Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Glendale Owner’s Guide
If you own a Sterling-built addition or ADU in Glendale and something has started to fail – a seam, a window frame, a door that won’t sit true – we handle the repair and rebuild side of that work. Home additions in Glendale run $45,000 – $130,000 depending on scope, and most Sterling-related structural or envelope fixes fall well under that. We’re an independent contractor and not affiliated with Sterling; what we do is diagnose what failed, source the right compatible materials, and put it back together with the permit pulled and the work in writing.
Owners usually find the problem the same way: a hairline crack that widens over one summer, a patio cover that starts to sag at the header, or a converted-garage ADU where the floor stays cold and the baseboard swells after rain. By the time it’s visible, it’s been working for a while.
Which Sterling Models This Applies To
Sterling has built additions and ADUs across a range of configurations over the years, and the parts don’t cross over cleanly between them. The label on the original plans, the permit packet filed with the City of Glendale, or a stamp inside a door jamb or on a window sash will tell you which series you’re dealing with. Measure twice before you order anything: header dimensions, window rough openings, and the wall thickness at the failure point all matter, and a half-inch mistake on a pre-hung unit means a return trip.
On the OEM-versus-aftermarket question, we’re honest with Glendale owners: for structural lumber, sheathing, and fasteners, a quality equivalent is usually the right call – it meets code, it’s inspectable, and it lasts. For windows, doors, and anything with a manufacturer-specific profile, matching the original Sterling spec saves you patching and re-trimming. Andersen and Marvin replacements are what we typically reach for when the Sterling profile is discontinued.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Home Additions & ADU Is Failing
- A crack that keeps coming back. Hairline cracks in drywall at a corner or header are usually settlement or a truss that’s moving; if it reopens after patching, the cause is still active.
- A door or window that won’t close flush. That’s often a sign the frame has shifted or the header is deflecting – not a hinge problem, despite how it feels.
- Water staining at the base of a wall. In Glendale, we see this most after the winter rains, when a flashing detail at the addition-to-house junction has failed.
- Cold floors or a musty smell in a converted garage. Usually a vapor barrier or insulation issue that was never properly addressed at the original build.
- A sagging roofline or patio cover. This one deserves a call before you do anything else – it can indicate a structural member that’s carrying more than it should.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Sterling additions and ADUs in Glendale, here’s where the money typically lands:
- Structural or envelope repair: $3,000 – $18,000 depending on the extent
- Window or door replacement (per unit): $800 – $2,500 installed
- Full addition build-out: $45,000 – $130,000
- ADU construction or rebuild: $90,000 – $220,000
- Garage conversion finish-out: $30,000 – $80,000
Every quote is line-item: labor, materials, permits, and any allowance, all in writing before anyone touches the job. If the scope changes mid-job, you get a written change order first. Permits are pulled and inspected on every eligible job, and the work is backed by our 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: look for cracks, take photos, feel for soft spots in drywall, and confirm whether a door is rubbing at the top or the side. That information helps us diagnose faster.
What we’d steer you away from is opening up a wall to “see what’s behind it,” moving a structural post, or trying to re-flash a roof junction without knowing what’s under the shingles. Those are the spots where a small repair becomes a big one, and where permits and inspections actually protect you. Our crew members have up to 28 years of experience, and they’ve seen the mistakes. Call (844) 560-4526 for a free estimate – we’ll tell you honestly what needs fixing and what can wait.
FAQs
A well-built addition should give you 25 to 40 years before significant structural work, but Glendale’s dry summers and wet winters put real stress on flashing and caulk joints – expect to re-seal those every 5 to 8 years. Call (844) 560-4526 for an inspection if you’re not sure where your addition stands.
Often, yes. Cracked drywall, failed caulk, and even a shifted window can frequently be repaired rather than replaced, and we’ll tell you which is which. The exception is a structural member that’s deflecting – that usually needs replacement. Estimates are free, so there’s no cost to find out.
A window or door swap is typically a day. Structural repairs run 2 to 5 days depending on scope and inspection scheduling. Full additions are weeks to months, and we’ll give you a written timeline before we start.
We start with the original plans or the permit packet at Glendale City Hall, measure the rough opening or failing member directly, and order to that spec. If the original Sterling part is discontinued, we source a compatible equivalent from brands we trust – Andersen, Marvin, GAF, CertainTeed. We don’t carry parts on a truck; we order to your job. Call (844) 560-4526 to get started.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.