Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
American Standard Home Additions & ADU: The Glendale Owner’s Guide
If you’re adding on to a home that already has American Standard systems in it, you can keep working with what you have. Additions typically run $45,000 – $130,000 in Glendale, detached ADUs run $90,000 – $220,000, and garage conversions land between $30,000 and $80,000. We plan each addition around the fixtures, water lines, and mechanicals already in the house, then pull the permits and get every inspection signed. Most Glendale additions are planned jobs, not emergencies, so we schedule a free estimate and start when the drawings and permits are ready.
Barrett & Sons Construction Glendale is an independent construction team. We’re not affiliated with American Standard, and we don’t manufacture or stock their parts. We build additions and ADUs that work with the American Standard fixtures, water heaters, and connections you already own.
Key Takeaways
- An American Standard home addition or ADU in Glendale runs $45,000 – $130,000 for the addition itself; detached ADUs are $90,000 – $220,000.
- Garage conversions are the lower-cost route at $30,000 – $80,000, and they’re the most common ADU path we quote in Glendale.
- Every eligible job gets permits pulled and inspections signed. No exceptions, no “permits are optional” talk.
- Prices change only in writing, through a change order, before the work happens.
- Every completed job is backed by the 90-Day Done Right Promise.
Which American Standard Models This Applies To
American Standard is a plumbing and HVAC brand, so this page is about additions that tie into the American Standard fixtures, water heater, and supply lines already serving the house. When we scope an addition, we identify what’s actually installed: the water heater plate on the tank (American Standard and similar brands print the model, serial, and capacity there), the toilet and faucet model numbers stamped inside the tank lid or on the trim, and the size and material of the existing supply and drain lines. That tells us whether a new bathroom or kitchen in the addition can tap into the same infrastructure.
Here’s the gotcha. American Standard water heaters from the last decade commonly carry a 6-, 9-, or 12-year tank warranty, and the serial number tells you which. If the existing unit is near the end of its warranty and the addition is going to add draw to it, we quote the replacement in the same scope rather than a surprise later. That’s information you can verify on the tank plate yourself.
On the OEM-versus-aftermarket question for American Standard parts, the honest answer is that faucet cartridges and fill valves are where aftermarket copies fit poorly. Tank internals and cartridges go OEM. Supply-line fittings are where aftermarket is fine if the spec matches.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your American Standard Home Additions & ADU Is Failing
Additions don’t fail all at once. They announce themselves. These are the five symptoms we see most in Glendale homes, and what each one usually points to.
- The addition bathroom drains slow, or the American Standard toilet backs up. A new fixture on an old undersized drain line is the usual culprit. The pipe can’t carry the added flow, so it backs up on a schedule instead of a one-off.
- The water heater can’t keep up after the addition was finished. An American Standard unit sized for a two-bath house can’t serve three baths and a kitchen. You’ll notice lukewarm showers during morning routines, and the tank plate’s capacity number is the place to start.
- The addition stays cold in winter or hot in summer. Either the new room wasn’t tied into the existing HVAC properly, or the duct runs are undersized. Glendale’s summer heat makes this obvious in July and August.
- You find gaps, cracks, or sagging where the addition meets the original house. That seam is where flashings and vapor barriers are done, and it’s where shortcuts show up within a couple of seasons.
- You’ve got a closet or hallway that was converted without a permit, and it’s showing. Unpermitted conversions are common in Glendale, and they surface at resale or at the first electrical or plumbing problem. We look up the permit history before quoting.
Replacement Cost & What’s Included
These are our installed price ranges for Glendale. They reflect what we actually see in this market and cover labor, materials, permits, and inspection.
| Scope | Typical installed price |
|---|---|
| House addition | $45,000 – $130,000 |
| Detached ADU | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Full kitchen remodel (if part of the addition) | $14,000 – $45,000 |
| Full bathroom remodel (if part of the addition) | $9,000 – $28,000 |
What drives the range: foundation, framing, roof, mechanical runs, and how much of the existing American Standard plumbing can be reused versus replaced. Kitchen and bath finishes move the number as much as square footage does.
Every line item is on the written estimate before we start. All allowances are on paper. Any price change comes through a written change order before work proceeds. Every eligible job gets permits pulled and inspections signed, and the finished addition is covered by the 90-Day Done Right Promise. Additions get premium brands we can name, not mystery parts off a van: KraftMaid and Cambria in kitchen finishes, Silestone for counters where that’s the better fit.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: the water heater plate for capacity and warranty, whether a slow drain is one fixture or the whole room, whether an outlet is warm to the touch, and whether the addition’s exterior shows gaps at the seam with the main house. Write it down. That list is what a good estimate starts from.
What we don’t suggest as DIY: extending gas lines, adding electrical circuits to an existing panel, moving drain lines, or tying a new roof into an old one. These are the jobs that fail inspection and, worse, fail safely. Electrical and gas work belongs with a licensed professional, and we say that plainly because it’s true. Permits are part of the deal here, not an optional add-on.
Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. A live person answers, 24 hours a day. If you already have a written estimate, take advantage of the free second opinion. Ask about the four standing offers: $40 off any repair over $200, no trip charge inside the county, the permanent 10% senior and veteran discount, and the second opinion on any written estimate. Our crew members carry up to 28 years of hands-on experience.
FAQs
A well-built addition on proper footings should last the life of the house, and the American Standard fixtures inside it are what age first. Water heaters typically last 8 – 12 years, and faucet cartridges 5 – 10. In Glendale’s climate, the roof-to-wall seam is the joint to watch, and it’s the one that needs reflashing every 15 – 20 years in our experience.
Sometimes, yes, but it depends on what’s actually failing. A slow drain, an undersized water heater, or a failing supply line can often be repaired or upgraded without an addition. A leaking roof seam at the addition is repair work. What can’t be repaired is a room that was never properly framed or permitted. We’ll tell you which one you’re facing before quoting anything. Call (844) 560-4526 for an exact quote. Estimates are free.
A house addition typically runs 3 – 5 months from permit to final inspection. A garage conversion runs 2 – 4 months. A detached ADU runs 6 – 9 months. Permit review time in Glendale is the variable, and we schedule it into the plan from the start rather than telling you it won’t matter. Any schedule change that touches scope arrives as a written change order before it happens.
We source American Standard-compatible fixtures and fittings through licensed plumbing suppliers, matched to the model numbers we record from your existing equipment. We don’t carry parts on a truck or stock parts in a warehouse, so every part is ordered to the job. Where OEM parts are the right call (faucet cartridges, tank internals), that’s what we specify. Call (844) 560-4526 to start with a free estimate.
Contact Barrett & Sons Construction Glendale
If you’re planning an addition or ADU anywhere in Glendale and you want the scope in writing, the permits pulled, and a face you’ll see again at the hardware store, call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. Founded in 1998 and still owner-operated, every price change in writing and every job backed by the 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.