Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Los Angeles, CA | Barrett & Sons Construction Glendale
We provide independent Unilock service across Los Angeles, from paver driveways in Mar Vista to retaining walls in the hills, and the one thing that separates our work here is that we spec every Unilock system against what’s actually under the ground, not what’s in the catalog photo. This city sits on some of the most complicated terrain in the country, and we build for it. Call (844) 560-4526 for a free estimate.
Barrett & Sons Construction Glendale is an independent Unilock provider. We’re not the manufacturer and we’re not an authorized dealer, which means our recommendations come from the site and the exposure, not from a sales quota.
Why Los Angeles Residents Choose Us for Unilock Service
We’ve worked with Unilock’s full line long enough to know which systems hold up where. Brussels Block and Brussels Dimensional pavers, Beacon Hill Flagstone, the U-Cara retaining wall system, Copthorne and Town Hall clay pavers – we’ve laid all of them and repaired plenty laid by somebody else.
That matters in Los Angeles because the site conditions here fight back. Marine-layer moisture on the Westside breaks down joint sand fast. Santa Ana heat cycles inland dry out and spall older pavers. Undocumented fill and old oil-field pads throw a bad base under a driveway that looked fine when it went in. We pull OEM-compatible joint sand, edge restraints and wall geogrid on a per-job basis rather than skimping with generic substitutes on structural parts, and we tell you plainly when repair beats replacement and when it doesn’t.
You can see the wider range of what we handle on our Unilock service page, but here in Los Angeles we spend most of our Unilock hours on driveways, patios and the base work that keeps them flat. Every eligible job gets permits pulled and inspections signed, and every price change gets a written change order before work moves.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Los Angeles
- Efflorescence bloom on gray concrete pavers. That whitish salt staining shows up most in coastal Westside neighborhoods where marine-layer moisture and irrigation splashback keep the surface wet. It’s cosmetic in most cases, but it signals a moisture problem worth diagnosing.
- Organic growth and joint-sand washout in shaded patios. The coastal marine layer keeps Unilock joints damp, so polymeric sand breaks down and weeds move in. We re-sand with proper OEM joint sand and fix the drainage that caused the washout.
- Paver settlement and heaving over undocumented fill. In the 90034 and 90066 corridor, pavers laid over old fill or oil-field pads sink, heave and turn into trip hazards. Ponds form where the base settled. The fix starts beneath the surface.
- Color fade and surface spalling on older pavers. Santa Ana heat cycling punishes Los Angeles pavers, especially where a sealer was applied too heavily or never reapplied. We assess whether the surface is worth saving or the field needs replacement.
- Failed edge restraint on driveways and wall courses. When edge restraint gives way, the whole field starts spreading. We reset restraint with the right proprietary or OEM-spec component rather than a generic substitute.
Unilock Service in Los Angeles: What Local Conditions Mean for Your Equipment
In the 90034 and 90066 ZIPs, a meaningful share of the bungalows and back patios sit over former bean fields and abandoned oil-drilling pads. That’s the local reality a generic Unilock page never mentions. When we excavate a paver base in Palms or Mar Vista, we routinely hit undocumented fill or an old well casing, and the job stops for a geotech review before any Unilock base can be compacted. That’s not a delay we invented to run up a bill; it’s Los Angeles telling you what your lot used to be. A base laid over that fill without a proper Class II compacted layer and geotextile separation fabric will settle, rock and pond within a few winters, no matter which catalog line went on top. We plan for the geotech review before we quote, so the written scope matches what the ground actually holds.
Unilock Models & Products We Service in Los Angeles
We work with Unilock Brussels Block and Brussels Dimensional pavers, Beacon Hill Flagstone, the U-Cara retaining wall system, and Copthorne and Town Hall clay pavers. For structural elements, like U-Cara wall geogrid and edge restraints, we source OEM or OEM-spec components per job because generic substitutes don’t carry the same load ratings. For cosmetic repairs we source joints and underlayments to spec as well. We don’t stock locally; parts are pulled for each Los Angeles job and delivered to the site.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Los Angeles
Unilock work in Los Angeles is priced by the site, not the catalog. Here are the ranges we quote:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $8,260 – $21,240 |
| Paver Patio Installation | $4,130 – $12,980 |
| Concrete Driveway Installation | $5,310 – $14,160 |
| Driveway Sealing | $295 – $825 |
What drives the cost: base depth and fill conditions, whether a geotech review is needed, drainage correction, wall height and geogrid on retaining work, and how much of the old field can be salvaged. A free estimate from us includes an on-site look at the base, a written line-item scope, and every allowance spelled out in writing before anything moves. Call (844) 560-4526 and we’ll set a time.
Serving Los Angeles, CA – Our Local Coverage Area
We serve Los Angeles and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Los Angeles
Yes, often. The 90034 and 90066 corridor sits over former bean fields and oil-field pads, so undocumented fill or abandoned well casings can force a geotech review before the base is compacted. Call (844) 560-4526 and we’ll walk the site with you.
That’s efflorescence, a salt bloom common in coastal Westside areas where marine-layer moisture and irrigation splashback keep pavers wet. It’s usually cosmetic and cleanable, but it’s worth a diagnosis to rule out a moisture or drainage cause. Call (844) 560-4526 for a free look.
Sometimes, but rarely in Los Angeles without assessment. The concrete has to be sound, properly sloped, and clear of settling or cracking, or the pavers inherit the same failure. We inspect before we quote either way.
Coastal Los Angeles needs a breathable sealer that handles marine moisture; inland needs one that stands up to Santa Ana heat cycling. Applying the wrong sealer or over-applying it drives spalling. We spec per site, not per brand sheet.
Above a certain height, yes, and Los Angeles hillside grading rules vary by neighborhood, so it pays to check. Every eligible job gets permits pulled and inspections signed. Call (844) 560-4526 for a free estimate.
Service Areas Near Los Angeles
We also serve Glendale, Burbank, West Hollywood, Beverly Hills and San Fernando, plus the unincorporated communities of View Park-Windsor Hills and Westmont. If you’re in or near the Los Angeles service area, we can usually set an estimate within the week.
Book Your Unilock Service in Los Angeles Today
Ready to fix that settling driveway or plan a new U-Cara wall? Call (844) 560-4526. A live person answers the phone, and we’ll be on site with a written estimate, allowances spelled out and OEM parts sourced for your job. Free second opinions on any written estimate too.
Written by the team at Barrett & Sons Construction Glendale.