Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Glendale Owner’s Guide
Replacing or upgrading a Wellborn kitchen component in Glendale typically runs $14,000 – $45,000 installed for a full remodel, with single-item work like a cabinet run or island landing far lower, and we schedule these as planned projects rather than same-day drop-ins. Most Glendale owners discover the failure the same way: a soft-close door that no longer catches, a box that sags at the corner, or a finish that has gone chalky along the sun-facing wall of a 1920s bungalow near Adams Square. You notice it once, then you can’t stop noticing it.
Which Wellborn Models This Applies To
Wellborn Cabinet builds across several product lines, and the part you need depends on which one is in your kitchen. The entry and mid lines use different box construction and hinge boring patterns than the premium lines, and the door style name printed on the original order sheet matters as much as the cabinet width. Before you buy anything, open a door and look for the label stapled inside the box or on the back panel; failing that, measure the box depth, the door overlay, and the hinge cup bore (the standard is 35mm, but older and imported hardware drifts from it).
On the OEM-versus-aftermarket question for Wellborn specifically: genuine Wellborn doors, drawer fronts, and matching end panels are worth the wait when you need a color and grain match on a visible run, because the factory finish is a catalyzed conversion varnish you won’t replicate with a brush-on product. For concealed hinges, drawer glides, shelf clips, and toe-kick, a quality aftermarket equivalent from a known hardware maker is often the better buy and installs faster. We are an independent Glendale service provider and are not affiliated with Wellborn; we source the correct part for your line rather than pushing whatever is closest to hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Kitchen Remodeling Is Failing
Here’s what actually goes wrong first, and why:
- Doors that swing past their stop or won’t stay shut. The hinge spring or the cup screws have given out, usually after a decade of daily use in a busy household. Replacing the hinge pair is often all it takes.
- Drawers that drag or tip when pulled. The glide has worn its track, or the box corner has separated from the front. A dragging drawer on a loaded cutlery or pot drawer accelerates the wear.
- Finish checking or fading on the sun side. Glendale’s inland heat and strong afternoon light through east and south windows bake the finish on exposed door faces faster than in coastal kitchens.
- Sagging or soft spots in the box bottom. Past leaks under the sink or a slow drip from the dishwasher supply soften the panel over time. Fix the leak source before replacing the part, or you’ll be back.
- Loose or cracked toe-kick and end panels. Seasonal expansion in an older Glendale house with no climate control in the kitchen moves the joints.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for the work this page covers in Glendale:
| Project | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: how many boxes and fronts are involved, whether the layout changes, whether the countertop has to come out to replace a base run, and whether you’re matching an existing finish or refacing the whole face. Parts cost is quoted separately from labor so you can see both line items. Every price change comes to you as a written change order before we touch the job, and the finished work is covered by our written 90-Day Done Right Promise. Find a concealed hinge or glide spec printed inside a door and it may read 110° or 170° opening angle and a specific cup bore; either number is also worth repeating to our scheduler so we can pull the correct equivalent.
DIY or Call Us?
Some of this is genuinely within reach for a careful homeowner: tightening a loose hinge screw with a wooden matchstick in the hole, swapping a shelf clip, or replacing a worn glide on a standard side-mount drawer. Where it goes wrong is on a door or drawer front that has to match a finish and a bore pattern exactly, and on any cabinet run that involves the countertop, plumbing, or electrical. Making that call wrong once costs more than the part. Our technicians have up to 28 years of experience and will tell you honestly whether a simple repair gets you another five years or whether the box is finished. Call (844) 560-4526 to talk it through; a live person answers around the clock.
FAQs
Plan on roughly 10 to 15 years for hinges and glides under daily household use, and 15 to 20 years for the box and door finish when the kitchen isn’t baking in direct afternoon sun. Glendale kitchens on the warmer, sun-facing side of a house tend to hit the low end of those ranges.
Often yes. A hinge, glide, shelf clip, or toe-kick is a straightforward swap, and a box corner that’s separating can sometimes be re-fastened and glued. A water-swollen panel or a door whose finish has failed over a large area usually can’t be repaired to a match, and replacing is the honest answer. Call (844) 560-4526 and we’ll tell you which one you’re looking at, free.
A single door, drawer, or glide is a short visit. A full cabinet run or a component tied to the countertop is a planned project we schedule once the correct part is in hand. We’ll give you a realistic window when we see the kitchen.
From the label inside your cabinet, the door style name, and the measurements taken on site, matched to your specific Wellborn line and the equivalent hardware maker for concealed hinges and glides. We don’t carry a parts store and don’t pretend to; we confirm the correct spec before ordering. Call (844) 560-4526 for a free estimate. We also work with KraftMaid, Cambria, and Silestone when the job calls for them.
If your Wellborn kitchen has a failing part and you want a straight answer on repair versus replace, call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. A live person answers 24/7, every eligible job gets its permits pulled and inspections signed, and the work is backed by our written 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.