A Barrett company - serving Glendale, CA

Dvele Construction in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Construction in Glendale, CA | Barrett & Sons Construction Glendale

We’re an independent Dvele builder working across Glendale, and the thing that separates our Dvele work here from anywhere else is fire-zone detailing. Much of Glendale sits in Very High Fire Hazard Severity Zones, so a Dvele shell in the Verdugo Mountains or San Rafael Hills has to meet Chapter 7A ignition-resistant requirements on siding, vents, roofing, and glazing even for a routine remodel. That changes how we open a panel seam, re-detail a roof-to-wall flashing, or tie a new kitchen wall into a closed envelope. We are not affiliated with, authorized by, or endorsed by Dvele. Call (844) 560-4526 for a free estimate.

Call (844) 560-4526

Key Takeaways

  • We’re an independent builder, not a Dvele dealer or factory representative.
  • Glendale’s fire-zone overlay means Chapter 7A detailing on Dvele remodels and additions.
  • Hillside permits here require as-built engineering verification before work begins.
  • Every scope change comes to you as a written change order first.
  • Our crew members have up to 28 years of experience.

Why Glendale Residents Choose Us for Dvele Service

Dvele builds a tight prefab shell – panelized walls, structural insulated panels, a closed envelope with integrated mechanical and HRV rough-ins. That assembly is efficient, but it doesn’t forgive sloppy detailing, and it doesn’t leave spare chase for the changes Glendale owners want to make. We’ve worked on Dvele’s Dvele One series, the Two and Two-Story lines, and custom panelized ADU packages long enough to know where those assemblies fight real conditions on a hillside lot.

We’re Barrett & Sons Construction Glendale, owner-operated since 1998, and Tom Barrett and his sons are on-site most days. We’re not a franchise dispatching strangers to your door. When a panel joint opens on a west-facing wall in Chevy Chase Canyon, we know which sealant, which flashing lap, and which fire-rated venting the assembly actually depends on. We use Dvele-specified or manufacturer-equivalent connectors and panel accessories where the shell depends on them, and quality aftermarket roofing and cladding that carries the required fire and Title 24 ratings everywhere else. Every eligible job gets permits pulled and inspections signed. Every price change arrives in writing before a nail moves. That’s the 90-Day Done Right Promise, written on every contract.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Dvele Construction Problems We Solve in Glendale

  • Panel joint and seam intrusion on south- and west-facing walls. Dvele’s panels leave little tolerance, so sealant joints and flashing laps are the first to fail. Glendale’s Santa Ana wind-driven rain and semi-arid UV cycling open those joints faster here than a conventional stucco wall would ever see.
  • Mechanical and electrical rough-in conflicts after a hillside deck or prior addition. When a Dvele shell gets a balcony or an old unpermitted addition bolted onto it, the closed envelope has no spare chase. Retrofits have to be planned carefully rather than cut blind.
  • Roof-to-wall transition failures where a panel roof meets a Chapter 7A assembly. Ember-resistant venting, Class A membrane, and panel edge detailing have to coordinate. Mismatched flashing here is a common leak and a common inspection failure in Glendale.
  • Fire-hardening gaps on Dvele homes in the Verdugo and San Rafael Hills. Original or substituted siding, decking, and vent products that don’t meet Chapter 7A get flagged at inspection, and this comes up on remodel work that would sail through in Burbank.
  • Undocumented deck and balcony tie-backs from decades past. On hillside streets off Glenoaks and in Chevy Chase Canyon, we routinely find non-engineered tie-backs. Glendale’s building department wants engineering before a permit issues, so this has to be resolved before anything else moves.

Dvele Service in Glendale: What Local Conditions Mean for Your Equipment

Here’s the fact that shapes every Dvele project in Glendale: because a large share of the city falls in Very High Fire Hazard Severity Zones within the Verdugos and the San Rafael Hills, a Dvele home here has to satisfy Chapter 7A ignition-resistant detailing on siding, vents, roofing, and glazing even for a remodel or an addition. That’s a step flatland neighbors like Burbank and Pasadena usually never trigger. It matters directly for Dvele owners because the shell is a closed assembly – you can’t swap in a non-compliant vent or a substituted siding panel without the inspector catching it, and the panel edge detailing has to line up with the Class A membrane from the start. On top of that, Glendale’s building department requires as-built engineering verification on hillside properties before issuing permits. So when we touch a Dvele shell on a steep lot above Glenoaks, the documentation comes first, then the detailing.

Dvele Models & Products We Service in Glendale

We work across Dvele’s residential lines: the Dvele One series modular and panelized single-family homes, the Dvele Two and Two-Story series, custom panelized ADU and guest-house packages, and the high-performance envelope packages with integrated mechanical and HRV rough-ins. We don’t claim any local stock of Dvele parts – none of us do. When a job depends on a Dvele-specified connector, sealant, or panel accessory, we source it to the assembly’s requirements. For generic hardware, roofing, and cladding, we use quality aftermarket products that carry the fire and Title 24 ratings your Glendale permit requires. That approach keeps the shell’s integrity intact while keeping the schedule honest.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Dvele Service Pricing in Glendale

Our published Glendale ranges for the work most Dvele owners need:

Service Typical Range
Roof Repair $400 – $1800
Roof Replacement $8000 – $20000
Bathroom Remodel $9000 – $28000
Kitchen Remodel $14000 – $45000
Home Addition $45000 – $130000

What drives the number: fire-zone compliant materials, hillside access and staging, as-built engineering documentation where Glendale requires it, and how much of the envelope has to be opened to reach the failing detail. A free estimate includes a written scope, written allowances, and a look at the seam or flashing before anyone commits to a number. If the price changes once work starts, it changes in writing first – the allowance that isn’t on paper is a surprise waiting for a date. Call (844) 560-4526 to schedule yours.

Serving Glendale, CA – Our Local Coverage Area

We serve Glendale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Dvele Construction in Glendale

Service Areas Near Glendale

We work Dvele shells across the Glendale service area and into neighboring towns – Burbank, West Hollywood, Beverly Hills, and San Fernando. See our Dvele service page for the model lines we handle. If you’re outside Glendale proper, we also cover Burbank and Los Angeles for Dvele envelope and roof work.

Book Your Dvele Service in Glendale Today

Whether it’s a leaking panel seam, a Chapter 7A retrofit, or a full kitchen remodel inside a Dvele shell, we’ll come out, open the detail, and give you a written scope with written allowances before anyone touches a nail. Call (844) 560-4526 for a free estimate. A live person answers 24/7. We also honor $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.

Written by the team at Barrett & Sons Construction Glendale.

Need Construction help in Glendale? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch