A Barrett company - serving Glendale, CA
M

Mr-Glass Bathroom Remodeling in Glendale, CA

Bathroom remodelingBathroom remodeling
Kitchen remodelingKitchen remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Bathroom Remodeling: The Glendale Owner’s Guide

Mr-Glass bathroom remodeling in Glendale typically runs $9,000 to $28,000 installed, depending on whether you’re doing a full gut, a shower-only upgrade, or a vanity-and-tile refresh. We’re an independent service provider working with Mr-Glass materials – not affiliated with the brand itself – and we quote every scope line by line before work starts. If you’re already holding a Mr-Glass shower door, enclosure, or vanity spec sheet and something has failed, you’re in the right place.

Call (844) 560-4526

Most homeowners in Glendale discover a problem the same way: the shower door starts dragging on the curb, water shows up where the enclosure meets the tile, or the glazing looks cloudy in a way no cleaner fixes. That’s usually when the phone comes out and the search begins.

Key Takeaways

  • Full Mr-Glass bathroom remodel in Glendale: $9,000 – $28,000. Shower replacement alone: $3,000 – $8,500.
  • Parts fail on a predictable schedule here because of Glendale’s hard water and summer heat cycling.
  • We verify your exact Mr-Glass model before ordering anything, so the part actually fits.
  • Failed glass and door hardware is not a DIY job – tempered glass and enclosure tension cause real injuries.

Which Mr-Glass Models This Applies To

Mr-Glass has shipped a lot of product lines into Southern California over the years, and the parts aren’t interchangeable between them. Frameless enclosure series have different hinge geometries than semi-frameless models. A shower door roller from one line won’t seat in a track from another. Before we order a single piece of hardware, we need to know what you have.

Here’s how to identify it. Look for the manufacturer label on the enclosure frame, inside the door jamb, or on the underside of the header rail – Mr-Glass typically prints the series and a model code there. If the label is gone or faded, we measure the door thickness (frameless doors are commonly 3/8 inch; some are 1/4 inch), track depth, and the hinge spacing, and match those to the current Mr-Glass parts catalog.

On OEM versus aftermarket: for structural components (hinges, pivot pins, header brackets) we strongly prefer genuine Mr-Glass parts. The metal alloy and tolerance matter on a door that swings. For cosmetic or low-load pieces – seals, sweeps, towel bars – a quality aftermarket equivalent is fine and often less expensive. We’ll tell you which is which before we order.

This same model-matching discipline applies to the rest of the room. We source KraftMaid cabinetry, Cambria and Silestone surfaces, and premium fixtures from brands that publish full spec sheets. No mystery parts off a van.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Bathroom Remodeling Is Failing

A Mr-Glass enclosure or vanity component doesn’t usually fail all at once. It gives you warnings. These are the five we see most often in Glendale homes:

  • The door drags or won’t stay shut. Worn rollers or a hinge that has lost tension, usually from mineral buildup on the track. Hard water in Glendale accelerates this noticeably.
  • Water leaks at the frame or curb. A failed sweep, a cracked gasket, or caulk that has dried out after several summers of expansion and contraction.
  • Cloudy or etched glass. Glendale’s water is high in dissolved minerals, and tempered shower glass etches over time. No amount of vinegar reverses it – this is a replacement, not a scrub.
  • A hinge pulls loose from the wall or frame. The mounting hardware has stripped or the glass-to-wall anchorage is compromised. That means the door is holding on borrowed time.
  • The vanity or mirror hardware sags. Cabinet hinges loosen, drawer slides wear, and mirror mounts loosen as the wall assembly settles. Sometimes it’s just the hardware; sometimes it’s anchor failure.

Two of those five – hinge anchorage and loose glass – are genuinely dangerous. Don’t wait if you catch them.

Replacement Cost & What’s Included

In Glendale, a Mr-Glass bathroom remodel runs $9,000 to $28,000. Here’s how the pricing breaks down for common jobs:

Job Installed Range (Glendale)
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the number up is usually glass, tile complexity, and plumbing relocation. What keeps it down is a straightforward swap where the layout stays put.

Parts-plus-labor is quoted separately so you can see the line items. Every price change is written down as a change order before the work happens. And every job carries the 90-Day Done Right Promise: if we get it wrong, one call brings Tom back.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Some things are worth checking yourself. Grab a flashlight and look at the door track for grit. Run a finger along the seams where the enclosure meets tile and see if you come away with crumbling caulk. Check whether the door swings true. Those are safe inspections, and they tell you whether you have a maintenance issue or a real failure.

What you shouldn’t do yourself is replace hinges, pivot pins, or hardware anchored to tempered glass. A frameless shower door weighs 80 pounds or more. When a hinge fails mid-installation, the glass can shatter, and the injury is real. We’ve talked to too many people who learned that the hard way.

For a swap like this, call us at (844) 560-4526. We’ll look at it, price it, and tell you plainly whether a repair or a full replacement is worth your money. Estimates are free, and so is a second opinion on any written quote.

FAQs

Schedule Your Free Estimate

Whether you’re nursing a failing Mr-Glass enclosure back to life or finally ready to tear out a bathroom that’s been on the list for years, we’re twenty minutes away and happy to take a look. Every Glendale job gets permits pulled and inspected where required, background-checked crew members on every visit, and an owner’s name on the contract – not a call center. A live person answers at (844) 560-4526 around the clock. Call today to schedule your free estimate and put a written price on the job.

Written by the team at Barrett & Sons Construction Glendale, serving Glendale and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 560-4526
Local Service Coverage

Request a Free Estimate in Glendale

Tell us what you need - Barrett & Sons Construction Glendale responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch