Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Roofing: The Glendale Owner’s Guide
We install and repair CertainTeed roofing systems across Glendale, and a full roof replacement here typically runs $8,000 – $20,000, while targeted repairs land between $400 and $1,800. If you’re reading this because of a leak, a lifted shingle, or granules piling up in your gutter, you’re in the right place. Most Glendale owners first notice a problem after a windy night in the foothills or the first real rain of the season, when a brown ring shows up on a ceiling or grit starts collecting at the bottom of a downspout. CertainTeed makes several shingle lines, and knowing exactly which one is on your roof is the difference between a fix that lasts and one that fails again next spring.
Which CertainTeed Models This Applies To
CertainTeed’s residential lines most common on Glendale roofs are Landmark, Landmark Pro, and Landmark TL. They were sold in several “generations” over the years, and the colors and profiles look similar, so you can’t tell them apart from the street. The differences that matter are dimensional. A standard Landmark is a three-tab-style laminate around 12 inches by 36 inches with a limited warranty, while Landmark Pro uses a heavier, dual-layer construction, and Landmark TL is a thicker, higher-profile tri-layer shingle. If your repair requires matching a shingle, pulling the part number off the original bundle wrapper or measuring an intact shingle’s exposure is how we identify the right match. Exposure is what you measure, not total length: the visible portion after overlap, usually around 5-5/8 inches to 8 inches depending on the line. That number tells us which shingle you have.
The OEM question matters here. CertainTeed factory shingles are the exact match for your roof, but a quality color-matched aftermarket shingle from a brand like GAF or Atlas can match on a small, concealed repair where it won’t be seen. For anything on a visible slope, we match the OEM CertainTeed shingle so the color and profile line up. This isn’t a question you should guess at: a mismatched shingle on a slope facing your driveway looks wrong for the next twenty years. We’re an independent service provider, not affiliated with CertainTeed, so we source the right part and tell you plainly which route is honest for your roof.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Roofing Is Failing
CertainTeed shingles are built to last, but Glendale’s heat and the Santa Ana wind patterns in the foothills stress a roof more than most. Here’s what typically fails and why.
- Granules in the gutters. The mineral granule layer is what shields the asphalt beneath from the sun. When it washes into gutters in sheets rather than a few grains, the shingle is aging out and the asphalt is exposed to UV.
- Shingles curling, clawing, or lifting at the edges. Heat cycling pulls the adhesive seal apart, and once the tab lifts, wind gets underneath. It starts on the hottest slope, usually south- or west-facing, and spreads.
- Bald, dark patches on a roof that used to match. This is granule loss concentrated where the sun hits hardest, and it means that area is closer to failing than the rest of the field. It’s how a single slope ages faster than the roof as a whole.
- A brown ring or stain on a ceiling or in the attic. By the time the stain shows inside, water has usually been getting under the field for a while. It’s a sign the underlayment or flashing is compromised, not just the surface.
- Lifted or missing shingles around vents, chimneys, and valleys. The flashing at a penetration is the most common failure point on any roof. A shingle that slides out at a pipe boot leaves a hole the size of your thumb, and that hole leaks for years before the ceiling tells you.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s how CertainTeed roofing work runs in Glendale, with parts and labor together. A single-slope repair is $400 – $1,800. A full roof replacement is $8,000 – $20,000 depending on the CertainTeed line, roof size, pitch, and how much old material has to come off. A metal roof, if you’re considering that instead, runs $15,000 – $40,000, and tile roof repair lands at $600 – $2,500. These are the ranges we work within, and every price change comes to you in a written change order before any work moves forward.
- Shingle repair (small area): $400 – $1,800
- Full CertainTeed roof replacement: $8,000 – $20,000
- Metal roof installation: $15,000 – $40,000
- Tile roof repair: $600 – $2,500
What drives the number: the CertainTeed line you pick, square footage, roof pitch, number of valleys and penetrations, and whether old material has to be stripped. Every eligible job includes permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.
DIY or Call Us?
You can safely check a roof from the ground with binoculars, look for granules in the gutter, and read a ceiling stain. Where DIY goes wrong on a roof is real: steep pitch, heights, and the fact that a repair done without matching the shingle and sealing the flashing correctly leaks again within a season. We don’t recommend walking a roof pitch above a low slope yourself, and anyone can fall. Glendale’s older homes often hide layered shingles or a deteriorated underlayment that you can’t see from the surface, and pulling a shingle can open a hole you can’t close before the next rain. The safe and honest move is to let us look. Call (844) 560-4526 for a free estimate, and we’ll tell you what’s actually wrong before you spend a dollar.
FAQs
A CertainTeed Landmark shingle is rated for a multi-decade service life, but in Glendale’s heat, a south- or west-facing slope can age faster than the shaded sides and need attention sooner. Keep granules in mind: once they’re washing off in sheets, the clock is running on that area. Call (844) 560-4526 for a free roof inspection if you’re not sure which stage you’re at.
Often yes. A localized repair at a failed penetration, a lifted valley, or a small field of worn shingles can be fixed for $400 – $1,800 without a full replacement. If the granule loss is widespread or the underlayment has failed across multiple slopes, a replacement at $8,000 – $20,000 is the honest call. Call us for a free estimate so you know which side of that line you’re on.
A targeted shingle or flashing repair is usually a matter of hours, while a full replacement runs over several days depending on roof size and how much old material comes off. Permits and inspections are scheduled around your job, not after it. Call (844) 560-4526 for a written scope and a realistic timeline.
We match your existing shingle by its line (Landmark, Landmark Pro, Landmark TL), color, and measured exposure, then source the OEM CertainTeed shingle for visible slopes and a quality color-matched alternative only where a concealed repair makes it honest to do so. We don’t claim to stock parts or carry a truckload: we identify the correct part and get it for your job. Call (844) 560-4526 for a free estimate and an exact match.
When you’re ready to face it head-on, call Barrett & Sons Construction at (844) 560-4526 to schedule your free estimate. We pull permits, put every scope and allowance in writing, and back it all with the 90-Day Done Right Promise. We also handle KraftMaid, Cambria, and Silestone for the rest of your house when the time comes.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.