Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Driveway & Pavers: The Glendale Owner’s Guide
We install GAF driveway and paver systems for Glendale homeowners at $7,000 – $18,000 for a paver driveway, $4,500 – $12,000 for concrete, and $250 – $700 for a straightforward reseal, depending on square footage, base condition, and the pattern you pick. Paver work is planned work, not emergency work: your free estimate gets you a written line-item quote and a start date, not a truck in the driveway this afternoon. Most Glendale owners find out something is wrong the same way. There’s a low corner where water pools after a rain, a couple of pavers have gone a half-inch proud of their neighbors, or a hairline of sand has washed toward the street for the second winter running. One joint settling isn’t a panic. Three in the same run usually means the base underneath has moved, and that’s the part worth talking about.
Which GAF Models This Applies To
GAF is best known for roofing, and their driveway and paver side of the catalog is a smaller, more selective line. That matters here, because the compatibility question on a GAF hardscape job is almost never “which part number” – it’s “which system is under this, and does the replacement piece match it.”
The identifying work happens in three places, and you can do all of it yourself before anyone visits:
- Original paperwork or the delivery slip. GAF paver cartons and pallet labels list the collection name, the color blend, and the size. If the previous owner left a folder in the garage, that’s your fastest lane to an exact match.
- A pulled-up paver with the sand brushed off. Older stock is sometimes stamped with a manufacturer mark on the side or underside. A single lifted stone tells you more than an hour online.
- A measured footprint. Measure length, width, and thickness to the nearest eighth of an inch. Thickness is the compatibility gotcha everybody gets wrong: a 2 3/8-inch paver laid next to a 2 3/4-inch field will translate that lip into an edge every shoe catches and every wheel tracks over. It’s also where water starts to trap and freeze-thaw – which, in Glendale’s inland-side winters, is exactly how corners spall.
On the OEM-versus-aftermarket question, we’re straight with you: for pavers, the “original part” is a color-matched stone from the same collection, and mixing collections almost always shows as a slightly different face texture in daylight. Where the exact GAF piece isn’t available, a quality equal-thickness stone in a close blend can work inside a field, but never at a bullnose edge or a visible border – that’s where a mismatch announces itself. We’re an independent contractor and not affiliated with GAF, so we’ll tell you plainly when a match is a match and when it’s a compromise. Matching is one of the places we bring KraftMaid and Cambria-level brand discipline to the hardscape side, too.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your GAF Driveway & Pavers Is Failing
Five symptoms we see in Glendale again and again, each with the cause underneath it:
- Pavers rocking when you walk on them. Rocking means the bedding sand has washed out or compacted unevenly beneath the stone – usually a drainage problem above it, not a bad paver.
- Sand washing across the driveway after rain. Polymeric sand should lock and stay. Consistent loss points to an unsealed joint, a low edge, or water that has nowhere to go but over the surface.
- A lip or step at the edge. A 1/4-inch or larger lip between the paver field and a border, apron, or garage threshold means the base edge has settled or was never compacted in lifts. It’s a trip hazard first, a water trap second.
- Efflorescence – the white, chalky bloom. Glendale’s dry summers followed by wet winters pull salts up through the stone. It can be cosmetic, but when it keeps returning in the same patch, moisture is getting under the surface and staying there.
- Ruts or depressions in a wheel path. Real depressions mean sub-base failure, not surfacing wear. Replacing the top stone without fixing what’s underneath just re-buries the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Glendale pricing actually looks like, installed, with the full line-item in writing before anything moves:
| Scope | Installed Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
Three things move you up or down the range: square footage, how much base has to be removed and re-compacted, and whether you’re matching an existing paver blend or going new. Sealing is the cheap end and worth it whenever the joints are still sound – a $250 – $700 reseal protects the sand and surface far longer than your luck holds unsealed. Every price change on a Barrett & Sons job arrives as a written change order before work happens. That’s the whole point: the allowance that isn’t on paper is a surprise waiting for a date. If a removal turns up a failed base, you’ll see it in writing and sign off before we dig another inch. The completed work carries our 90-Day Done Right Promise – if it isn’t right, one call brings Tom back.
DIY or Call Us?
Some of this you can handle safely yourself, and some of it you shouldn’t try. Here’s the honest split.
Safe for an owner to check: measuring pavers and thickness, reading labels and paperwork, photographing the settled area after a rain so you can show us where the low spot fills, resealing a sound driveway on a dry day, and sweeping in a little polymeric sand to a single joint. Small, single-joint fixes and a good reseal are genuinely homeowner work.
Where it goes wrong: resetting a settled field on top of a failed base. Pulling pavers to “shore up” a corner without re-compacting the sub-base in lifts just re-sets the stone over the same bad problem – and once you’ve opened the base, water has a free path in. Depth and slope failures aren’t a weekend job, and digging into them without knowing what’s underneath is how a $300 fix becomes a $6,000 rebuild. This is planned work, so there’s no reason to rush. Get it measured right the first time.
Call (844) 560-4526 and we’ll come look, tell you straight whether a reseal covers it or the base has to be addressed, and put the number in writing. Estimates are free.
FAQs
How long does a GAF paver driveway last in Glendale? Twenty to thirty years is a fair expectation when the base is compacted correctly and the joints stay sealed – and the base, not the stone, is what determines which end of that you land on. Glendale’s dry summers and wet winters stress the surface, so a reseal every few years is the cheapest way to stretch life. Call (844) 560-4526 for a free look at yours.
Can it be repaired instead of replaced? Often, yes – a sound field with one settled run can be lifted, the base corrected, and the same pavers re-set with matching new stones only where needed. If ruts or widespread depressions mean base failure, though, spot repair just moves the problem. We’ll tell you which one you’ve got before quoting. Call (844) 560-4526.
How long does the swap take? A sealing job is done in a day. Re-setting a settled area is usually two to four days depending on access and how much base has to be reworked, and a full paver driveway install typically runs three to seven days. You’ll get the scheduled window in writing up front.
How do you source a matching paver? We start with your paperwork and labels, pull a stone to check the stamp, and match collection, blend, and thickness. Where the exact GAF piece isn’t available, we’ll show you a close equal-thickness replacement and put the difference in writing before you decide. Call (844) 560-4526 to walk through what you’ve got – and with the permanent 10% Senior & Veteran discount, plus $40 off any repair over $200, it’s worth asking about.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.