Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Kitchen Remodeling: The Glendale Owner’s Guide
Kitchen remodeling in Glendale runs $14,000 to $45,000 installed, and that range covers cabinet work, Boral surface elements, countertops, and finish carpentry done to permit. We install Boral products and the compatible materials that go with them, and we schedule free estimates within a few days, not weeks. Most Glendale owners find us the same way: a cabinet face has gone chalky, a Boral countertop edge has chipped at the sink, or a section of backsplash has started lifting behind the cooktop after a few wet winters. They call because a small failure tells them the whole kitchen is due for a look. That’s the right call, and it’s the one this page is built around.
Key Takeaways
- Boral is a brand name that shows up across several surface and cladding lines, not a single product. Match the exact line before you order anything.
- Installed kitchen remodeling in Glendale runs $14,000 to $45,000, with smaller kitchens landing in the $9,000 to $20,000 band.
- Sealing and edge detail fail before the panel itself does. That’s a repair, not a replacement, in most cases.
- We pull permits and write every price change down before work moves. You see the number before you sign it.
Which Boral Models This Applies To
Boral makes engineered stone surfaces, and the brand also shows up on siding, trim, and brick facing. That matters here because “I have a Boral kitchen” could mean a Boral countertop, a Boral-branded backsplash panel, or a Boral surface used as a windowsill or interior trim piece in the kitchen. Before anyone orders a replacement, we look at the back edge of the panel, the underside of the counter overhang, or the stamped label on the cabinet face. Boral typically prints the line name and a batch code there. A batch code is the useful part: matching two panels from different batches can give you a visible color shift that no amount of good installation hides.
On OEM versus aftermarket for Boral specifically: if the piece is still under a manufacturer warranty, going OEM keeps that warranty intact. If it’s not, a quality compatible surface from a line we already install gets you the same look at a lower material cost. We also work with KraftMaid, Cambria, and Silestone on the cabinet and counter side, so we can tell you honestly whether matching the Boral piece is the right move or whether you’re better off replacing that section with a compatible line. Barrett & Sons Construction Glendale is an independent service provider, not affiliated with Boral. We install their products because they hold up, not because anyone is paying us to say so.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Kitchen Remodeling Is Failing
- Chalking or a dull haze on the surface. This is UV and moisture reacting with the finish. Common on kitchen surfaces that catch afternoon sun through an east-facing window.
- Chipping at an inside corner or the sink cutout. Usually from an edge that was never properly supported during the original install. A thin section with no backing will fail at the first heavy pot.
- Lifting or gapping along the backsplash seam. Caulk shrinking after a dry summer followed by a wet winter. Glendale gets both, and it moves the seam every year.
- Discoloration near the cooktop or under the window. Heat and sun exposure. Boral surfaces hold color well, but no engineered surface is immune to years of direct heat.
- A soft spot or hollow sound when you tap the counter. The substrate underneath has failed, not the Boral panel itself. This one needs a look before it cracks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest pricing for a kitchen job in Glendale, straight from what we quote:
- Full kitchen remodel: $14,000 to $45,000
- Small kitchen remodel: $9,000 to $20,000
- Cabinet installation: $4,000 to $13,000
- Countertop installation: $2,000 to $6,500
- Backsplash installation: $800 to $2,500
- Kitchen island installation: $3,000 to $10,000
What pushes you toward the top of that range: full cabinet replacement, a re-plumbed sink location, or a surface that needs a custom edge profile. What keeps it at the bottom: replacing a single counter section or one backsplash run. Every quote breaks out materials and labor separately, and any scope change comes to you as a written change order before a single cut is made. The work is backed by our 90-Day Done Right Promise in writing.
DIY or Call Us?
Some things you can safely check yourself. Look at the label on the back of a Boral panel. Tap gently along the counter to find a soft spot. Measure the width and depth of the section that failed. That information helps us quote faster.
What we don’t recommend doing yourself: cutting or removing an installed Boral panel. Engineered stone dust is a real respiratory hazard, and the material is heavier than it looks. A single misjudged cut on a $400 panel isn’t a learning experience, it’s a wasted purchase. Leave the cutting and the removal to us. If you’re unsure whether your piece is a repair or a replacement, call (844) 560-4526. We’ll tell you straight, and the estimate is free.
FAQs
Ten to fifteen years is realistic with proper sealing and edge care in our climate. Glendale’s dry summers and wet winters work the seams hard, so resealing every two to three years is the difference between a fifteen-year surface and a ten-year one. Call (844) 560-4526 for an inspection if your surface is in that age range.
Often, yes. A chipped edge or a failed seam is usually a repair, not a full replacement, and that keeps your cost closer to the backsplash range of $800 to $2,500. A cracked or discolored panel is a replacement. We’ll tell you which one you’re looking at before you spend anything.
A single counter or backsplash section is typically one to two days on site. A full kitchen remodel with cabinets and surface work runs three to six weeks depending on permit and inspection timing. Every timeline we quote gets written down, and every change gets a written change order.
We source Boral and compatible surfaces directly from the manufacturer or an authorized distributor, matched by line name and batch code where possible. We don’t carry stock on a truck and we don’t claim to. You get the exact part your kitchen needs, ordered and verified, with the paperwork in your file.
If you’re in Glendale and your kitchen is due for a look, call (844) 560-4526 for a free estimate. We’ll bring the written numbers, pull the permits, and back the work with the 90-Day Done Right Promise. Ask anyone on your street, or look up the license yourself.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.