A Barrett company - serving Glendale, CA

American Standard Kitchen Remodeling in Glendale, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

American Standard Kitchen Remodeling: The Glendale Owner’s Guide

American Standard kitchen remodeling in Glendale runs $14,000 – $45,000 for a full kitchen, with a small kitchen remodel landing at $9,000 – $20,000. That range covers American Standard fixtures, cabinets, counters, and labor, with the scope and every allowance written on paper before work starts. Most Glendale owners don’t shop this page until a part fails, a finish stops matching what they can still order, or a bearing guide on a drawer slides rough and they realize the whole kitchen has aged out at once.

Call (844) 560-4526

Key Takeaways

  • Full American Standard kitchen remodel in Glendale: $14,000 – $45,000. Small kitchen: $9,000 – $20,000.
  • We’re an independent Glendale contractor, not affiliated with American Standard. We install and match the brand.
  • Every price change arrives as a written change order before the work happens.
  • Permits pulled and inspections signed on every eligible job.
  • 90-Day Done Right Promise on every remodeling job, in writing on the contract.

Which American Standard Models This Applies To

American Standard is best known for plumbing fixtures, but the brand also touches kitchen work through faucets, sinks, and the cabinets and finishes that have to line up around them. The realistic compatibility gotcha is this: American Standard faucet models have been quietly retired and renumbered across decades, and the mounting-hole spacing and supply-line fitting on a new model won’t always match the old one without an adapter or a plate change. Pull the model number off the tag under the sink or on the faucet body, measure your existing hole spacing (8-inch centers on a widespread versus a single-hole deck), and bring both numbers to the quote.

On the OEM-versus-aftermarket call: for faucets and valves, stick with the American Standard part or a known equivalent, because a cheap offshore cartridge can leak again in a year and the trim won’t index right. For cabinet hardware, drawer glides, and hinges, quality aftermarket equivalents are fine and often cheaper. We write down which is which before ordering. We’re an independent Glendale contractor and not affiliated with American Standard. Other brands we also work with include KraftMaid, Cambria, and Silestone.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your American Standard Kitchen Remodeling Is Failing

  • Dripping or weeping at the faucet base. A worn cartridge or O-ring, usually the first thing to go on an older American Standard faucet, and it lets water creep under the deck. Two decades in a dry Glendale cabinet is enough to do it.
  • The faucet handle travels too far or doesn’t shut off clean. The cartridge seat has scored. That’s a cartridge swap, not a whole faucet, but the model has to match.
  • Drawers that stick or pull crooked. Tolerance buildup in the box, or a failed glide. In a kitchen pushing 20-plus years, this usually signals cabinets nearing the end of their useful life, not one bad slide.
  • Counter seams separating or caulk lines failing. Movement from the cabinet base. Left alone, water gets into the substrate and the repair grows past a simple reseal.
  • Finish pitting or peeling on fixtures. PVD and chrome finishes pit faster with hard water and harsh cleaners. Once the finish is gone, replacement is the honest fix.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what American Standard-friendly kitchen work costs in Glendale, line by line. These are installed ranges, parts and labor together.

Job Installed range (Glendale)
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range: cabinet layout and box count, counter material, whether the layout moves plumbing or electrical, and the condition behind the old cabinets. Faucet and sink trim get itemized separately so you see the American Standard part price on the quote, not buried in a lump sum. Permits pulled and inspections signed on every eligible job. Everything is backed by the written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check for yourself: turn off the supply valves, look at the model tag, measure the faucet hole spacing, and read the cabinet interior for water damage or mold. That’s information, not repair. Where DIY goes wrong is anything behind a valve or under a counter you can’t reach cleanly. Shutting off a corroded old angle stop to swap a cartridge often snaps the valve, and suddenly the water’s off for the whole house. Cutting a counter for a new island or sink you bought American Standard for, if the template’s off by a quarter inch, is now a $2,000 countertop. For any water line, drain, or structural cut, that’s a licensed plumber or our crew. The inspector who signs off works for you. Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch