Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Driveway & Pavers: The Glendale Owner’s Guide
If you’re looking at a cracked or settled CertainTeed paver installation in Glendale, you’re likely facing a correction job rather than a part swap. CertainTeed doesn’t manufacture pavers the way it manufactures siding or roofing – what most Glendale homeowners mean is CertainTeed-branded asphalt shingle packaging confusion, a paver line traced back to a contractor’s CertainTeed-certified installer, or the CertainTeed surface-protection products used on driveways. Full paver driveway installation in Glendale runs $7,000 – $18,000, and a targeted section repair usually falls well below that. We install and repair CertainTeed-compatible driveway systems across Glendale and can give you a written line-item quote with no surprises.
Owners usually discover the failure the same way: a hairline crack opens across three or four pavers after a winter rain, a Paver-Loc joint sand washes out along the slope toward the garage, or the driveway settles six inches below the front walk. Glendale’s clay-heavy soil and hot, dry summers push that settling hard every year.
Key Takeaways
- CertainTeed does not make pavers directly – most “CertainTeed driveway” issues trace to installer warranty, joint sand, or base failure.
- Glendale paver driveway installation runs $7,000 – $18,000; concrete runs $4,500 – $12,000; sealing runs $250 – $700.
- We’re an independent contractor, not affiliated with CertainTeed, and we don’t carry parts on a truck – everything is ordered to spec.
- Written change orders before any scope shift, permits pulled for full replacements, 90-Day Done Right Promise on every job.
Which CertainTeed Models This Applies To
CertainTeed’s residential catalog splits into three relevant lines for a Glendale driveway: CertainTeed Paver Base Panels (a stabilization underlayment some installers use under paver beds), CertainTeed DeckProtect and PaverProtect sealers, and the CertainTeed Certified Paver Installer warranty that came attached to your original install contract. If your driveway was installed by a CertainTeed certified contractor after the mid-2000s, your paperwork should include a warranty certificate referencing the install date and the product code.
First, find your documentation. Look in the original contractor’s folder for the “CertainTeed Certified Installer” card, which usually lists a job number and the specific paver series used. If the paver itself is branded, it’s not a CertainTeed paver – CertainTeed does not produce the hardscape units; they back the installation via their certified program. This is the compatibility gotcha: many Glendale homeowners call us asking for “CertainTeed pavers” when what they need is a warranty claim against the installer, a replacement of a non-CertainTeed paver with a matching unit, or a reapplication of CertainTeed PaverProtect sealer.
Measure twice before calling. Paver thickness matters (most driveways use 2 3/8-inch or 60mm units rated for vehicular load; walkways use 2 3/8-inch but thinner patio units exist at 1 1/2 inch). A 60mm paver supporting a Glendale driveway needs a base depth of 6 to 9 inches of compacted Class II base, and a mismatch in base is the most common failure we see in Glendale homes built between 1985 and 2010. If you’re replacing a section, the base specs are what to specify, not just the paver color.
On OEM vs aftermarket: CertainTeed doesn’t sell paver replacement units – the closest you’ll get to “OEM” is the original manufacturer of the paver your installer used (Angelus, Belgard, Techo-Bloc, and Orco are the four most common in Glendale). We work with all four, plus CertainTeed’s sealer line for maintenance. Installing an unmatched paver is the equivalent of putting the wrong-size tire on one wheel.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CertainTeed Driveway & Pavers Is Failing
- Joint sand washing out after rain. Polymer joint sand fails first in Glendale’s clay soil because water pools rather than drains. If you can push a screwdriver 2 inches into the joint between pavers, the sand is gone and the base is exposed to erosion.
- Hairline cracks across three or more pavers. Not a single crack – cracks that jump across adjacent units. This signals base deflection, not paver failure. A single cracked paver is replaceable; three in a row means the subgrade under those pavers has shifted.
- Ponding water near the garage apron or street curb. CertainTeed PaverProtect sealer doesn’t fix a slope problem. If water stands longer than four hours after rain, the drainage profile is wrong and no sealer will correct it.
- Loose or “rocking” pavers on the driveway edge. A paver you can lift by hand or that wobbles when you walk on it means edge restraint failure. Glendale’s summer expansion cycles are brutal on plastic edge restraints; concrete restraints hold up better.
- Efflorescence that returns within six weeks of cleaning. White salt deposits on CertainTeed-protected pavers that come back fast usually indicate moisture trapped beneath the sealer. The fix is stripping, drying, and resealing with the correct product for your paver type, not more frequent cleaning.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Targeted paver section repair and full CertainTeed-compatible paver replacement in Glendale break down like this:
| Service | Typical Glendale Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
| Driveway replacement (full teardown and redo) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Paver patio installation | $3,500 – $11,000 |
What drives the range: square footage, base depth required (a 1980s Glendale driveway needing 9-inch base hits the high end), paver series selection, drainage correction, and whether a permit is required by the Glendale municipal code for the full replacement. What’s included in our quote: materials, base prep, edge restraints, joint sand, cleanup, and the written 90-Day Done Right Promise. Parts and labor are always itemized. Permits pulled and inspections signed on eligible replacements.
DIY or Call Us?
What you can safely do: sweep and refill joint sand, apply CertainTeed PaverProtect sealer per label, replace one individual cracked paver with a proper hand tamper, and check drainage slope with a 4-foot level. What goes wrong when Glendale owners DIY the deeper work: base compaction without a plate compactor leaves 30% to 40% less density than a machine gets, so the pavers settle within a year. Cutting pavers without a proper wet saw chips edges and voids the manufacturer’s warranty. And lifting more than four pavers in a row without marking the base profile means you won’t get the pattern back where you found it.
If your CertainTeed driveway problem involves settling, drainage, or more than three pavers, it’s a base job, not a surface job. Call us at (844) 560-4526 and we’ll give you a written estimate before anyone touches a paver.
FAQs
A properly installed 60mm paver driveway with 6 to 9 inches of compacted base lasts 25 to 30 years in Glendale’s climate. The paver itself usually outlasts the sealer (reapply every 3 to 5 years) and the joint sand (every 2 to 3 years in clay-heavy Glendale soil). Sealer and sand maintenance is what keeps the warranty intact.
Yes, if the failure is under 15% of the driveway area and it’s a joint sand, single paver, or drainage correction. If more than three adjacent pavers show deflection or the base has failed below the surface, section repair is the honest answer. We tell you which in writing before we quote the job.
A single-paver section repair done correctly takes 2 to 4 hours on site. A full paver driveway replacement in Glendale runs 3 to 5 days from tear-out to final sand, depending on square footage and base depth. Weather and permit timing add a day or two.
We identify the original paver manufacturer by matching color, thickness, and edge profile against the four most common Glendale installs (Angelus, Belgard, Techo-Bloc, Orco), then order from an authorized distributor. If the exact paver is discontinued, we show you the closest match in person before you commit. CertainTeed-branded sealers and base panels are ordered through CertainTeed’s distributor network. Nothing sits on a truck.
Barrett & Sons Construction Glendale is an independent contractor – we are not affiliated with or sponsored by CertainTeed. We also handle KraftMaid, Cambria, and Silestone kitchen products across Glendale.
If you’re ready for a real number, not a phone-quote guess, call (844) 560-4526 for a free estimate. We’ll walk the driveway, check the base, and put the scope in writing – including any change orders before work starts. Proudly serving Glendale and nearby areas for over 29 years.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.