A Barrett company - serving Glendale, CA
K

Kohler Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Kitchen Remodeling: The Glendale Owner’s Guide

Kohler kitchen remodeling in Glendale runs $14,000 – $45,000 installed, and small kitchens land between $9,000 and $20,000. We work with Kohler fixtures and fittings (our technicians have up to 28 years of experience) as part of full kitchen jobs, and estimates are free on every one. What usually brings a Glendale homeowner to this page isn’t a whole-kitchen dream, though. It’s one failed piece: a Kohler faucet that drips from the base, a soap dispenser that won’t hold, a sink that’s chipped at the rim, or a grab bar or pot filler that’s loosened itself from the wall. We install, replace, and match Kohler components across Glendale kitchens daily.

Call (844) 560-4526

Which Kohler Models This Applies To

Kohler is a broad brand, and the part that fits one line won’t fit another. The kitchen fixtures we handle most often in Glendale are the Bellera, Forte, Malleco, and Graze faucet lines; the ProMotion and Bellera pulldown sprays; the Cairn and Whitehaven undermount sinks (Whitehaven is enameled cast iron, a different animal from the stainless lines); and the Crue and Bellera soap dispensers. Kohler faucets also carry Kohler ceramic disc valves in most current models, and that’s where a lot of the leaking begins.

Here’s the compatibility gotcha most owners don’t know: Kohler pulldown spray heads are not interchangeable between generations. A first-gen ProMotion spray head won’t seat in a second-gen ProMotion body, and the giveaway is the connector type at the hose end (hose-end thread vs. spray-head thread). The Kohler part label, usually inside the faucet base or on the underside of the deck plate, gives you the model line and year. Read that before you order anything.

OEM vs. aftermarket for Kohler: OEM is the safe call on ceramic cartridges and spray heads because the seating and threading are exact. Quality aftermarket is fine on braided supply lines, tailpieces, and drain assemblies. We’ll tell you which side of that line each part belongs on during your estimate.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Kohler Kitchen Remodeling Is Failing

Glendale kitchens take a specific beating. We’re at the east end of the Santa Monica Mountains, so our water is hard (averaging 10 – 15 grains per gallon out of the tap), and the heat and dust that come through the Verdugo corridor between June and October wear on exposed fixtures faster than you’d expect. Here are the signals we see most:

  • Drip from the spout or base when the handle’s off. That’s usually a failed Kohler ceramic disc cartridge – the ceramic plates score with mineral buildup and stop sealing. In Glendale we see this fail on hard-water homes inside 6 – 9 years.
  • Water pooling at the base of the faucet or on the deck plate. The O-ring under the faucet has dried and cracked, or the base sealant has separated. Left alone, that trickle runs into the sink cutout and rots the cabinet floor beneath it.
  • Pulldown spray sticking, sputtering, or losing pressure. Sediment and scale have clogged the aerator screen or the internal check valve. On the ProMotion line, that’s often fixable with a new aerator; on the older lines, the spray head itself is the culprit.
  • Sink rim chipped, cracked, or stained past cleaning. Enameled cast iron (Whitehaven) chipping at the rim is a casting failure and won’t seal again. Stainless (Cairn and others) with a deep dent or a bad ridge weld is the same story.
  • Pot filler or soap dispenser that’s loosened at the wall or deck. The mounting bracket behind the wall has pulled from the drywall or the deck-mount base has stripped. This is a small repair, but the leak behind it can wander into the wall cavity before you notice.

Replacement Cost & What’s Included

Kohler fixture replacement as part of kitchen work in Glendale breaks down roughly like this:

Item Installed Range (Glendale)
Full kitchen remodel (with Kohler fixtures) $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the price: whether the sink cutout has to be enlarged or recut, whether wall access is needed behind a pot filler, and whether the job is a straight swap or a broader remodel with new countertops and cabinets around it. Every part and every allowance goes on the written estimate before we touch anything. If a found condition (rotted cabinet floor, hidden leak) changes scope, you get a written change order before work continues. Every completed job is backed by our 90-Day Done Right Promise.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some of this is genuinely owner-safe. Replacing an aerator, swapping a soap dispenser bottle, or pulling a spray head and re-seating it are all reasonable DIY. What isn’t: pulling a cartridge out of a Kohler ceramic disc valve under the sink while water’s live, or trying to fix a pot filler that’s loosened behind the wall. Under-sink shutoffs in older Glendale homes (many of ours date from the 1950s and 60s) seize or fail when you turn them, and that turns a $30 part into an emergency flood in a finished cabinet.

If you’re not sure whether the shutoff will turn, don’t find out at 6 p.m. on a Sunday. Call (844) 560-4526 and we’ll be honest about whether it’s a same-day small job or a scheduled visit. No trip charge inside the county, and we’ll take $40 off any repair over $200.

FAQs

Ready for a Straight Answer on Your Kohler Kitchen?

Every Kohler job in Glendale starts with a free estimate, a written line-item scope, and a conversation about what fails and why. Call (844) 560-4526 to schedule yours. You’ll see the price before we start, and if something changes on the job, you’ll see it in writing before the next nail moves.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch