Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Fence Installation: The Glendale Owner’s Guide
We install ES Windows-compatible fence systems in Glendale at $3,500 to $9,000 installed, depending on fence type and run length. Vinyl and aluminum fence installation both fall inside that range, and we schedule it as planned work with a written scope, not a same-day emergency call. Most owners discover the problem the same way: a gate that used to close with one hand now drags, a post starts leaning toward the neighbor’s yard after a wet winter, or a panel near a sprinkler head has gone chalky and brittle.
- Key Takeaways: Fence work in Glendale runs $3,500 to $9,000 installed.
- Every job gets a written scope and written change orders before work moves.
- Permits are pulled on eligible fence work, and inspections are signed.
- We’re an independent contractor, not affiliated with ES Windows.
Which ES Windows Models This Applies To
ES Windows and doors are common on Glendale homes from the 1990s forward, and a lot of those same properties have matching exterior fence and gate hardware packages from the same era. When we quote a fence installation for a Glendale owner with an ES Windows home, we’re matching the fence system to the property’s existing gate hardware and to the window and door trim colors that were factory-finished, so the fence doesn’t fight the house.
Here’s how to identify what you have. Look on the inside face of your gate hinges and latch for a stamped logo. Measure the gate post spacing and gate leaf width in inches. Fence hardware is not the same as window hardware, and a replacement gate kit has to match both the post thickness and the hinge swing direction.
On the OEM-versus-aftermarket decision, our honest read: for gate hinges and latches, a quality aftermarket equivalent in the same finish grade is usually the smarter buy. For factory-matched trim and color finishes, OEM is worth the wait. Glendale’s sun load fades cheap finishes fast, so we steer toward UV-stable powder-coated and vinyl components.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Fence Installation Is Failing
- Gates that drag or won’t latch. Post movement or hinge wear. If the post tilts, the hinge is the symptom, not the cause.
- Leaning or wobbly posts. Usually footing failure or soil movement. Glendale clay and our dry-then-flooding winters punish shallow footings.
- Chalky, sun-bleached panels. UV breakdown from our summer sun. Vinyl goes brittle and can crack at the fastener holes.
- Rust streaks on hinges and latches. Galvanized hardware at the end of its life. Cosmetic early, structural later.
- Sagging gate leaf or dropped corner. Hardware fatigue plus post settling. Left alone it pulls the whole gate panel out of square.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed fence work in Glendale runs $3,500 to $9,000. Vinyl fence installation lands at $3,500 to $9,000. Aluminum fence installation runs $4,000 to $10,000. What drives the number: total run length, post count, gate quantity and size, whether old fence and footings come out, and how much grading we do along the line.
What’s in the quote:
- Written scope with run length, post spacing, and gate count spelled out
- Material list by brand and finish grade, so you can look it up
- Removal and haul-away of the old fence where needed
- Footings dug and set to code
- Permits pulled and inspections signed on eligible jobs
Any price change arrives as a written change order before a single post goes in. The completed job carries our written 90-Day Done Right Promise: if something’s off, one call brings us back to make it right.
DIY or Call Us?
What you can safely check yourself: walk the line and note every leaning post, test each gate latch, photograph the hinge and latch stamps for a replacement match, and measure post spacing. That’ll tell you if you’re looking at a hinge swap or a failed footing.
Where DIY goes wrong: post footings. A fence post set too shallow in Glendale soil will lean again within a season, and by then you’ve buried money in materials. Pulling and resetting footings is heavy, back-bending work, and it’s easy to damage a neighbor’s line or hit a sprinkler run. On gates, a badly sized hinge kit will torque the post and pull it out of plumb.
We do this work with crew members carrying the Barrett & Sons name, and we’ll tell you straight whether you need a hinge swap or a footing job. Call (844) 560-4526 for a free estimate.
FAQs
Plan on 15 to 20 years for a quality vinyl or aluminum fence with UV-stable finishes and properly set footings. Our sun is hard on anything cheap, and footings set too shallow are what cut that lifespan short, not the material. Call (844) 560-4526 for an exact quote, and estimates are free.
Often yes. A single failed hinge, a loose latch, or one leaning post can be repaired without a full replacement. We inspect the line and tell you honestly which it is. Call (844) 560-4526 to schedule a free estimate.
Most residential runs take 2 to 5 working days, gate hardware and footings included. Heavy removal or grading stretches it. Your written scope lists the schedule before we start. Call (844) 560-4526 for a free estimate.
We identify your existing gate hardware from the stamps and measurements, then match it to an OEM or quality aftermarket equivalent in the correct finish and swing direction. You’ll see the part and finish grade in writing before we order. Call (844) 560-4526 for a free estimate.
We also install kraftMaid, Cambria, and Silestone materials on the interior side of the same Glendale homes, if your project grows past the fence line.
Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.