Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Glendale Owner’s Guide
We install Wellborn driveway and paver systems across Glendale, with installed pricing that runs from $7,000 – $18,000 for a full paver driveway and $3,500 – $11,000 for a paver patio, depending on square footage, base prep, and pattern. We’re an independent contractor and not affiliated with Wellborn, so we quote the material on its own merits. Most Glendale owners discover a problem the same way: a paver heaves after a wet winter, a joint line sinks a half inch, or a driveway apron cracks where the truck turns in off a steep street. Once water gets under the base, the failure spreads fast.
Which Wellborn Models This Applies To
Wellborn’s hardscape line covers several paver series with different thicknesses and edge profiles, and the thickness is what decides whether a replacement paver will sit flush with the existing field. Standard driveway pavers run about 2 3/8 inches thick, while some patio and walkway lines sit closer to 1 5/8 inches; swapping one for the other leaves a lip you’ll catch a tire on. The first thing we do on any Glendale paver job is measure a pulled paver with a caliper and match the series by thickness, face dimension, and chamfer, not by color alone, because two series can look identical in a photo and won’t lock together. If the paver carries a stamp or a casting mark on the underside, we match against that. Where Wellborn’s exact series is discontinued, we source a matching-thickness equivalent rather than force an ill-fitting piece; the base and bedding course matter more to the finished result than a perfect color match. You get two honest choices, an OEM match when the series is still available or a quality aftermarket equivalent sized to your field, and the tradeoff in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Driveway & Pavers Is Failing
- Heaving or rocking pavers. One or two pavers lifting out of plane usually means water is trapped in the base and freezing or swelling under them, and the whole panel needs re-bedding, not just the loose stone.
- Sunken joint lines or a wavy field. When the base wasn’t compacted in lifts during the original install, the pavers settle unevenly, and Glendale’s clay-heavy soil holds water against that soft spot until it gives.
- Cracked pavers along the driveway apron. Vehicle turning loads concentrate at the apron and the first course, and thin pavers or a missing edge restraint crack right there.
- Sand washing out of the joints. Polymer sand that never set, or a slope that drains toward the house, lets joint sand escape with every rain and opens the field to weeds and water.
- Efflorescence or white haze that keeps returning. Mineral salts pulled to the surface by moisture under the pavers signal a drainage problem beneath, so cleaning the face won’t fix it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Price in Glendale depends on square footage, how much base has to come out, and whether the failure is localized or the whole field. Here’s what we install:
| Job | Installed range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement | $5,000 – $14,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway sealing | $250 – $700 |
What drives the number is excavation depth, base stone, edge restraint, and the paver series you choose. Parts and labor are quoted separately and line by line, and any change in scope arrives as a written change order before we touch the job, never a surprise invoice at the end. We pull permits where the work requires it and sign off on inspections. Every completed job carries the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely pull one loose paver, measure it, check for water pooling on the surface, and photograph the joint lines. That’s useful information and it costs nothing. What goes wrong with DIY here is the base: homeowners reset a paver on new sand without fixing the compacted stone underneath, and the same spot fails again within a season. A proper repair means lifting the affected panel, re-grading, re-compacting in lifts, and re-setting the edge restraint, which is heavy work with the right plate compactor and a real workout with a hand tamper. There’s no spring tension or live electrical here, so it’s not dangerous the way a garage door is, but doing it half right wastes your weekend and your money. Call (844) 560-4526 and we’ll give you a free second opinion on any written estimate before you commit.
FAQs
A well-installed paver driveway in Glendale lasts 25 to 30 years or more, but the pavers themselves will outlast the base holding them up. In our climate the paver is rarely the failure; the compacted base and how water drains off the slope is what decides lifespan, which is why we focus there on every job. Call (844) 560-4526 for a free estimate and we’ll tell you honestly what your field needs.
Yes, a localized failure can usually be repaired, lifting only the affected panel and re-bedding it on corrected base instead of replacing the whole field. If the failure runs in long lines or the base underneath is soft across the drive, a partial repair will just chase the problem. We’ll tell you which one you’re looking at before any work starts. Call (844) 560-4526 for an exact quote, and estimates are free.
A localized repair takes about a day, while a full driveway replacement typically runs several days depending on square footage and base depth. Weather and drying time between lifts add to that in the wetter months. Call (844) 560-4526 to schedule your free estimate and we’ll map out a realistic timeline for your Glendale property.
We identify the series by measuring thickness, face size, and chamfer, then match to your existing field, using an OEM paver when the line is available or a matching-thickness equivalent when it isn’t. We don’t stock parts or carry pavers on a truck, so materials are ordered to the job after we’ve confirmed the match with you. Call (844) 560-4526 for a free estimate and a written line-item quote.
We also work with KraftMaid, Cambria, and Silestone across the homes we serve, so if your project touches more than the driveway, ask us while we’re out. Our crew members have up to 28 years of experience, every price change comes in writing before work moves, and a live person answers the phone around the clock at (844) 560-4526. Call Barrett & Sons Construction Glendale for your free estimate, and let’s get your driveway back to solid. Ask anyone on your street, or look up the license number yourself.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.