A Barrett company - serving Glendale, CA

KraftMaid Roofing in Glendale, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Roofing: The Glendale Owner’s Guide

Replacing roofing on a KraftMaid home in Glendale typically runs $8,000 – $20,000 for a full roof and $400 – $1,800 for a targeted repair, and the work is scheduled, not same-day, because it’s planned construction. Roofs in Glendale don’t fail overnight. They fail at the seams, the flashings, and the fasteners first, and the way most owners find out is a brown ring on the ceiling after the first real rain of the season, or a shingle grit trail in the gutter that wasn’t there last spring. That’s the moment the phone gets picked up.

Call (844) 560-4526

Key Takeaways

  • KraftMaid homes carry the same roofing assemblies as any other house of the same era. The brand never specified a proprietary roof, so the parts question is a matter of matching what’s actually up there.
  • Glendale roofs take hard afternoon sun through summer and get the full load of the seasonal rain cycle in winter. That seesaw is what kills flashings and sealant.
  • Every eligible job includes permits pulled and inspections signed. The permit inspector works for you, not for us, and that’s exactly why we like him.

Which KraftMaid Models This Applies To

KraftMaid builds cabinetry and vanities, not roofing. That’s the first thing to get straight, and we’d rather say it plainly than let you chase a parts number that was never made. When a homeowner in Glendale calls us about “KraftMaid roofing,” what they own is a KraftMaid-outfitted house (kitchens, baths, laundry rooms) whose roof deck, underlayment, and covering were installed to standard California residential practice, not to a cabinet maker’s spec. So the part you’re replacing is a roofing component like any other.

The compatibility step is real, though. Identify what’s up there before you shop:

  • Look at the shingle edges and starter course first. Pull a photo of a full shingle tab at the eave and the manufacturer’s name is usually cut into the seal strip. GAF and CertainTeed both stamp their products.
  • Measure the exposure. Standard architectural shingles run a 5-inch to 5½-inch exposure; three-tab runs about 5 inches. A tape measure on a dry day tells you more than any label.
  • Check the underlayment type. A synthetic felt (usually gray, woven look) versus old asphalt felt (black, papery) changes what a proper repair needs underneath.
  • Flashings and pipe boots vary in diameter by vent stack. Measure the boot collar, not the pipe, before ordering.

The OEM-versus-aftermarket call matters less here than in cabinets. A GAF or CertainTeed shingle that matches profile, exposure, and color is the right part, full stop. We install GAF and CertainTeed on roofs because they’re materials you can look up, not mystery brands off a van. We don’t stock parts and we don’t carry roofing on a truck. We source to the job.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Roofing Is Failing

The symptoms below are what we actually see on Glendale houses. Each one points to a specific cause, and knowing the cause is what keeps a $500 repair from becoming a $14,000 roof.

  • Curling or cupping shingles on the south-facing slope. That slope takes the most sun. Asphalt dries and shrinks, the tabs lift, and wind gets under them. Once tab corners curl, the shingle has lost its seal and patch work buys months, not years.
  • Granule trails in the gutter or at the downspout splash. Shingles shed grit as they age; that’s normal at a slow rate. A visible accumulation each season means the mat is breaking down and the shingle is near end of life. In Glendale’s heat, a 25-year shingle often gives you 18 to 20 honest years.
  • Dark staining or algae streaks on the north slope. Glenoaks and Verdugo-area roofs show this often. It’s usually gloeocapsa magma, a common algae, and it’s cosmetic until it isn’t. It traps moisture and speeds the breakdown of the sealant strip.
  • Rust or lifting at pipe boots and flashings. This is the number one leak source we fix on Glendale roofs. Rubber boots crack at the heat-and-rain cycle; metal flashings pull at the fasteners. A $400 – $900 repair here prevents a four-figure drywall bill.
  • Ceiling stains, sagging sheathing, or daylight in the attic. Moisture is already inside. Stop reading and get eyes on it, because a small roof leak travels fast along decking before it shows as a stain.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Glendale homes, the numbers below reflect what the parts, labor, and disposal actually run. These are installed ranges, not teaser prices.

Work Installed Range
Roof repair (flashing, boots, small sections) $400 – $1,800
Tile roof repair $600 – $2,500
Full roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the range: roof size and pitch, how many layers are being torn off, whether the sheathing is sound, and the covering you choose. Repair versus replace is often a question of how much slope is failing, not how old the roof is. A single failed pipe boot is a repair all day. Curled shingles across two slopes on a 20-year-old roof is a conversation. Our pricing is no-hassle upfront and in writing, and any change to scope arrives as a written change order before a nail moves. Every job is backed by the 90-Day Done Right Promise.

DIY or Call Us?

Some of this you can check yourself safely. Walk the gutters from a ladder you’ve footed on level ground, look at the shingles from the ground with binoculars, photograph the attic sheathing at the ceiling plane, and confirm the leak is where you think it is. That’s smart.

What we’d steer you away from is climbing the roof to patch it yourself. Falling is the leading injury on residential roof work, and once you’re up there, a bad seal on a flashing is worse than no seal because it looks fixed from the ground. Any work that involves lifting shingles, re-flashing a pipe boot, or replacing decking belongs to someone trained for it. We’d rather you call and be safe than save a few hundred and end up at urgent care. Barrett & Sons Construction Glendale is an independent service provider, not affiliated with KraftMaid. Calls are answered by a live person 24/7 at (844) 560-4526.

FAQs

How long does a roof last in Glendale? A typical asphalt shingle roof lasts 18 – 22 years in Glendale, shorter than the 25-year rating because of sun exposure and the seasonal heat-and-rain cycle. Mature shingles curl and shed granules near the end, and repairs start costing more than they save. Call (844) 560-4526 for a free estimate on repair or replacement.

Can a failing roof be repaired instead of replaced? Yes, if the failure is localized to flashings, pipe boots, or a small section rather than widespread shingle breakdown. We inspect before we recommend, and a $400 – $1,800 repair often buys years. If two or more slopes are curling, replacement is the honest answer. Call (844) 560-4526 for a free second opinion on any written estimate.

How long does a roof replacement take? A typical Glendale single-family roof takes two to four days, depending on size, pitch, and how many layers are being torn off. Permits are pulled and inspections signed, which adds a scheduling step, not usually a delay. Call (844) 560-4526 to schedule your free estimate.

How do you source the part? We match the shingle profile, exposure, and color to what’s already on your roof, or supply a full covering in GAF or CertainTeed for a replacement. We don’t stock parts and we don’t carry roofing on a truck, so we source to your job and tell you the manufacturer up front. Call (844) 560-4526 to get started.

If you’re standing in a Glendale kitchen looking at a water stain and aren’t sure what’s above it, that’s exactly the call we want. Ask anyone on your street, or look up the license number yourself before you sign anything. We also work with Cambria, Silestone, and Kohler on the interiors side, so a roof question doesn’t have to be a separate phone call. Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate, and we’ll put the scope in writing.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch