Bathroom remodeling
Kitchen remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Bathroom Remodeling: The Glendale Owner’s Guide
If you’re calling about IKO bathroom remodeling in Glendale, here’s the honest answer up front: a full bathroom remodel with IKO materials typically runs $9,000 – $28,000 installed, and a smaller hall bath or powder room lands closer to $5,000 – $12,000. This is planned work, not emergency work, so we schedule it rather than promise it same-day. The free estimate is where every number gets pinned down.
Most Glendale owners don’t start with a part number. They start with a symptom: a hairline crack climbing the IKO shower tile, a grout line that keeps going dark no matter how hard they scrub, or a toilet flange that rocks a quarter inch every time someone sits down. In older Glendale homes, especially the 1920s bungalows around Adams Hill and the post-war tracts near Chevy Chase, we routinely find a previous remodel layered over original framing with no waterproofing membrane behind the tile at all. The IKO surface looked fine; the assembly underneath had been quietly failing for years.
- Bathroom Remodel: $9,000 – $28,000 installed
- Small Bathroom Remodel: $5,000 – $12,000 installed
- Walk-In Shower Installation: $4,500 – $12,000 installed
- Tub-to-Shower Conversion: $3,500 – $10,000 installed
Which IKO Models This Applies To
IKO is best known for roofing, waterproofing membranes, and substrate boards, so when a Glendale owner says “IKO bathroom” they usually mean one of a few things: an IKO waterproofing membrane behind the shower tile, an IKO cement or tile backer board, or – more often than you’d think – a mixed assembly where the IKO membrane went down over a substrate that wasn’t rated for it. The first step is identifying what’s actually in your wall. Look for the printed brand line and product code on the board face or membrane edge; if it’s buried, a small exploratory opening at a shower valve or behind the vanity tells us in minutes what a guessing game never will.
IKO membrane systems are specified by thickness and by the substrate they bond to, and that compatibility is the gotcha. A membrane rated for one backer thickness and installed on another will pass a visual inspection and still fail at the seams within a few years. On the OEM-versus-aftermarket question: IKO-compatible membranes and boards from other quality manufacturers are legitimate and often cost less, but only when the whole system is matched – board, membrane, thin-set, and seam tape from one compatible family. Mixing brands across those four layers is where most Glendale bathroom failures we open up began.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Bathroom Remodeling Is Failing
- Grout that darkens and won’t dry out. Moisture is getting past the tile face and sitting in the substrate. In Glendale’s dry climate, grout should dry fast – when it doesn’t, the waterproofing layer beneath has been compromised, not the grout itself.
- Tile that sounds hollow when tapped. A dull thud instead of a sharp click means the thin-set has debonded from the backer. That usually traces to a backer board installed without the right fastening schedule or over framing that moves.
- Hairline cracks running along seams or corners. Movement at inside corners and at the tub-to-wall joint. Without a proper flexible seal at those changes of plane, the IKO seam tape and membrane take the stress and eventually split.
- Soft or spongy floor near the toilet or shower curb. Water has reached the subfloor. On older Glendale homes with original wood subfloor, this is the symptom that turns a tile job into a structural repair if left another season.
- Musty smell that returns after cleaning. Mold growing in a wall cavity that stays damp because the assembly never drains or dries. The smell is the messenger; the wet cavity is the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full IKO bathroom remodel in Glendale runs $9,000 – $28,000, a small bath $5,000 – $12,000, a walk-in shower $4,500 – $12,000, and a tub-to-shower conversion $3,500 – $10,000. What drives you toward the top of the range: substrate replacement when the subfloor is soft, moving plumbing to relocate a drain, and premium tile or fixtures. What keeps you low: a straightforward layout with sound framing underneath.
Every price change on your job is a written change order issued before the work happens – allowances in writing, scope in writing. We don’t quote a number on the phone and hand you a different bill at the door. Permits are pulled and inspections signed on every eligible Glendale job, and the whole thing is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: look for the product label behind an access panel, press on tile to hear for hollow spots, and watch how long grout takes to dry after a shower. That’s information-gathering, not repair.
Where DIY goes wrong is the assembly. Redoing an IKO membrane over an existing failed one, skipping the substrate inspection, or resealing seams without understanding what caused the failure just moves the leak a foot over. Waterproofing done wrong doesn’t show up for two or three years, and by then the damage is inside the wall. If you’re seeing soft floors or a smell that keeps coming back, that’s our cue, not a weekend project.
Call (844) 560-4526 to schedule your free estimate. A live person answers, day or night.
FAQs
How long does an IKO bathroom assembly last in Glendale? A properly installed IKO membrane system over the correct substrate typically lasts 20 to 30 years. The failure usually isn’t the material – it’s the installation underneath. Poorly matched layers start failing in 5 to 8 years, which is exactly why we inspect before we quote.
Can the membrane be repaired instead of replaced? Sometimes, if the failure is a single localized seam and the substrate is sound. Once moisture has reached the backer board or subfloor, spot repair is throwing money at a bigger problem. Call (844) 560-4526 for an honest read on which situation you have – the estimate is free.
How long does the swap take? A focused shower rebuild runs a few days to a week once materials are on site. A full bathroom remodel typically takes two to four weeks depending on scope, tile complexity, and whether plumbing moves. We give you a realistic schedule in writing before we start.
How do you source the IKO part? We identify the exact product from the label or an exploratory opening, then order from a professional supplier matched to your existing assembly. We don’t carry parts on a truck and we don’t stock local inventory – we spec it correctly and bring it to your job.
We’re an independent contractor and not affiliated with IKO. We also install KraftMaid and Cambria cabinetry, and Silestone countertops when a bath or adjoining space calls for them. Tom Barrett’s name, address, and license number are published – look them up before you sign anything. Our crews have up to 28 years of experience, every eligible job gets permits pulled, and every completed job carries the written 90-Day Done Right Promise. Call (844) 560-4526 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.