Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling in Glendale, CA: The Owner’s Guide
Tamko kitchen remodeling in Glendale typically runs $14,000 – $45,000 for a full kitchen, from cabinet installation and countertops through backsplash and island work, and we quote it in writing before any material gets ordered. Most Glendale owners don’t start with a brand search. They start with a symptom: a cabinet door that won’t sit flush, a countertop seam that’s collected grime for years, a backsplash tile that popped loose after a small settling shift. That’s when they pull out the paperwork and find the Tamko name on the materials list, and that’s usually the first call we get.
Key Takeaways
- Tamko-compatible kitchen work in Glendale: $14,000 – $45,000 installed, quoted line by line.
- We install and finish the brands you can look up: KraftMaid, Cambria, Silestone, and Tamko-related systems where the specs line up.
- Every eligible job gets permits pulled and inspections signed. No verbal-only scopes.
- Every price change is a written change order before the work moves.
- We’re an independent contractor, not affiliated with Tamko. We work with what’s already in your kitchen.
Which Tamko Models This Applies To
Tamko is best known for roofing and waterproofing, so when a Glendale homeowner says “the Tamko part in my kitchen,” nine times out of ten they mean a Tamko underlayment, moisture barrier, or decking product that went in under tile or behind cabinetry during an earlier remodel. That matters because the compatibility question isn’t about a model number on a box; it’s about what’s physically under your floor, wall, or counter. Before we quote anything, we find the spec. Look for the product label on the original packaging if you still have it, or a stamp or print on the membrane itself once it’s exposed. Take a photo. Measure the thickness.
OEM-vs-aftermarket in this category is less about brand loyalty and more about what meets California code and your substrate. A quality equivalent membrane that hits the same thickness and rating is usually the honest choice; a Tamko-matched one is the right call when the rest of the assembly was built around it. We’ll tell you which applies to your Glendale kitchen after we open it up. Ask anyone on your street, or look up the license number yourself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
- Grout that keeps cracking along the same line. The membrane underneath has lost adhesion or was never laid flat to begin with. In Glendale’s summer heat cycling, that shows up fast.
- A soft or hollow sound underfoot near the sink or dishwasher. Moisture got past the barrier and the subfloor has started to break down. Left alone, it spreads.
- Countertop seams that open and close with the seasons. Often a moisture or substrate movement issue, not just a bad caulk line.
- Cabinet doors that won’t stay aligned. The wall behind them is moving, usually because the barrier failed and the framing absorbed moisture.
- A musty smell that returns after cleaning. That’s the strongest signal. It means moisture is trapped where you can’t see it.
Two or more of those together and it’s worth having someone look before you spend money on cosmetic fixes over a problem that’s underneath.
Replacement Cost & What’s Included
Here’s what kitchen work runs in Glendale, line by line. These are installed ranges, not material-only:
| Work | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: how much of the existing kitchen has to come out, whether the membrane and substrate need replacing or just repairing, cabinet style (a KraftMaid upgrade moves the number), and countertop material (Cambria or Silestone shift it more than a laminate. Every scope, allowance, and price change is in writing before work happens. The finished job carries the written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself: pull out a lower cabinet drawer and look for water staining on the cabinet base, check the caulk and grout lines around the sink, and photograph any label or print you can find on the barrier. That’s real information and it helps us quote faster. Where DIY goes wrong is past that point. Lifting tile to inspect the membrane, cutting into substrate, or trying to re-seal a barrier that’s already failed usually turns a repair into a larger job and risks cutting a water or electrical line you can’t see. We’d rather you call and let us look. Call (844) 560-4526 and we’ll come out, open it up carefully, and tell you what’s actually wrong before you spend a dime on materials.
FAQs
A properly installed membrane can last the life of the floor or wall assembly, typically 20 to 30 years. In Glendale’s inland heat, the real limiting factor is adhesion at the seams and around the sink where moisture concentrates, so most failures show up in that 10 to 15 year window rather than at the end of the product’s rated life. Call (844) 560-4526 for a look.
Sometimes, yes. A localized failure around a sink or dishwasher often just needs a targeted repair and re-seal. Once water has spread under the substrate, replacement of the affected section is usually the honest call. We’ll tell you which one you’re facing.
A targeted repair is typically a day. A full section replacement under tile or cabinetry runs several days once you account for demo, cure time, and re-installation. We schedule it in writing so you know what to expect.
We source Tamko-compatible materials through suppliers we can verify, and where a quality equivalent meets the same spec and California code, we’ll show you both options and let you decide. Nothing gets ordered without your sign-off in writing.
We also work with KraftMaid, Cambria, and Silestone on the finish side, so the whole kitchen comes together under one scope.
Ready for a Straight Answer on Your Kitchen?
We’re happy to give you a free second opinion on any written estimate, and there’s no trip charge inside the county. If your kitchen needs work, call (844) 560-4526 for a free estimate. A live person answers, and we’ll show up when we said we would.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.