Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Kitchen Remodeling: The Glendale Owner’s Guide
Toto doesn’t make kitchen cabinetry, so what you’re really pricing is a kitchen remodel in Glendale built around Toto’s kitchen fixtures – the sink and faucet system, the under-sink water filtration, and the washlet-style convenience hardware Toto owners tend to specify throughout the house. A full kitchen remodel in Glendale runs $14,000 to $45,000 installed, with cabinet installation at $4,000 to $13,000 and countertop installation at $2,000 to $6,500. We can’t promise same-day on a kitchen remodel – nobody can – but we can promise a written line-item estimate and a crew that shows up when we say.
Owners usually land here the same way. The faucet starts dripping at the base. The filter housing won’t seat right after the last cartridge change. A cabinet door over the dishwasher has swollen and won’t close flush. Or the whole kitchen is fine except one countertop seam that’s been a slow annoyance for three years. Whatever brought you here, we’ll put the scope in writing before any work starts.
One honest note up front: Barrett & Sons Construction Glendale is an independent remodeling contractor, not affiliated with Toto. We install, fit, and remodel around Toto kitchen products, but we don’t manufacture or warrant Toto’s goods.
Which Toto Models This Applies To
Toto’s kitchen line splits basically in two: the sink and faucet families (the ones you’ll spec into a remodel) and the under-sink filtration hardware that most Toto owners add at the same time. On the faucet side, Toto’s catalog uses a series naming scheme where the first letters flag the finish and mounting style – a “T” series bar/prep faucet fits an 8-inch spread, while the full-size kitchen pull-downs want a 1-3/8-inch sink hole diameter. That 1-3/8-inch spec is the most common gotcha we see in Glendale: a homeowner buys a replacement faucet online, then discovers the old sink deck was punched at 1-1/2 inches and the new one wobbles in the hole.
To identify what you actually have, pull the faucet and look for a model sticker on the shank underneath the sink deck, or measure the sink hole spacing center-to-center (common: 4 inches, 8 inches, or single-hole). For Toto specifically, the OEM-vs-aftermarket call is usually easy: Toto’s own replacement cartridges last longer and are machined to the exact spec, and the aftermarket copies save maybe $12 and drip again in two years. On the filtration side, Toto’s cartridges are proprietary – there’s no honest aftermarket equivalent, so don’t let anyone talk you into a generic one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Kitchen Remodeling Is Failing
- Drip at the faucet base or spout. Usually a worn ceramic cartridge, not the whole faucet. On a Toto pull-down, that cartridge swap is a $25 to $60 part plus a service call – don’t let anyone sell you a new $400 faucet for a cartridge problem.
- Filter housing won’t seal after a cartridge change. The O-ring has either hardened or been pinched on install. This one fails quietly until you notice water pooling under the cabinet months later.
- Cabinet door over the dishwasher won’t close flush. Door swelling from steam exposure, common in Glendale kitchens where the dishwasher sits under a run of cabinets without a heat shield. Left alone, the hinge plate pulls out of the swollen wood.
- Countertop seam opening up. Caulk failing along a laminate or stone seam, usually where the sink cutout meets the counter. We see this a lot on north-facing Glendale walls where the cabinet gets cool and damp in winter, flexing the seam.
- Under-sink cabinet bottom soft or stained. Slow leak from the filter or supply line collecting on the cabinet floor. If the floor is soft to the touch, the fix is a cabinet-bottom replacement, not just a fresh bead of caulk.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what kitchen work in Glendale actually runs, installed, with the part, the labor, and the cleanup in the number:
| Scope | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range is driven by countertop material (Cambria or Silestone quartz sits at the top; laminate at the bottom), cabinet brand and door style (we install KraftMaid), and whether the job needs a licensed plumber to re-pipe the sink and filtration. Everything arrives as a written line-item quote with a written change order before any scope change – no surprise invoices at the end. All work is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check the faucet cartridge, tighten a supply line, and replace a filter O-ring yourself. Where DIY goes wrong with Toto kitchen work is the filtration system: a housing that isn’t seated correctly leaks slowly under the cabinet, and by the time you notice, the cabinet floor and the wall behind it are wet. That’s a mold problem disguised as a plumbing job. Same with the sink hole measurement – swapping a faucet into a hole that’s the wrong size means either a wobble that never seats right or drilling the deck, and drilling the deck wrong means a new sink. If you’re past the filter cartridge and the drip, call (844) 560-4526 and we’ll put eyes on it before you spend money on the wrong part.
FAQs
How long does a Toto kitchen faucet cartridge last in Glendale? Most last 8 to 12 years in Glendale’s water, which runs harder than a lot of the country and wears ceramic cartridges a little faster. If yours is past that and dripping, a $25 to $60 replacement cartridge plus a service call is the honest fix. Call (844) 560-4526 for a written quote on the repair.
Can I repair it instead of replacing the whole fixture? Yes, in most cases. A dripping Toto kitchen faucet is almost always a cartridge or O-ring, not a dead fixture, and repairing saves you $300 to $400 over a new faucet. The exception is a cracked faucet body or a pitted valve seat – those need replacement. We’ll tell you which one you’re looking at, in writing, before any work starts.
How long does the swap take? A cartridge or O-ring swap is usually 30 to 60 minutes, and a full faucet replacement is 1 to 2 hours. If we’re also re-fitting the sink hole or replacing a cabinet bottom, plan a half day. Call (844) 560-4526 to schedule a free estimate and we’ll give you an exact window.
How do you source the Toto part? We source from Toto’s authorized parts channel for cartridges and filtration housings, and we install premium brand cabinetry (KraftMaid) and quartz (Cambria, Silestone) from their authorized distributors. You’ll see the brand and model on the written quote before you sign, so you can look it up yourself – we don’t install mystery brands off a van.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.
Call (844) 560-4526 for a free estimate on your Toto kitchen work – a live person answers, 24 hours a day. Ask about the Free Second Opinion on Any Written Estimate, the $40 Off Any Repair Over $200, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.