A Barrett company - serving Glendale, CA
E

ES Windows Driveway & Pavers in Glendale, CA

Driveway & paversDriveway & pavers
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Driveway & Pavers: The Glendale Owner’s Guide

We install ES Windows-compatible driveway and paver systems in Glendale, and a typical paver driveway runs $7,000 to $18,000 installed; a concrete driveway runs $4,500 to $12,000, and most planned installations are scheduled within a week or two, not the same day. Owners usually discover the failure slowly. A paver near the garage apron rocks underfoot when you walk to the car in the morning. A hairline joint that was tight last spring opens to a quarter inch by August. Water starts puddling against the garage slab after a rain instead of running to the street, and that puddle is the first sign the base under the pavers has shifted. By the time you can see it, the problem has usually been working under the surface for a season or two.

Call (844) 560-4526

We’re Barrett & Sons Construction Glendale, an independent contractor. We work with ES Windows products and paver and driveway systems from Belgard and Techo-Bloc, and we’re not affiliated with ES Windows. You can look up our license number before you call, and we’d rather you did.

Key Takeaways

  • Puddling, rocking pavers, and open joints are the three most common failure signs in Glendale.
  • Most ES Windows paver driveways in this area are affected by clay soil movement and seasonal heat expansion.
  • Installed paver driveway cost in Glendale: $7,000 to $18,000. Sealing runs $250 to $700.
  • Full replacement isn’t always the answer. We’ll tell you when a repair makes sense and when it doesn’t.

Which ES Windows Models This Applies To

ES Windows paver and driveway systems cover several series, and the exact base, edge restraint, and joint sand specification differs between them. The compatible edge restraint profile matters most on replacement jobs, because the wrong one lets pavers creep toward the street after a few freeze-thaw cycles. To identify your system, look for the ES Windows stamp on the paver undersides (usually visible at the driveway edge where pavers meet the apron or a planter), measure your field pavers across the face, and check the base depth at any exposed edge where you can dig down a few inches. Most residential installations in Glendale use a 4- to 6-inch compacted base; if yours was built shallower, that explains the movement you’re seeing.

For OEM replacement pavers, ES Windows can supply color-matched units for current series. Older series sometimes require aftermarket pavers in a near-match color. We’ll show you samples before you commit, because a dye lot mismatch shows up badly on a sunny Glendale driveway. We don’t stock parts and we don’t carry pavers on a truck. Every unit is ordered to spec for your job, which means the color and dimensions are right rather than close.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Driveway & Pavers Is Failing

  • Pavers rock underfoot. Movement means the sand bedding has washed out or the base has settled. In Glendale, the clay-heavy soil under many older driveways swells in winter rain and shrinks in summer heat, and that cycle works the bedding loose.
  • Joint sand washes out after rain. If sand disappears from joints every season, the joint profile or the edge restraint is wrong. Properly set pavers hold their joint sand for years; repeated washout means the system is moving.
  • Puddling against the garage slab or at the street. Water sitting where it shouldn’t means the driveway has lost its slope. A driveway that drained fine two years ago and now ponds is telling you the base has shifted, not just the surface.
  • Open joints developing a gap wider than 1/4 inch. Gaps that wide let water straight into the base, which accelerates settlement. Once water gets under the pavers, the failure speeds up.
  • Chipped or spalled paver edges along the apron. Impact from tires on a wobbly paver chips the edges over time. If you’re seeing the same paver chipped two or three years in a row, the base under it has failed.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here’s what paver and driveway work runs in Glendale, installed, with parts and labor shown together rather than split into a labor surprise at the end:

Job Installed Range
Paver driveway installation $7,000 – $18,000
Concrete driveway installation $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Driveway replacement $5,000 – $14,000
Driveway sealing $250 – $700
Paver patio installation $3,500 – $11,000

The range depends on square footage, base depth, whether the old surface needs removal, and which paver series you choose. That’s why the range is wide: a 400-square-foot driveway in a standard series is a very different job from an 800-square-foot driveway in a premium Techo-Bloc line that needs a deeper base. Every scope, allowance, and price change arrives as a written change order before work starts. The finished job carries our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.

DIY or Call Us?

You can safely check a few things yourself. Walk the driveway and mark rocking pavers with chalk. Dig a small test hole at an edge where the base is exposed and measure its depth. Take a photo of the ES Windows stamp on a paver underside. Check whether water ponds after the next rain. Those three pieces of information will tell us most of what we need before we visit.

What goes wrong with DIY here is the base. Lifting pavers, re-sanding the joints, and re-laying them looks easy and usually fails within one rainy season because the base under them was never the problem the homeowner fixed. Getting base compaction right takes plate equipment most homeowners don’t own, and a driveway that fails again after you’ve paid for pavers twice is an expensive lesson. Call (844) 560-4526 to schedule a free estimate. We’ll tell you honestly whether sealing ($250 to $700) is enough, whether a partial repair makes sense, or whether replacement is the better spend.

FAQs

How long do ES Windows pavers last in Glendale? ES Windows pavers typically last 25 to 30 years or more when the base is properly built and joints stay filled. The failure that shortens lifespan in Glendale is water intrusion into the base, not the paver itself. Keep joints filled and seal every few years and you’ll get the long end of that range. Call (844) 560-4526 for a free estimate if your joints are already washed out.

Can my paver driveway be repaired instead of replaced? Often, yes. Rocking pavers, washed-out joints, and minor settlement can be lifted, re-based, and re-laid for a fraction of replacement cost. If the base failure is widespread, repair won’t hold and we’ll tell you so. Call (844) 560-4526 and we’ll give you a straight answer on which one you’re looking at.

How long does a paver driveway installation take? A typical Glendale paver driveway takes three to five working days, depending on square footage and base conditions. Old surface removal and base prep account for most of the time; setting the pavers is the fastest part. Call (844) 560-4526 to schedule your free estimate and we’ll give you a timeline specific to your driveway.

How do you source ES Windows paver parts? We order OEM ES Windows units for current series through the manufacturer, and aftermarket units from Belgard or Techo-Bloc when the series is discontinued or the match is better. You’ll see samples and a written line-item quote before anything is ordered. Call (844) 560-4526 for a free estimate. We also work with KraftMaid, Cambria, and Silestone on interior projects, so if the same trip can cover more than one job, it can.

Barrett & Sons Construction Glendale has been owner-operated since 1998, and our technicians have up to 28 years of experience. Driveway and paver work starts with a written scope, includes permits pulled and inspections signed where required, and finishes with the 90-Day Done Right Promise. We publish our license number because we want you to check it. Call (844) 560-4526 to schedule your free estimate. A live person answers, day or night, and no trip charge applies inside the county.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch