A Barrett company - serving Glendale, CA

KraftMaid Fence Installation in Glendale, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Fence Installation: The Glendale Owner’s Guide

KraftMaid fence installation in Glendale runs $3,500 – $9,000 installed, depending on lineal footage, material, and grade changes on your lot. KraftMaid builds its fence systems to tight tolerances, so a failing post, gate hinge, or panel is usually a fitting problem, not a materials problem. Most Glendale owners notice it the same way: a gate that drags on the Chevy Chase Canyon side yard after a wet winter, or a panel that pulls loose from its post along a slope in Glenoaks. If the fence is holding but the hardware, posts, or gates aren’t, we match the correct KraftMaid-compatible part and set it right.

Call (844) 560-4526

Which KraftMaid Models This Applies To

KraftMaid fence lines vary by width and height sizing, rail spacing, and gate hardware series, so the part has to match the model, not just the look. Before we quote anything, we read the label on the inside face of a rail or the top cap – KraftMaid runs a model sticker and a series code there – and we measure post centers and rail thickness with a tape, because a part that’s a quarter-inch off won’t sit flush.

Here’s the OEM-versus-aftermarket call we make with Glendale owners. For gate hinges, latches, and post caps tied to a specific KraftMaid series, the OEM part is the safe move: an aftermarket hinge with different screw spacing means drilling new holes, and on a post that’s already weathered, that’s how cracks start. For panels and pickets, a quality aftermarket equivalent that matches the rail profile is often the smarter buy, and we’ll tell you when it is. KraftMaid compatibility isn’t about brand loyalty – it’s about whether the part fits the rail spacing and post size you already have.

If your fence shares a wall with cabinetry work, we also handle Cambria, Silestone, and Kohler in the same visit. We’re an independent contractor and not affiliated with KraftMaid; we install and source what fits your model.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Fence Installation Is Failing

A gate that sags and drags the ground is a hinge or post-settlement problem, not a latch problem – the hinge is worn or the post has shifted. Tightening the latch never fixes it.

  • Posts leaning after wet weather. Glendale’s clay-heavy soil swells in the rainy season and shrinks in summer, and a post set shallow rocks loose over time. Your soil, not your fence brand, is the culprit.
  • Rails pulling away from posts. Failed fasteners or rusted brackets let a rail walk out of its mortise. Left alone, the panel drops and the post takes the load it wasn’t built for.
  • Gate hinges grinding or squealing. Grit and worn hinge pins are the usual cause. On an exterior KraftMaid gate, the hinge takes the brunt of every swing.
  • Panel racking on a slope. Glendale lots step up toward the Verdugo foothills, so a square panel forced onto sloped ground twists and loosens. You’ll see daylight through the joints.
  • Soft or splintered wood at the base. Ground contact holds moisture; over years the wood softens below grade. Once the base goes soft, no part swap saves the post.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Most KraftMaid fence work we do in Glendale lands between $3,500 and $9,000 installed. That’s parts plus labor, written line-item before we start. What moves the number: lineal footage, how many posts need resetting versus just new hardware, whether the ground is level or stepped, and whether you need a picket-only repair or a full panel.

  • Hardware-only fix – hinges, latches, brackets, fasteners: small and quick.
  • Post reset or replacement – concrete work and soil handling drive this up.
  • Full fence installation – at the $3,500 – $9,000 range depending on footage and material.

Every price change arrives as a written change order before we touch the job. Every eligible job gets permits pulled and inspections signed, because the permit inspector works for you. The work is backed by the 90-Day Done Right Promise – if it isn’t right, one call brings Tom back.

DIY or Call Us?

You can safely inspect a lot of this yourself. Run your hand along the rail-post joints, check for movement, look for rust at the fasteners, and watch the gate swing to see where it catches. Reading the KraftMaid model label and taking a few measurements saves us both time.

Where DIY goes wrong is at the post and gate. Re-hanging a heavy gate on a weathered post, or digging and resetting a post to the right depth in Glendale clay, is where a weekend project turns into a broken gate and a leaning fence. A gate that swings on a bad hinge is heavy, and it’s easy to get hurt. If the rail is pulling or the post is loose, that’s the point to stop and call – we’ll tell you honestly whether it needs a part or a reset.

Call (844) 560-4526 for a free estimate, and we’ll bring a second look at whatever estimate you already have.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch