A Barrett company - serving Glendale, CA

Boral Roofing in Glendale, CA

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Roofing: The Glendale Owner’s Guide

Boral-compatible concrete and clay roof tile repairs in Glendale typically run $400 – $1,800, with a full tile roof replacement landing between $8,000 and $20,000 depending on pitch, tile profile, and how much of the underlayment has to come out. We install and repair Boral-profile roofing across Glendale, and we’ll give you a written line-item estimate before anything gets ordered. Different jobs, different timelines: a cracked-tile swap is often a single visit, while a replacement is scheduled work with permits pulled first.

Call (844) 560-4526

Owners usually find out something’s wrong the same way. A tile shows up in a planter bed after a windy night. A hairline crack spreads across the field of the roof above a valley. Or a slow brown stain shows on the ceiling after the second rain of the season and someone climbs a ladder to find the felt underneath is finished even though the tile on top looks fine. Boral tile is a strong product, but it’s a system – tile, underlayment, flashing, fasteners – and the weakest piece is usually not the tile itself.

Which Boral Models This Applies To

Boral makes two families of roof tile that matter here: concrete tile and clay tile. The concrete side includes the flat and low-profile profiles often used on mid-century Glendale homes – the Saxony family, the flat “shingle-style” profiles, and the ribbed lines that mimic shake. The clay side covers the Spanish and mission profiles, the barrel and S-tile lines that show up on older homes in Glendale neighborhoods like Adams Hill and Chevy Chase. We’re an independent service provider and not affiliated with Boral, so we match by profile, dimension, and color rather than by whatever the label says.

To identify what you have, take three things: a clear photograph of the tile from the ground or a safe ladder position, a measurement of one tile’s exposed width and length, and the color name off any original paperwork if you still have it. Tile profiles are not interchangeable – a Saxony field tile won’t fit a ribbed line, and the headlap and side-lap dimensions have to match or the roof leaks at every seam. Ask about the OEM-versus-aftermarket call before you buy. Boral original tiles are the safest match for color and dimension on a repair; a quality aftermarket concrete tile in the same profile can be a reasonable, cheaper answer for a hidden repair where color blending doesn’t matter. We don’t stock parts and we don’t carry tile on a truck – we source the right profile for your roof, which is why the photo and the measurement matter so much.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Roofing Is Failing

Here’s what actually walks us up a ladder in Glendale, and what’s usually behind it.

  • Cracked or broken field tiles. Hairline cracks show up after rapid heating and cooling, and a fully broken tile usually means something hit it or someone walked the roof wrong. One crack is a cheap fix; a pattern of them across one plane points to foot traffic or a settling issue underneath.
  • Tiles sliding out of line. When tile courses shift, the fasteners have usually corroded or the fastening pattern was too sparse. Los Angeles-area coastal air and decades of heat cycles are hard on nails and clips, and a tile that’s slipping can come off in the first Santa Ana wind.
  • Staining on the ceiling or attic decking. This is almost never the tile – it’s the underlayment or the flashing. Once the felt under a tile field fails, water runs down the deck until it finds a seam in the drywall below.
  • Granule or surface loss and color fade. Concrete tile sheds surface material over its service life, and clay can craze and spall. Color fade alone is cosmetic; exposed, chalky surfaces where the finish is gone are worth a look.
  • Loose or lifted flashing at valleys, vents, and the chimney. Flashing is where most real leaks start, and it’s the first thing we check when a Glendale owner reports water in the same spot every storm.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Glendale, a tile roof repair runs $600 – $2,500 depending on how many tiles and how much underlayment or flashing is involved. A full roof replacement is $8,000 – $20,000, and a metal roof installation if you’re switching materials runs $15,000 – $40,000. General roof repair across all materials sits at $400 – $1,800 for the smaller jobs.

What moves the number: roof pitch and how many stories we’re working at, how much of the underlayment has to be replaced versus reused, whether the flashing is salvageable, and the tile profile itself – barrel clay costs more to handle and breakage rates are higher than flat concrete. Our estimate is written line-item: tile, underlayment, flashing, labor, and disposal all shown separately, so you can see what you’re paying for. If the scope changes mid-job, that change arrives as a written change order before work proceeds, not as a surprise invoice at the end. Every completed job is backed by our written 90-Day Done Right Promise.

DIY or Call Us?

What you can safely do yourself: look from the ground, photograph the roof, check the attic for staining, and clear debris out of the valleys and gutters with a blower from a safe spot. All useful, and all free.

What we’d rather you didn’t do: walk a Boral tile roof yourself. This is the honest safety part. Concrete and clay tile crack under a footfall, and a broken tile can turn into a slip on a pitched roof in seconds. Roof work is one of the genuinely dangerous trades, and this is not a place to learn it. Replacing a tile also isn’t just swapping the piece – the fastening, the headlap, and the underlayment underneath all have to be handled correctly or the repair leaks worse than the original problem. If your roof is steep, two stories, or you’re not steady on a ladder, that’s our call to make, not yours. Call (844) 560-4526 and we’ll take a look – the estimate is free, and we’ll tell you honestly whether it’s a patch or something bigger. We also handle KraftMaid, Cambria, and Silestone work if a repair turns into a bigger project.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch