A Barrett company - serving Glendale, CA
E

ECO Window Systems Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ECO Window Systems Bathroom Remodeling: The Glendale Owner’s Guide

ECO Window Systems bathroom remodeling in Glendale typically runs $9,000 – $28,000 installed, depending on the scope, fixtures, tile, and whether the job touches plumbing or electrical. We’re an independent service provider and are not affiliated with ECO Window Systems, but we work on these bathrooms regularly and quote them honestly. Most Glendale owners find out something’s off the same way: a shower that won’t drain, a vanity that’s pulling loose from the wall, a tub surround that’s soft behind the tile, or caulk that keeps reappearing with more black behind it each month. That’s the moment you stop guessing and start pricing.

Call (844) 560-4526

Key Takeaways

  • ECO Window Systems bathrooms in Glendale run $9,000 – $28,000 installed, with small bathrooms at $5,000 – $12,000.
  • Water damage in tile and frameless glass assemblies rarely shows itself until the drywall behind it swells.
  • Every eligible bathroom job we take gets permits pulled and inspections signed.
  • Our technicians have up to 28 years of experience, and every scope, allowance, and price change arrives as a written change order before work happens.

Which ECO Window Systems Models This Applies To

ECO Window Systems is best known for its vinyl and aluminum window and door lines, and its bathroom assemblies show up most often in remodeling packages where glass, frameless shower enclosures, and interior doors are matched to the brand. That matters here: when a Glendale owner calls and says “my ECO bathroom,” we need the model line, not just the brand, because the glass thickness, hinge spacing, door track replacement parts, and the rough opening specs vary by series. We confirm the model from the label inside the enclosure frame, the sticker on the interior door panel, or the original invoice in the closing packet.

Here’s the compatibility gotcha most owners miss: older ECO shower door tracks use a 3/8-inch tempered glass panel on a deeper bottom track channel than the current line, and the hardware doesn’t swap across. If you’re replacing rollers, hinges, or a pivot, matching the panel thickness (3/8″ vs 1/2″) and the track profile is the whole ballgame. Where a current ECO part isn’t available, a quality aftermarket equivalent usually works, but only if the glass thickness and pivot spacing are verified first, not guessed. We don’t stock parts and we don’t carry parts on a truck, but we can source the right one and tell you honestly whether it’s worth it. KraftMaid, Cambria, and Silestone show up in the same bathrooms, so we spec against the full job, not just the glass.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ECO Window Systems Bathroom Remodeling Is Failing

  • Water pooling at the shower door base. The bottom track seal or a worn door sweep has failed, and water is tracking under the glass. Fix it early and it’s a seal; wait and it’s the drywall behind the tile.
  • Hinges that sag or bind. Frameless glass hinges and pivot hardware wear out at the bushings first. Once the panel drops more than a quarter-inch, the hinge is the culprit, not the door.
  • Black or pink staining along the caulk line. That’s mold feeding on chronically wet substrate, usually behind a tile or bead that’s been re-caulked twice. The caulk is a symptom, not the problem.
  • Soft or springy floor tile near the shower. Water is getting under the tile through failed grout or a missing curb, and the subfloor or backer is absorbing it. This is the point where the job goes from repair to remodel.
  • A vanity that rocks or pulls away from the wall. Fasteners working loose against drywall or a shallow stud is common in tighter Glendale baths, where the stud bay is narrower than the cabinet’s mounting rail.

Replacement Cost & What’s Included

A full ECO Window Systems bathroom remodel in Glendale runs $9,000 – $28,000, and a small bathroom remodel runs $5,000 – $12,000. What drives the range: glass and enclosure specs, tile selection, vanity and fixture brands, whether the shower is a walk-in ($4,500 – $12,000) or a tub-to-shower conversion ($3,500 – $10,000), and whether we’re moving plumbing or electrical. A shower replacement alone runs $3,000 – $8,500, and a bathroom vanity installation runs $800 – $3,000.

Scope Installed Range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

Every job is quoted with parts and labor broken out on the estimate, not lumped. Every price change arrives as a written change order before work proceeds. Every completed job is backed by our written 90-Day Done Right Promise, and permits are pulled and inspections signed on every eligible job. Ask for a second opinion on any written estimate and we’ll give you one free.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check a few things yourself: look at the glass panel thickness (3/8″ vs 1/2″) before ordering any hardware, confirm the model on the frame label, run a level across the top of a sagging door panel, and re-caulk a joint that’s still clean and dry behind it. What you shouldn’t tackle alone is anything behind the tile or under the floor. Water damage looks cosmetic until you pull a tile and find soft backer board, and a frameless glass panel is heavy and tempered: a dropped panel shatters into a thousand pieces, and a panel that’s off its hinge track can fall on someone. That’s when you call us at (844) 560-4526 for a free estimate.

FAQs

Schedule Your Free Estimate

If your Glendale bathroom is showing any of these signs, or you’re ready to price a full remodel, call Barrett & Sons Construction Glendale at (844) 560-4526. We’re a name you can verify: our technicians have up to 28 years of experience, our crew members are background-checked, and every eligible job gets permits pulled and inspections signed. A live person answers 24/7, we offer a free second opinion on any written estimate, there’s no trip charge inside the county, and we honor a permanent 10% Senior & Veteran discount. Get the free estimate before you sign anything, and ask for the price in writing.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch