Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Home Additions & ADU: The Glendale Owner’s Guide
We build and finish Wellborn-spec home additions and ADUs in Glendale, and an installed project here typically runs $45,000 – $130,000 depending on square footage, foundation work, and whether you’re adding a full ADU ($90,000 – $220,000). We’re an independent contractor and not affiliated with Wellborn, so we install to their cabinet and millwork specs without steering you toward anything else. Most Glendale owners find us mid-project: the framing passed inspection, then the Wellborn cabinet line was discontinued, or a box arrived with the wrong door profile, and the job stalled. That’s the call we answer.
Which Wellborn Models This Applies To
Wellborn’s residential lines split broadly into their all-plywood and their value-series boxes, and the hinge and drawer glide pattern changes between them. This is the compatibility gotcha that stalls additions: a replacement cabinet or door from a different year will physically fit the opening but won’t line up with the existing hinge bore pattern, which means you’re re-drilling or swapping the whole run instead of one face. Before we order anything, we read the label inside the cabinet door or drawer box (series code, door style name, finish code) and measure the box depth and hinge cup spacing. Wellborn uses a 32mm system on most lines, but we verify rather than assume.
OEM replacement is the right call when you’re matching a discontinued finish or a specific door profile, because the color match is exact. Quality aftermarket doors and glides work fine on interior, non-visible runs and cost less. We don’t stock parts and we don’t carry them on a truck. We source to the label you give us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Wellborn Home Additions & ADU Is Failing
In a new addition or ADU, the “part” is usually the cabinet run, the door set, or the millwork package, and Glendale’s climate tells on it faster than people expect. What we see:
- Doors that won’t stay closed or rub the frame. The hinge plate has loosened from the box face, usually from the seasonal swell of an unvented addition. Left alone, the screw holes strip and the door drops.
- Drawer glide grinding or skipping. The glide has lost its ball bearings or the track is out of parallel. This shows up within a season in ADUs where the interior humidity swings.
- Finish peeling or crazing at the door edges. Glendale’s dry summers and occasional Santa Ana heat pull moisture out of the substrate and stress the edge banding. Once it lifts, moisture gets underneath.
- Cabinet boxes separating at the joints. The screws or dowels have worked loose from seasonal movement. A gapping seam lets the box rack, and every door on that run misaligns.
- Squeaks and deflection underfoot in the new floor. Subfloor fasteners or the joist hangers in the addition have backed off. Under an ADU floor, this is a structural warning, not a cosmetic one.
Two of those five (the cabinet box joints and the floor deflection) get worse in a hurry and are worth looking at before anything else.
Replacement Cost & What’s Included
For home additions and ADUs in Glendale, the honest number is the project range, not a single part. Pricing we quote:
| Scope | Typical installed range |
|---|---|
| Home addition (full job) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Cabinet installation (Wellborn run) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
What drives the range: square footage, foundation and site conditions, whether the addition needs its own utility run, and the finish level of the Wellborn package. Parts and labor are broken out on the written quote in a separate line for the part. Every scope and price change arrives as a written change order before work happens. Every eligible job gets permits pulled and inspections signed, and every completed job is backed by our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Reading a label, measuring box depth and hinge spacing, and checking whether a door or glide is the culprit are all things you can do safely. Tightening a loose hinge or swapping a single glide in an existing cabinet is fine. Where DIY goes wrong on an addition or ADU: cabinet boxes separating at the joints, a loosened subfloor, or a structural deflection underfoot. Those need to be opened up and inspected. The work isn’t dangerous the way gas or electrical is, but a floor that’s still moving under a new ADU is a load problem, and tightening a screw won’t fix it. If the box is racking or the floor deflects, stop and get eyes on it. Call (844) 560-4526 and we’ll tell you what we’d do.
FAQs
Ten to fifteen years on most Wellborn lines when the room is vented and the humidity stays steady, and noticeably shorter in a new ADU that runs humid because the exhaust is undersized. Glendale’s dry heat shortens the life of edge finishes; the hinges and glides are the first to go. Call (844) 560-4526 if you’re past the ten-year mark and things feel loose.
Often yes. A loosened hinge, a single bad glide, or a lifting finish edge can be repaired at a fraction of a swap, and we’ll tell you honestly when repair is the smarter call. A cabinet box that’s separated at the joints or a subfloor that deflects should be replaced, not patched. Call (844) 560-4526 for a free estimate on either path.
A single glide or hinge is a short visit; a full Wellborn cabinet run in an addition is a multi-day job depending on parts lead time. Because we source to your label and don’t stock parts, the timeline starts with the order, not the visit. Call (844) 560-4526 and we’ll give you a realistic window.
We order against the series code and finish code from the label inside the door or drawer box, then confirm the 32mm bore pattern before it ships. If Wellborn discontinued the line, we’ll match the closest current door style and tell you the color difference up front. Call (844) 560-4526 with the label code and we’ll get you a quote. We install KraftMaid, Cambria, and Silestone on other jobs too, but for Wellborn we work to your existing spec.
Get a Free Estimate From a Contractor You Can Verify
Barrett & Sons Construction has been owner-operated since 1998, and a live person answers the phone day or night. Tom Barrett publishes his name, address, and license number so you can look it up before you sign anything. Every price change is written before it touches the job, every eligible job gets permits pulled, and there’s no trip charge inside the county. Call (844) 560-4526 for a free estimate on your Wellborn home addition or ADU in Glendale.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.