A Barrett company - serving Glendale, CA

CGI Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Driveway & Pavers: The Glendale Owner’s Guide

We install CGI-compatible driveway and paver systems across Glendale, and a full paver driveway typically runs $7,000 – $18,000 installed, while driveway replacement with proper base work lands at $5,000 – $14,000. Driveway sealing to protect an existing surface is much smaller, usually $250 – $700. We’re an independent service provider and not affiliated with CGI.

Call (844) 560-4526

Owners usually spot the problem before it becomes a safety issue. A paver pops loose after a heavy rain and won’t seat back down. The joints start washing out, and sand runs into the gutter with every storm. Or a slab driveway cracks along a straight line that gets wider each season. In Glendale, we see this most on north-facing drives that stay damp through winter and on older sunken drives where the compacted base was never rebuilt when the pavers first went down. That base failure, not the paver itself, is what you’re really dealing with.

Which CGI Models This Applies To

CGI makes a range of paver and driveway products, and matching the right one comes down to identifying exactly what’s already on your property. The fastest way to get it right is to pull a spare paver if you have one, or measure a full paver and note the color, finish, and edge profile. CGI catalogs its pavers by nominal face dimensions, thickness, and finish series, and those details are what let us match a replacement to what you have. Many driveways installed more than 15 years ago use a slightly different thickness or color lot than what’s sold today, and a mismatched thickness will flex out of the bedding within a season.

The OEM question is real here. A genuine CGI paver matched to your existing course keeps the joints tight and the color consistent; a close aftermarket equivalent can be fine for repairs out of sight, but on a visible driveway the color and texture drift tends to show. Where CGI’s current run doesn’t match an older lot, we’ll tell you straight and walk through your options rather than pretend a different color is the same. We also service KraftMaid, Cambria, and Silestone on the interior side, though that’s a separate conversation. If you’re unsure which CGI product you have, bring a photo and a measurement to the estimate and we’ll sort it out.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Driveway & Pavers Is Failing

  • Pavers rocking or rocking loose. A paver that moves underfoot means the bedding sand or base below it has shifted, usually from poor drainage rather than the paver failing. Fix the paver alone and the movement returns.
  • Sand washing out of the joints. Joint sand escaping after rain signals either missing edge restraint or water running across the surface. Left alone, the joints open wider and the pavers start to spread.
  • Heaving or uneven surface. This is almost always water trapped under the base, and in Glendale it shows up on drives that don’t drain toward the street. It needs the base addressed, not just the top course.
  • Cracks along a straight line. On concrete driveways, a straight-running crack often follows a control joint or a cold seam from the original pour. It widens with seasonal movement.
  • Efflorescence and dull staining. White chalky bloom or dark patches mean moisture working through the surface. Sealing slows it, but you want the drainage checked first.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what the work runs in Glendale, using the same numbers we quote across the site. These are installed prices, so base prep, materials, and labor are bundled in unless noted.

  • Paver driveway installation: $7,000 – $18,000
  • Concrete driveway installation: $4,500 – $12,000
  • Asphalt driveway paving: $3,500 – $9,000
  • Driveway replacement: $5,000 – $14,000
  • Driveway sealing: $250 – $700

What moves the number is square footage, how much of the old base has to come out, and whether the grade needs reworking to drain properly. On a true repair rather than a full replacement, we’ll price the section and tell you if patching the rest is throwing money away. Every scope and allowance arrives in writing, and any price change comes as a written change order before work starts. The finished job is backed by our written 90-Day Done Right Promise: if it isn’t right, you call and we come back.

DIY or Call Us?

Some of this you can check yourself without risk. Walk the drive after rain and look for low spots, watch where water runs, and see if joints are holding sand. Pull on a loose paver gently to feel whether it’s the paver or the base that’s moving. Those observations are useful and they’ll tell you a lot.

Where DIY goes wrong is the base. Tamping a paver back into old sand without fixing drainage or restraint is a temporary patch that fails by the next wet season, and lifting a whole course to rebuild a sub-base is heavy work that’s easy to get wrong with a hand tamper. There’s no high-tension or electrical danger here, just the reality that a badly rebuilt base costs more to fix later. If the movement is broad or the drainage is off, call us at (844) 560-4526 and we’ll take a look. Estimates are free.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch