Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing: The Glendale Owner’s Guide
PGT roofing components on a Glendale home are most often replaced as part of a full roof system or a targeted repair, with roof repair running $400 – $1,800 and a full roof replacement running $8,000 – $20,000 installed. We schedule these as planned jobs, not same-day emergencies, and every estimate is free and written line by line. Owners usually find the problem after a wind event or the first real storm of the season: a lifted edge, granules collecting in the gutter, or a stain blooming on a ceiling in the back bedroom.
Which PGT Models This Applies To
PGT makes windows and doors, not roofing shingles, so the first thing we do on a Glendale call is identify what the homeowner actually has up top. In practice, PGT-branded products on a Glendale roof are usually skylights, roof windows, or the flashing kits and curb components tied to them. PGT’s impact-rated glass lines show up often on Glendale homes because of wildfire-zone and wind-driven rain requirements, and those units carry a rating label on the frame or the glass edge.
To match the right replacement part, look for three things: the label on the interior frame or sash (it lists the series and the glass build), the rough opening measurement taken at the curb, and the date stamp. A common gotcha: PGT skylight curbs are built to a nominal size that doesn’t match the frame you measure from inside, so a “28-inch” unit can need a 2×8 curb built to 30 inches. Measure the opening, not the old glass.
On the OEM-versus-aftermarket call, we’re plain about it. For glass and frame assemblies, we source the PGT-compatible part because the seal, spacer, and impact rating are tied to the original build. For flashing, curb caps, and sealants, a quality aftermarket equivalent is fine and often cheaper. We carry no parts inventory and no parts on a truck; every part is ordered to your unit. Barrett & Sons Construction Glendale is an independent service provider and is not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
- Granules in the gutter and downspout. The shingle surface is shedding its protective mineral layer, which means the asphalt underneath is aging faster than the roof’s remaining life suggests. In Glendale’s UV load, that happens sooner on south- and west-facing slopes.
- A ceiling stain or damp drywall near the skylight or roof window. The curb flashing has usually failed at the sealant joint or the head flashing has lifted. Water tracks along the framing and shows up feet away from the actual leak.
- Cracked or fogged glass in a PGT roof window. The insulated glass seal has broken and moisture is trapped between panes. Once fogging starts, the unit’s insulating value is gone and replacement is the fix.
- Lifted or curling shingle edges after a Santa Ana wind event. Adhesive strips have released, and the next rain drives water under the course. We see this most on older roofs along the foothill edges of Glendale where wind funnels through canyons.
- Visible daylight or a soft spot around the skylight curb. The curb framing or the decking around it has taken on water and started to soften. This one needs a look before the next storm, not after.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what Glendale homeowners actually pay, installed, with labor and materials broken out in the written estimate:
- Targeted roof repair (including skylight or roof window flashing): $400 – $1,800
- Tile roof repair: $600 – $2,500
- Full roof replacement: $8,000 – $20,000
- Metal roof installation: $15,000 – $40,000
The range moves on roof size, pitch, how many layers have to come off, whether the decking is sound, and the cost of the specific PGT-compatible glass or frame unit. Parts and labor are listed separately so you can see exactly what the part costs. Every price change comes as a written change order before anyone touches the roof. The work is backed by our 90-Day Done Right Promise, and if something’s off, one call brings us back.
DIY or Call Us?
Some things you can safely check yourself. Look at the ceiling for stains after a rain, note granules in the gutter, and take a photo of the PGT label on the frame so you know the series. What you should not do is get up on the roof to reseal flashing or swap a skylight unit yourself. Roof work means height, and a fall from a two-story Glendale roof is a serious injury. Impact-rated glass units also weigh more than people expect.
The other reason to call: a flashing repair done wrong in Glendale’s rainy season means the leak comes back inside the wall, and now it’s a drywall and framing job. Our crew members are background-checked and we pull permits and pass inspections on every eligible job. Call (844) 560-4526 and we’ll take a look and give you a written, no-hassle estimate.
FAQs
Plan on roughly 15 – 25 years for the glass and frame on a PGT roof window, and 20 – 25 years for a standard asphalt shingle roof in Glendale’s climate, with the sun-facing slopes going first because of the UV load. Tile and metal run longer. Heat and UV, not rain, are what age a Glendale roof fastest.
Often, yes. A failed flashing seal or a single cracked pane is a repair, not a new roof. We won’t sell you a replacement when a targeted repair will hold. Call (844) 560-4526 and we’ll tell you straight which one you need – estimates are free.
A flashing repair or a single glass unit swap is usually a one-day job. A full roof replacement on a typical Glendale home runs several days depending on size and weather. We give you the schedule in writing before we start.
We measure the rough opening and read the label, then order the PGT-compatible part to that unit – we don’t keep parts in stock or on a truck. That’s how you get the right fit instead of a close-enough guess. Call (844) 560-4526 for your free estimate.
Whether it’s PGT up top or KraftMaid, Cambria, or Silestone inside, we treat every job the same: scope in writing, permits pulled, change orders before the work moves. Call Barrett & Sons Construction Glendale at (844) 560-4526 for a free estimate. Proudly serving Glendale and nearby areas for over 29 years, and you can look up our license number yourself before you sign anything.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.