts creeping toward scalding again six months later. We’re background-checked, every eligible job gets permits pulled and inspections signed, and each completed job is backed by our 90-Day Done Right Promise in writing. Our technicians have up to 28 years of experience, and most days a Barrett is on-site. That’s the Beverly Hills service area we cover, ZIPs 90209, 90211, 90212, and 90213 included.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Delta Construction Problems We Solve in Beverly Hills

The failures we see here trace back to the housing stock and the water, not to any defect in the brand. A few we handle regularly:

  • Monitor valve cartridge wear in mineral-heavy water. The classic symptom is a shower that won’t hold temperature and creeps from warm to scalding on its own. Scale builds up until the pressure-balance cartridge can’t compensate. We test the valve and usually fix it with genuine OEM parts rather than a full replacement.
  • Aerator and cartridge scale in seldom-used guest baths. Large Beverly Hills estates have bathrooms that sit dormant for months, then dribble or seize on first use. Scale cements the cartridge and clogs the aerator. We clean and reseat, or replace when the internals are past saving.
  • Finish breakdown on older kitchen faucets. Chrome and stainless near sun-exposed windows pit and flake around the base and spout over time. It’s cosmetic until it isn’t – pitting at the base can trap moisture against the counter. We assess whether new trim resolves it or the faucet body is failing.
  • Supply-line and stop failures behind original cabinetry. A Delta faucet upgrade in a 1920s Spanish Colonial or Tudor often exposes corroded shutoffs and galvanized supply lines. These have to be corrected before the new fixture goes on, and in Beverly Hills that usually means it lands in the permit scope.
  • Valve body corrosion in long-vacant estate bathrooms. Where a home sat empty between owners, mineral deposits and galvanic corrosion can lock a valve body. We open the wall, inspect the rough-in, and tell you what actually needs replacing.

Delta Service in Beverly Hills: What Local Conditions Mean for Your Equipment

Here’s the local fact that changes how Delta work plays out in Beverly Hills: so much of the housing stock is on the city’s historic resources inventory that swapping a Delta shower valve or faucet during a bath remodel can trigger cultural heritage review. That means a fixture change is rarely a casual swap here. It gets specified and documented as part of the permit set, with the model, the finish, and the rough-in all accounted for before tile comes off the wall.

We see this constantly in homes above Sunset Boulevard in the canyons, where the hillside ordinance already limits grading and requires geological reports. Add preservation review on top, and a simple Delta Monitor cartridge replacement can ripple into a documented correction. A 1920s estate bath is the usual scene: a valve that’s crept toward scalding for years traces to a scaled pressure-balance cartridge, but opening the wall reveals galvanized supply lines and a corroded shutoff that the Beverly Hills remodel inspector will want corrected in the same permit. That’s the whole job, and it’s why we document before we touch a thing.

Delta Models & Products We Service in Beverly Hills

We cover the Delta lines you’re most likely to find in Beverly Hills homes: Trinsic widespread and single-handle lavatory faucets, Monitor 14 and 17 series tub/shower valves, Cassidy and Addison widespread faucets, and Classic and Foundations single-handle kitchen faucets.

For Monitor valves and current Delta faucets we fit genuine OEM cartridges and trim, because aftermarket parts are the leading cause of repeat temperature-creep callbacks. On discontinued models we tell you honestly when a rebuild makes sense and when matching trim and parts cost more than a clean replacement. We source parts per job to fit the model and finish – we don’t claim to stock Delta parts locally, so lead time on discontinued pieces can run a few extra days. We’d rather say that up front than promise a part we don’t have.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Delta Service Pricing in Beverly Hills

What drives the number on a Delta job here is scope, not the brand. A cartridge and seat replacement is a small job; a bath remodel that pulls a valve change into the permit set is a bigger one, and historic-preservation documentation adds time. Our free estimate lays it out line by line, with written change orders before any scope change touches the job, and every eligible job gets permits pulled and inspections signed.

Service Typical Range
Bathroom Remodel $9,000 – $28,000
Walk-In Shower Installation $4,500 – $12,000
Bathroom Vanity Installation $800 – $3,000
Tub-to-Shower Conversion $3,500 – $10,000

We offer no trip charge inside the county, $40 off any repair over $200, and a permanent 10% senior and veteran discount. Call (844) 560-4526 and we’ll walk you through the ranges for your home – estimates are free.

Serving Beverly Hills, CA – Our Local Coverage Area

We serve Beverly Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Delta Construction in Beverly Hills

Service Areas Near Beverly Hills

We serve Beverly Hills and the communities around it, including West Hollywood, Culver City, Glendale, Burbank, and View Park-Windsor Hills. Same permits, same written scope, same Delta parts approach in each. If you’re outside the ZIPs we listed, call and we’ll tell you straight whether we cover your address.

Book Your Delta Service in Beverly Hills Today

If a Delta faucet or valve is on your mind, call (844) 560-4526. We answer live, day or night. Same-day availability on smaller repairs is often possible; remodels get scheduled with a written scope and a clear timeline. Estimates are free, and the price you see is the price we write down.

Written by the team at Barrett & Sons Construction Glendale.

Need Construction help in Beverly Hills? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Beverly Hills

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch