A Barrett company - serving Glendale, CA
C

CWS Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CWS Driveway & Pavers: The Glendale Owner’s Guide

If your CWS driveway or paver system on a Glendale property is cracking, heaving, or draining wrong, the fix usually runs $7,000 – $18,000 for a full paver driveway install, $4,500 – $12,000 for concrete, and as little as $250 – $700 for a reseal – and we can usually get a written estimate to you within a day or two. We install and repair CWS-compatible driveway and paver systems throughout Glendale, pull the permits when the job needs them, and put every dollar on paper before work starts.

Call (844) 560-4526

Most owners find out something’s wrong the same way: a hairline crack shows up after a hot Glendale summer, a paver lifts near the driveway apron, or water starts pooling against the garage instead of running to the street. By the time it’s visible, the base has often been working against you for a season or two.

Key Takeaways

  • Glendale’s clay-heavy soil and summer heat are hard on paver bases and concrete slabs – base failure is more common than surface wear.
  • Match the CWS system to thickness, joint sand, and edge restraint before you buy anything.
  • Concrete and paver driveways are long-term investments; skim fixes cost more over time.
  • Written scope, written change orders, permits pulled. No guesswork at the door.

Which CWS Models This Applies To

CWS hardscape systems aren’t a single product line – they range from interlocking concrete pavers to permeable and slab-style units, and the correct replacement depends on which system is already on your Glendale driveway. Before anyone quotes you, we need three things: the thickness of the existing paver or slab, the joint detail (sand-filled, polymeric, or tight-joint), and the edge restraint style at the driveway apron and against the garage slab.

On most Glendale driveways we see 2 3/8-inch and 2 3/4-inch paver units. A 60mm base paver and an 80mm drive-rated paver are not interchangeable under vehicle load, and mixing them is one of the fastest ways to get a section that fails in two summers. If the label is gone or painted over, we measure the unit in place, note the joint pattern (running bond, herringbone, basketweave), and match from there.

OEM CWS pavers keep the color and size consistent with what’s already down; quality aftermarket equivalents can save money when the original color has been discontinued, as long as the thickness and compressive rating match the drive-rated spec. We’re an independent contractor and not affiliated with CWS – we install and repair CWS-compatible systems and match parts to the existing install.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CWS Driveway & Pavers Is Failing

  • Hairline cracks spreading across slabs or paver faces. Usually heat-cycling and base movement rather than surface wear – Glendale summers push 100°F and the slab expands and contracts against a base that’s shifting underneath it.
  • Paver heave or rocking when you step on it. The joint sand has washed out and the base has settled. Vehicle traffic finishes the job quickly.
  • Water pooling against the garage or along the apron. Slope or drainage has drifted out of spec, and repeat ponding is the leading cause of foundation-adjacent damage we see in Glendale.
  • Joint sand washing out after rain. Polymeric sand that’s failing or was never installed correctly lets water into the base, and the base is where driveway failures actually start.
  • Efflorescence or a white haze that keeps coming back. Moisture is trapped in the slab or base and evaporating through the surface – a reseal won’t fix it if the water source isn’t addressed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what CWS-compatible driveway work runs in Glendale, installed:

  • Paver driveway installation: $7,000 – $18,000
  • Concrete driveway installation: $4,500 – $12,000
  • Asphalt driveway paving: $3,500 – $9,000
  • Full driveway replacement: $5,000 – $14,000
  • Driveway sealing: $250 – $700
  • Paver patio installation: $3,500 – $11,000

The range depends on square footage, base prep depth, whether the old surface has to be torn out and hauled, drainage corrections, and the paver series itself. We quote parts and labor as separate line items so you can see exactly what you’re paying for. Every eligible job gets permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise: if it isn’t right, Tom comes back and makes it right, one call.

DIY or Call Us?

You can safely check a few things yourself: measure the paver thickness, note whether the sand in the joints is loose or compacted, watch where water runs during a hose test, and photograph any crack longer than a foot. That’s useful information for a quote.

Where DIY goes wrong is under the surface. Tearing out a paver field to fix one settled section and re-bedding it on an uncompacted base looks fine for a season and then fails again – and by then you’ve paid twice. Slab replacement, base compaction to drive-rated spec, and drainage correction behind a garage slab are jobs for a crew with proper equipment, not a Saturday rental.

If you’re not sure which side of that line you’re on, call us at (844) 560-4526 and describe what you’re seeing. We’ll tell you honestly whether it needs a repair or a full replacement.

FAQs

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch